i am putting caltracks on my dart and i need to lower and get 5" of play in the frontend of my dart.so my question is how do i lower and get the 5" of play in my front end? thanks and i hope this is not to dumb of a question.

No such thing as a dumb question ......
Could you explain "5" of play" and why you need that particular amount ? I assume it`s in upward travel ?

caltracks said that is what thay need to work to there fullest and yes im talking about upwards travel. thanks for not thinking it was a dumb qustion.

You can lower the front with the torsion bar adjustment bolts. It's a bolt in the center of the lower control arm near the frame rail end.

thanks. will this change the front end alignment?

you can also trim the lower control arm bumper to lower it some more

I run cal-tracs and trimmed the upper rubber stop way down and as Cab said, I also trimmed the lower stop to 1/2" in height and made sure I had a 1/2" of air gap bet. the lower stop and controll arm so it won`t ride like a truck.

thanks for the help guys.