Dana 60 width? - Moparts Forums

Register Log In Moparts Forums Best of Moparts / Tech Archive Dana 60 width?

Print Thread

Dana 60 width? #53762 02/03/08 03:19 AM 02/03/08 03:19 AM
Joined: Apr 2005 Posts: 12,271 Overpriced Housing Central RobX4406 OP I Live Here
RobX4406 OP I Live Here Joined: Apr 2005 Posts: 12,271 Overpriced Housing Central	I know that list in the tech archives is jacked up. I have a Dana 60 that is roughly 56.5" wide flange to flange and thought it may be an e-body. It has the pinion snubber on it. Anybody have an accurate listing of Dana 60 widths so I can figure this thing out. TIA

Re: Dana 60 width? [Re: RobX4406] #53763 02/03/08 03:34 AM 02/03/08 03:34 AM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	I have posted this several times. Someone needs to put this list in the tech archives. Dana 60 rearend specs: '66 B-body 54 1/4" housing, 59 3/8" axle flange to flange, 44" perch 23 spline power-lock sure-grip, 1330 U-bolt yoke '67 B-body 54 1/4" housing, 59 3/8" axle flange to flange, 44" perch 23 spline power-lock sure-grip, 1330 strap yoke '68-'69 B-body 54 15/16" housing, 60 1/16" axle flange to flange, 44" perch, 23 spline power-lock sure-grip, 7290 yoke '70 B-body 54 15/16" housing, 60 1/16" axle flange to flange, 44" perch, 35 spline power-lock sure-grip, 7290 yoke '71-'72 B-body 57 7/8" housing, 63" axle flange to flange, 47.3" perch, 35 spline track-lock sure-grip, 7290 yoke '70 E-body 56 31/64" housing, 61 5/8" axle flange to flange, 46" perch, 35 spline power-lock sure-grip, 7290 yoke '71 E-body 56 31/64" housing, 61 5/8" axle flange to flange, 46" perch, 35 spline track-lock sure-grip, 7290 yoke Contact info

Re: Dana 60 width? [Re: DoctorDiff] #53764 02/03/08 01:17 PM 02/03/08 01:17 PM
Joined: Apr 2005 Posts: 12,271 Overpriced Housing Central RobX4406 OP I Live Here
RobX4406 OP I Live Here Joined: Apr 2005 Posts: 12,271 Overpriced Housing Central	Quote: I have posted this several times. Someone needs to put this list in the tech archives. Thanks The bogus table needs to be pulled or updated to the correct lengths. I know more than one person that did an A body 8 3/4 to the 51.40 length only to find out it's not correct. I'd make an updated list/table if I could get all the correct 8 3/4 and Dana lengths

Re: Dana 60 width? [Re: RobX4406] #53765 02/03/08 01:23 PM 02/03/08 01:23 PM
Joined: Jan 2003 Posts: 8,016 Polson, MT DoctorDiff master
DoctorDiff master Joined: Jan 2003 Posts: 8,016 Polson, MT	Even though the chart located in the tech archives is full of misinformation, correct 8 3/4" specs are also listed. http://www.moparts.com/Tech/Archive/axle/16.html Contact info

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1