|
Re: Copper Spray or HighTack - Shim Head Gasket?
[Re: 68LAR]
#596000
01/27/10 09:34 PM
01/27/10 09:34 PM
|
Joined: Dec 2007
Posts: 18,160 Mass
DAYCLONA
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 18,160
Mass
|
Quote:
Are you using iron or aluminum heads??? I use the copper spray for iron heads, but use the high temp aluminum ceramic rattle can for aluminum heads.
...Permatex Gold works great on Iron, I've done the silver/alumimun spraybomb on Iron heads as well, great results,....Copper is tougher to pull a head later on though
|
|
|
Re: Copper Spray or HighTack - Shim Head Gasket?
[Re: VanishPt]
#596001
01/27/10 09:37 PM
01/27/10 09:37 PM
|
Joined: Dec 2007
Posts: 18,160 Mass
DAYCLONA
I Live Here
|
I Live Here
Joined: Dec 2007
Posts: 18,160
Mass
|
Quote:
these are al heads and an iron block
Go with the Silver/Aluminum ceramic header paint, spray the gasket fully both sides, install wet, no need to spray the block deck, or head, just the gaskets sides, have everything ready, torque to spec
|
|
|
|
|
|