Aussie Hemi and stuff pics
#574
06/30/03 06:44 PM
06/30/03 06:44 PM
|
Joined: Jan 2003
Posts: 104,346 Garden Grove, CA
OzHemi
OP
Penguin-hating Ginger
|
OP
Penguin-hating Ginger
Joined: Jan 2003
Posts: 104,346
Garden Grove, CA
|
Well, I finally went through all the spare parts that came over in the container with John's Daytona, and thought I would post a few pics for those that might be a little curious about the Aussie stuff for what ever reason
Here is an Aussie K frame for the hemi...as you can see, no steering box mounts! (it mounts to the K frame, the engine mounts are tied to it with a piece of wire on the corner)
Here are a couple of pics of what a 265 hemi short engine looks like..
A hemi starter motor...looks sort of like a "real" hemi one huh?
Here are some intake/exhaust manifolds for a standard 2bbl set-up... note in the second one the cool dual outlet exhaust manifold !
Here is a pic of a modified small block 904 case to suit the hemi, as you can see, thier bolt patterns are close, you just have to add a few holes..
And finally, a head shot..
Hope these might have been a teenie bit of interest to a few folks..just something different! Oh, and I got some spare door handles and such, and the part #'s all start with an "A", must be to denote Australian maybe?
|
|
|
Re: Aussie Hemi and stuff pics
[Re: OzHemi]
#576
06/30/03 07:23 PM
06/30/03 07:23 PM
|
Joined: Jan 2003
Posts: 4,555 Wisconsin
beeper71
moparts member
|
moparts member
Joined: Jan 2003
Posts: 4,555
Wisconsin
|
Cool stuff Oz! Pretty easy to ID that block with the big 265 cast into the side of it! Any more goodys to show us? How 'bout a pic of the chamber on that head?
|
|
|
Re: Aussie Hemi and stuff pics
[Re: FastOne]
#578
06/30/03 07:32 PM
06/30/03 07:32 PM
|
Joined: Jan 2003
Posts: 3,472 Lubbock, TX
Erics5th
UsedtobeSatellite6
|
UsedtobeSatellite6
Joined: Jan 2003
Posts: 3,472
Lubbock, TX
|
Very intresting, thanks for sharing the pics Oz. Where aluminum versions offered like the slants? Wish they where offered here in the US!
Eric
|
|
|
Re: Aussie Hemi and stuff pics
[Re: OzHemi]
#582
06/30/03 07:54 PM
06/30/03 07:54 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Quote:
Aussie Hemi and stuff pics
I was hoping that the "stuff" pic's where going to be beer.
Holding out on us Jeff
|
|
|
Re: Aussie Hemi and stuff pics
[Re: FastOne]
#588
06/30/03 11:06 PM
06/30/03 11:06 PM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
That's pretty, and a little scary
It looks like I'm going to be attacked by 6 little smiley's
Nice job on the head!!
|
|
|
Re: Aussie Hemi and stuff pics
[Re: OzHemi]
#589
06/30/03 11:08 PM
06/30/03 11:08 PM
|
Joined: Jan 2003
Posts: 1,632 TN
JS29R0B
top fuel
|
top fuel
Joined: Jan 2003
Posts: 1,632
TN
|
|
|
|
Re: Aussie Hemi and stuff pics
[Re: JS29R0B]
#590
07/01/03 12:25 AM
07/01/03 12:25 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
Dang, them look nice!!!
|
|
|
Re: Aussie Hemi and stuff pics
[Re: RichV]
#591
07/01/03 01:05 AM
07/01/03 01:05 AM
|
Joined: Jan 2003
Posts: 104,346 Garden Grove, CA
OzHemi
OP
Penguin-hating Ginger
|
OP
Penguin-hating Ginger
Joined: Jan 2003
Posts: 104,346
Garden Grove, CA
|
Quote:
Can you get a Aussie set of lower ball joints for an A body. I hear they have shorter steering arms.
I can get anything
I might have some old lower ball joints off my charger (not sure if i threw them away when i swapped them) but I can measure the ones on the car as well if you were curious.
TrWater..
Glad everyone else likes the info/pics so far!
|
|
|
Post deleted by moparts
#592
07/01/03 01:09 AM
07/01/03 01:09 AM
|
Anonymous
Unregistered
|
Anonymous
Unregistered
|
|
|
|
Re: Aussie Hemi and stuff pics
#593
07/01/03 02:38 AM
07/01/03 02:38 AM
|
Joined: Jan 2003
Posts: 1,420
FastOne
pro stock
|
pro stock
Joined: Jan 2003
Posts: 1,420
|
265 has 3.91 inch bore & 3.68 stroke, 1.96 intake valves, 1.60 exhaust valves
245 has 3.76 inch bore & 3.68 stroke, 1.845 intake valves, 1.50 exhaust valves
215 has 3.52 inch bore X 3.68 stroke
Oops! almost forgot, the head in the picture is a 245 head taken out to the max with Chevy 11/32 stem 2.00 (2.02 milled down) nailhead race valves & 1.60 Chevy exhaust
Last edited by FastOne; 07/01/03 02:42 AM.
|
|
|
|
|