Now for the special thx section of this post. Up first we have:
Mr. Dave Walden - ECS Automotive.
1. Complete sticker kit w/door vin sticker.
2. Dash tag transfer.
3. Front & rear date coded glass.
4. NOS dated coded fuel filter w/hoses.
5. NOS date coded voltage regulator.
6. Carb stickers.
7. Carpeting.
Jules - The Wiperman
1. Restored heater box supplied to him by my good friend Jim Miner.
2. Wiper motor.
Jimmy Ridge - Dixie
1. Alternator.
2. Starter.
David Tays (Plumbeeper)
Restored steering wheel - Compared to my survivor, his work is as close to original that you'll find on the planet.
Dales Cuda Shop
1. Complete exhaust system - Absolutely no drama installing, very nice piece.
2. Correct Challenger outside door handles.
3. Antenna.
Mike Mancini - Instrument Specialties
Complete gauge and bezel restoration, simply beautiful.
Wayne Brewer - Brewers Performance
All 4-speed parts including the column lockout linkage. Can't say enough good things about Wayne.
Frank Battleson
Dated coded hoses.
Bob Groser - Fine Lines
1. Brake/fuel lines.
2. Emergency brake cables.
3. Reinstalled prop. valve brackets.
4. Small rubber boot on the prop. valve.
Matt - MCB
1. Restored grille.
B/E & A Restoration Parts, Inc.
All the parts supplied by this low rent company were NOS pieces right off their shelve.
1. Side marker lenses and bezels.
2. Tail light lenses and bezels.
3. Front parking light lenses.
4. Inside door handles.
5. Inside lock levers.
6. Cowl screens.
7. Chrome radio knobs.
8. Drivers side mirror.
9. 3 piece tail trim.
Excluding the last one, anyone of these companies are in my "Good Guys and Buddy Club". It's a real pleasure dealing with quality people with good product, it sure makes putting together one of these heaps much easier.
.JPG){kind=link}
