Rocker Arm shafts - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Rocker Arm shafts

Print Thread

Rocker Arm shafts #885206 12/21/10 07:05 PM 12/21/10 07:05 PM
Joined: Jan 2005 Posts: 1,776 Keymar, MD DusterKid OP top fuel
DusterKid OP top fuel Joined: Jan 2005 Posts: 1,776 Keymar, MD	Are the rocker arms shafts of factory rocker arms and the ones used for the crane gold rockers the same?

Re: Rocker Arm shafts [Re: DusterKid] #885207 12/21/10 07:13 PM 12/21/10 07:13 PM
Joined: Nov 2004 Posts: 3,544 Syracuse,NY CompWedgeEngines master
CompWedgeEngines master Joined: Nov 2004 Posts: 3,544 Syracuse,NY	NO. RIP Monte Smith Your work is a reflection of yourself, autograph it with quality. WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.

Re: Rocker Arm shafts [Re: CompWedgeEngines] #885208 12/22/10 10:13 AM 12/22/10 10:13 AM
Joined: Feb 2004 Posts: 3,441 Mo. S supercomp master
supercomp master S Joined: Feb 2004 Posts: 3,441 Mo.	Still to thin for roller cam IMO.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1