Street Hemi oil pan - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Street Hemi oil pan

Print Thread

Street Hemi oil pan #863654 11/25/10 10:43 PM 11/25/10 10:43 PM
Joined: Jun 2010 Posts: 31 Hartville OH M mini340hemi OP member
mini340hemi OP member M Joined: Jun 2010 Posts: 31 Hartville OH	I picked up a 6QT. street Hemi oil pan,is is a copy of the 70-71 E body pan but is said to fit most B bodies too. I just set it next to a 5QT. pan and now I'm worried about it fitting in a 67 Coronet R/T stock K frame. The sump is alot bigger in the front. Anybody do this? P.S. This is a 440 and a original 440 K frame. Last edited by mini340hemi; 11/25/10 11:53 PM.

Re: Street Hemi oil pan [Re: mini340hemi] #863655 11/26/10 12:28 AM 11/26/10 12:28 AM
Joined: Feb 2005 Posts: 4,316 Prospect, PA BSB67 master
BSB67 master Joined: Feb 2005 Posts: 4,316 Prospect, PA	It fits my 67 Charger

Re: Street Hemi oil pan [Re: mini340hemi] #863656 11/26/10 12:32 AM 11/26/10 12:32 AM
Joined: Jan 2003 Posts: 75,058 U.S.S.A. JohnRR I Win
JohnRR I Win Joined: Jan 2003 Posts: 75,058 U.S.S.A.	Quote: I picked up a 6QT. street Hemi oil pan,is is a copy of the 70-71 E body pan but is said to fit most B bodies too. I just set it next to a 5QT. pan and now I'm worried about it fitting in a 67 Coronet R/T stock K frame. The sump is alot bigger in the front. Anybody do this? P.S. This is a 440 and a original 440 K frame. Will fit fine , but it will be close to the K and almost flush with the bottom , in a 70 that pan had a skid plate on the K. Just an FYI there is no specific 440 K frame , that K is the same used for ALL V8's in that body , except the hemi .

Re: Street Hemi oil pan [Re: JohnRR] #863657 11/26/10 12:50 AM 11/26/10 12:50 AM
Joined: Jan 2007 Posts: 153 Wpg, Mb, Canada S six-barrel member
six-barrel member S Joined: Jan 2007 Posts: 153 Wpg, Mb, Canada	It fit my 67 R/T, no issues

Re: Street Hemi oil pan [Re: six-barrel] #863658 11/26/10 08:41 AM 11/26/10 08:41 AM
Joined: Jun 2010 Posts: 31 Hartville OH M mini340hemi OP member
mini340hemi OP member M Joined: Jun 2010 Posts: 31 Hartville OH	Thanks guys, I have the engine in Ohio and my brother has the car in Wisconsin, just didnt want any suprises during installation.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1