{{{{ RIGHT ANGLE OIL FILTER ADAPTER }}}} More Questions
#772585
08/12/10 07:39 PM
08/12/10 07:39 PM
|
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
rickstershemi
OP
master
|
OP
master
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
|
Anyone have one or know who might have one in stock.....I have ck'd a few sources and the MP unit is on national back-order with know delivery date.....  Thanks in advance, Rickster
Last edited by rickstershemi; 08/23/10 02:44 PM.
|
|
|
Re: {{{{ RIGHT ANGLE OIL FILTER ADAPTER }}}}
[Re: MR_P_BODY]
#772590
08/13/10 12:45 AM
08/13/10 12:45 AM
|
Joined: May 2003
Posts: 15,487
Florida
scratchnfotraction
I Live Here
|
I Live Here
Joined: May 2003
Posts: 15,487
Florida
|
PM sent rickster  you can allways drill it to 1/2" and massage the 90* turn and gasket match it along with all the other oiling mods to the oil pump and rear main cap and drilling the 9/32 oil galleys...well you know.. i got the 9/32 drill bit and the short 1/2 drill bit..just dont have the 10-12 inch bit for the deep one to the oil filter 90* the last one i did,i spent most of the time in the 90* the fliter plate and removeing the cross section of the factory drill bit end flukes man the things you can do with an angle grinder and a dremal tool and about an 18 pack of miller light  I had about 40 hrs in the home gasket match,home pocket port,block stress relieveing did the main webs and all to the oil gally and return holes opend up  herb and hensleys little blue book,I wish I could find another copy of it all I gots left is a rag with herbs oil mods on a 360 left
|
|
|
Re: {{{{ RIGHT ANGLE OIL FILTER ADAPTER }}}}
[Re: justinp61]
#772591
08/13/10 08:33 AM
08/13/10 08:33 AM
|
Joined: Nov 2008
Posts: 660
San Diego
formula S
mopar
|
mopar
Joined: Nov 2008
Posts: 660
San Diego
|
Quote:
There was a couple for sale in the A engine section. I had trouble getting the gasket set for mine.
I just bought two kits from our local Dodge dealer part# P5249320 oil filter adapter gasket kit. try here http://www.mopartsracing.com/parts/a.html
|
|
|
Re: {{{{ RIGHT ANGLE OIL FILTER ADAPTER }}}}
[Re: formula S]
#772592
08/13/10 10:45 AM
08/13/10 10:45 AM
|
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
rickstershemi
OP
master
|
OP
master
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
|
Quote:
Quote:
There was a couple for sale in the A engine section. I had trouble getting the gasket set for mine.
I just bought two kits from our local Dodge dealer part# P5249320 oil filter adapter gasket kit. try here http://www.mopartsracing.com/parts/a.html
Been there done that.....anyway I've decided to just pick up the stock plate and fitting for now and may go with either a moroso or canton remote setup down the road....right now I just need to get the moder primed and the lifters pumped up.
Thanks
Rickster
|
|
|
Re: {{{{ RIGHT ANGLE OIL FILTER ADAPTER }}}}
[Re: rickstershemi]
#772593
08/13/10 11:24 AM
08/13/10 11:24 AM
|
Joined: Feb 2009
Posts: 2,034
NW Indiana
deansrr
top fuel
|
top fuel
Joined: Feb 2009
Posts: 2,034
NW Indiana
|
my warehouse has one in stock #DIRP5249624, $160 plus shipping. your clamps are on their way, bill you after i get back from nats, http://www.tdperformance.com/products/?id=3314 this is what i'm using on my 340, $62 +, dean
Last edited by deansrr; 08/13/10 11:37 AM.
1973 Road Runner
1974 Satellite (for sale)
1973 240z (wifes)
1993 Ramcharger (thanks Devil)
2002 Honda S2000
|
|
|
Re: {{{{ RIGHT ANGLE OIL FILTER ADAPTER }}}}
[Re: rickstershemi]
#772596
08/23/10 02:47 PM
08/23/10 02:47 PM
|
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
CompWedgeEngines
master
|
master
Joined: Nov 2004
Posts: 3,544
Syracuse,NY
|
Big round gasket ( obvious..lol) against the block and adapter plate, small metal cored gasket under the head of the bolt, cork gasket at end of bolt, but UNDER the plate, so it seals between the plate and the block.
RIP Monte Smith
Your work is a reflection of yourself, autograph it with quality.
WD for Diamond Pistons,Sidewinder cylinder heads, Wiseco, K1 rods and cranks,BAM lifters, Morel lifters, Molnar Technologies, Harland Sharp, Pro Gear, Cometic, King Engine Bearings and many others.
|
|
|
Re: {{{{ RIGHT ANGLE OIL FILTER ADAPTER }}}}
[Re: CompWedgeEngines]
#772597
08/23/10 02:49 PM
08/23/10 02:49 PM
|
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
rickstershemi
OP
master
|
OP
master
Joined: Jul 2006
Posts: 9,366
Lehigh Acres, Florida
|
Quote:
Big round gasket ( obvious..lol) against the block and adapter plate, small metal cored gasket under the head of the bolt, cork gasket at end of bolt, but UNDER the plate, so it seals between the plate and the block.
Thanks I have the cork one and the large one, now to dig up the metal one 
Rickster
|
|
|
|
|
