|
Re: comression estimate
[Re: CIB]
#555548
12/16/09 06:58 PM
12/16/09 06:58 PM
|
Joined: Jul 2008
Posts: 26 Annapolis, Md
71TrakPak
member
|
member
Joined: Jul 2008
Posts: 26
Annapolis, Md
|
If they are still in the motor measure how far down in the hole they are at TDC. If you take a straight edge accross the bore and feeler gauge the gap that works best. Then cc the heads. from there you can get a fairly accurate estimate otherwise your just guessing because there are too many variables.
1971 Charger R/T 4spd
|
|
|
|
|
|