WANTED 1968-69 street hemi left over parts from restorations. Also wanted NOS MOPAR parts only rally dash gauges 2857 169-70-71-72. Power steering hose 2537 980. Steel wheels 15X6JK, and hemi starter heat shield.

I have a few sets of 426 Hemi spark plug tube seals. They press into the head to help keep oil out of the cylinders. They are New, anodized black with O-rings. They are easily pressed in and can be installed anytime you change plugs.
90.00 per set includes shipping in USA. add 3.00 if using paypal.
Text me and I'll send photos. I couldn't load photos, sorry.
Dave's Hot Rod Garage Inc
734-231-070five

Thank you for the ad!

Also one freshly built set of 426 Hemi rockers, restored original arms with new shafts, new Purple anodized stands,New adjusters. Shafts disassembled and clean out burrs and crud. All parts inspected, cleaned and oiled. Correct assembly after mock up on an original head to correct the rocker to valve tip alignment. Bagged and ready to install. 2475.00

Original 426 Hemi intake manifold. 1969-1971 version cast after the mold repair on cylinder #7. Excellent original part is all cleaned up already. Nice threads too. 750.00 -- sold
New in box - 426 Hemi intake manifold by Mopar performance. Includes instruction sheet. 850 sold

Reproduction of the original throttle linkage for the street Hemi. 90.00 includes shipping in USA. I have both regular and extended length.

Dave's Hot Rod Garage Inc
734-231-0705 I could not load photos. If you text me I can send you photos.
Thank you for the ad!

For Hemis Only Stage V heads new never used, mocked up, or bolted on engine.
Intake ports are grooved for oring style gaskets
Located in Valparaiso Indiana
$6500

Dyno use only, Milodon Pro Touring 7 qt oil pan with 1/2" pick-up. This was installed on a Moran built 472 hemi that I changed out for a factory street hemi pan, very good shape, no street miles, $450 plus shipping. PM me here for info and pictures.

head gaskets are SOLD. Open to offers on the remaining items

3 ea. Valve cover gaskets. 2 Mopar performance, 1 felpro (a little thinner) Cork.
Note: appear fine but may have shrunk slightly as they are cork. Common issue fixed by hot water.

8 ea. Spark plug tubes for use with stock height covers. Installed one time.
1 pr. Of polishing tools for the inside and outside the spark plug tube.“seating” area. N/C Included with tubes.

6.5 Cans of Street hemi orange engine paint part #P 4349216AB. Cans were purchased in a lot of 12.
They were shipped in two bags. 6 cans each in one box. One can cut loose in shipment ☹. They have been kept in climate-controlled storage and have all been tested.
Getting hard to find OEM Mopar engine paint.

Would prefer to sell all as a lot at 150.00 + shipping or OFFER
Will ship with pre payment

Many years back when I installed a Hemi crate in my 68 R/T, I devised a factory looking bracket and kit to allow use of the existing accel cable and Kickdown linkage.
I have 11 brackets and hardware for the kits. The kit will bolt right on to a single 4 or other intake and looks like the factory made it.
It can also be used with a manual trans or Automatic as the pivot point for KD linkage included but separate .
The threaded rod, couplings and locknuts are used to lengthen the Top and mid KD rods if needed. They are included.

I've looked for a better pic of the kit installed but haven't found it yet frown

100.00 with shipping and insurance to the lowerr 48. Open to reasonable offers.

I will consider selling All kits at a substantial discount.
PM me if interested beer

One pair of 426 Hemi Rocker Arms. Rocker arms are complete (adjusters, hardware, springs, etc.). Two rocker arms have slight pitting on the face but the remaining look fine.

$1,500 for the pair plus shipping. I can deliver to Carlisle in July (with deposit) if needed. If you need additional photos or info, just send me a PM with your number and I will give you call.

Stan

matched set of 1970 hemi 4speed carbs dated h9 4745s and h9 4742 s . in good restorable condition $7500.00 call 304 797 0607

