Dyno rear wheel HP/TQ how to estimate gross engine HP/TQ ?
Chassis Dyno results to the rear wheels: 330 HP to the rear wheels peaking at 4800 to 5000 rpm , and 405 ft/lbs torque peaking 3600-3700 rpm .
I have a 70 cuda, mostly factory stock equipped B-block engine (stroked to 431 ci) MR 6 PK cam, stock heads with power steering & all stock factory accessories driven, A-833 4 spd trans , & 8¾ sure-grip rear with 3.23 gears.
Dyno operator suggested a figure of approx 18% losses to calculated 1970 type gross engine ratings, so therefore that works out to approx 400 HP & 490 ft/lbs if comparing to 1970 engine Gross ratings . Does this sound reasonable ?, Has anyone had a chassis dyno after a engine dyno with a similar combo – PS, acc driven, 4 spd, & 8¾ rear , to know what HP or TQ losses are typical to my driveline . thanks Doug ,
dougandcindy@sympatico.ca ( moparts user SCHU ).