Street Hemi intake, early with part number. no pentastar. has original carb studs . 650.00
4.150 Stroke crankshaft, slightly used, could use a polish. Nothing was broken, No damage! Was removed to install a 4.500" stroke
Standard Hemi/440 Mains
2.200 Chevy rod journals- Smaller Chevy journal makes it easier to clear the oil pick up tube ! Also lots more choices of rod bearings.
8 bolt flange
One slug of mallory heavy metal (Mallory) in each end
800 plus shipping ---(New is 1060 plus 300 for Mallory)
426 Hemi Rockers set up. new billet aluminum stands, shafts and adjusters. Restored rockers. Rockers are shimmed to correct tip to valve alignment. Beautifull set up ready to bolt on. 2450.00
Also selling a used Hemi rocker setup, 1000 -sold
Super nice Original Hemi Choke assy for rear carb 450
Reproduction Hemi oil dipstick tube, sleeve and bracket assy 90 ea shipped
Hemi spark plug tube seals, 90/set shipped
Thick Hemi Damper washer 25
Short Hemi Alternator bracket 25
Street Hemi progressive Carb linkage, nice reproduction 95 shipped
Intake bolt kits fit Stage 5, Barton & Indy manifolds. some tunnel ram too. 45.00 shipped
***Street Hemi reproduction Carb fuel fittings coming soon
3 sets of repop Hemi exhaust manifolds, 1200 pair plus shipping.
NOS street hemi intake new in box 850 sold
Vanke modified intake 650
Intake bottom shield 250.00
New Edelbrock dual quad intake, still in box 650
AAR TA style air cleaner adaptor ring, mounts on Hemi Shaker Base to create fresh air intake for a 426Hemi on and E body, 250 with new seal
New bracket for space saver cannister 45.00
***426 Hemi intake bolt kits for Original manifolds, consists of 6 studs, 10 bolts and 6 tall nuts -- 22 piece kit. Really nice parts 125.00 shipped to you!
xtra new and used Stage 5 rockers, 1.6 and 1.7 180-200 ea
accept paypal or cash. paypal fee is 3%


Dave's Hot Rod Garage Inc
734-231-070 Five text me and I'll send photos. Text and Calls are best!!!!
Thanks

$35,000 obo

Engine:
Brand new 605 Hemi with 11:1 built by Ron Farley
This engine has 10-15 minutes of idle time on it, and I have not even been down the road yet with it. 0-miles on it.
New comp street friendly solid roller cam .704 lift
New roller lifters, forget what brand
Reduced valve spring pressure from what I normally run to better street it
Custom upper rocker & valve spring oiling to help keep eveything alive on the street (spray bars)
Brand new Callies cast iron block.
Block is internally coated in glyptol to promote oil drain back
Has a 12 quart custom pan with AN16 pick up
Milidon pump and cover
Indy Hipo big valve heads, flow sheets available on request.
Indy 426-3 big 4500 intake ported by me
Holley G3 1250 4500 carb comes with it
Indy valve covers
Indy Rocker Arms
Mezeire big water pump

Complete 472" ready to run.
New Scat 4.150 crank, Manely Rods, ARP Bolts, Diamond Pistons, 10.5:1 compression.
Mopar Performance block, Iron heads (2007). Heads have been freshened with new manly valves. comp cam, comp hydraulic lifters. Indy roller tip rocker arms. Will have 2 4-bbl with linkage and air cleaner assembly.
TTI headers.

OEM B/E body K member and mounts. Complete 4-speed w/scatter shield OR automatic w/converter. You can choose.


$27,500 OBO

$22,500 OBO Motor Only

MORE PICS TO COME

Waco, Texas

426 Hemi pistons have had for 30 years still in boxes cross referenced from the hustle stuff catalog $450

I have 2 1968 426 hemi Carter fuel pumps up for sale. One is dated J-7, so 9-67 and the other is an M-7 or 12-67. These are core units to rebuild. Asking 500.00 each. Please PM me here for additional details, or photos. *Update* M-7 dated pump is sold.
Matt

I am looking for a reproduction p5153737 dual quad intake. It is for a non original hemi cuda, so I don't need an original... They are on backorder from Mopar with no estimated delivery. Thanks Craig.

I have a new Edelbrock dual quad single plane that I would be willing to trade if someone wanted it.

Original set of 16 426 Hemi Rocker Arms and 4 stands and springs. Price reduced. $600 plus shipping or pick up on Long Island. rich1981@optonline.net

Mopar 1 Pr. freshly restored 1966 to 1969 426 HEMI black wrinkle finish valve covers $1150.00 for the pair (708) 288-2879

Mopar 1966 , 1967 & 1968 426 HEMI single grove crank pulley for cars W/O power steering, nice used original $250.00 (708) 288-2879

426 Hemi intake bolt kits. Excellent quality kit for 1968-1971 Hemi intake manifold. Made and tested here is the USA, no offshore components. Torque tested to insure quality.
125.00 each includes shipping. Paypal preferred or cash pickup.
Dave's Hot Rod Garage
Seven 34- two31-070 Five. Call or text.
Thank you, Dave

Wholesale pricing available if buying 10 sets or more