Rebuilt 2098830 Alternator dated 7 66. Used on various applications from 62 through 65, 35 A.
Has the following:
-New Stator
-Rebuilt Rotor
-New Bearings
-New Diodes
-New Brushes
-2095430 pulley, I believe was NOS

Tested after rebuild for proper output voltage.

$150.00 plus shipping

1969 & up Dana 60 pinion snubber for "B" & "E" body cars, nice used condition $250.00 (708) 288-2879

1 Pr. 1966 to 1969 426 HEMI valve covers, used original, not reproduction $850.00 for the pair (708) 288-2879

Mopar 1 Pr. 1968, 1969 & 1970 B-body HEMI leaf springs, nice used condition, came out of a 1969 Charger $850.00 for the pair (708) 288-2879

FOR SALE; I have had these two 1970 B-body Rally Dash Frames for over 30 years in my garage. They are dusty/dirty mainly but I did have to weld the center brace on the one dash and also where the dash speaker grill goes it had been cut back when the car was made, and they screwed up a little, so I welded that back. The other 1970 Rally dash is NOT a 3-speaker dash frame. It only had a couple screw holes that I welded up where a Tachometer bracket was attached. The dash frames as they are are $800.00 each, If you would like a dash frame blasted and put in primer, I can do that for an additional cost. I prefer that you pick the dash frame up at my shop or I may be able to ship but shipping will be very expensive. I have more pictures if interested.Both dash frames are NON-A/C dashes

Mansfield Pa

Mopar NOS 383 Road Runner pie tin, never installed $250 (708) 288-2879

For sale: new white bucket seat and rear seat covers for 1971 B-body, standard vinyl,
From Legendary, ordered years ago, never needed, stored in a plastic bag and in a Legendary box, inside the house, $800
Can send pictures, for some reason not able to load pictures here
Email: ebodycab@msn.com or phone: 818-426-8685

NOS 2444442 Starter Relay


Date Code 108 (10th week of 1968)


Auto Trans Only!


85.00 plus shipping. PayPal preferred.


Bill Rolik


bremotorsports@verizon.net


201-394-5533 Cell/Text

Mopar 1966 & 1967 Bibody 4-speed clutch pedal assembly $300.00 (708) 288-2879

1970 & up Air Grabber flapper assembly for the air box on cars with an Air Grabber hood, original not reproduction $375.00 (708) 288-2879

1970 only six way seat track. I’ve disassembled this completely and bead blasted this. It was not rusted and in good shape before I started. I was going to use it in my Charger but decided to just use my regular tracks. It is not a reproduction. I’ve had it much longer than the junky Chinese reproductions have been out. They no longer make the reproductions they were too expensive and junk. One stud was broke but I welded in a new one. $950 plus shipping from Texas. ***SOLD****

2.25" x 18" Long B-Body Resonators:

Brand new B-Body resonators - made in the USA. The ones pictured are 2.25" ID in/out, with 2.25" internal flowpath (also available in 2.5" x 16" L version). These are built just like OE with aluminized construction & spun-locked heads. These 2.25" versions are 4" round body diameter & 18" L bodies. As you can see, these are straight-through & non restrictive. They are Helmholtz tuner type resonators that knock-out some high frequencies. *These also accept the 71-4 shorty Bazooka tips that connect right off the outlet stub.

$75.00/ea. plus shipping.

Mopar 1 Pr. vintage Direct Connection big block tall chrome valve covers, never installed on an engine. $250.00 for the pair (708) 288-2879

Disc brake spindles, steering arms, and pin style caliper brackets. The caliper brackets have a 0965 4101 cast numbers. Looks like there may be a date code also, but hard to read. One of the steering arms has 2849 116247 cast numbers. The other parts do not have readable numbers. They are 73+ B-Body for the for the 11.75" rotors based on my thread in the MOPARTS question and answer section. $150 shipped anywhere in the US in a large flat rate box.

John Brough

NORS CA-305 2863349 Air filter Unsure of manufacturer or actual part number
OD 12-13/16", ID 11-1/16", Height 2-3/4", these dimensions are the same as some NOS CA-305 filters I have
I picked these up without any packaging from a swap meet a couple years back
The rubber is a little darker red than Fram, the perforation holes are smaller and not puckered. The inner screen does look to be metal.
Not the filter if you are going for an OE restoration but an economical choice if it is close enough for you.
Used on several 2 and 4 barrel applications from about 1968 until early 80's including 70-71 340, 383, and 440

$50.00 including shipping in lower 48 states.

3438177 optional hemi alternator. Restored with NOS parts. $2,500.00

NEW Mopar 1971-74 A-Body 1973-74 B/E-Body 72-73 C-Body Clutch / Brake Pedal pads. $15. includes shipping.

Contact 'kudakidd@hotmail.com'

Rebuilt 2098850 Alternator dated 51 67. Used on various applications from 62 through 65, 50 A.
Has the following:
-New Stator
-Rebuilt Rotor
-New Bearings
-New Diodes
-New Brushes
-2095059 pulley

Tested after rebuild for proper output voltage. I took a video but the file is huge, below is a screen shot of the meter during test.

$250.00 plus shipping

Here’s a nice pair of RR tail lights. Chrome is nice, and housing finish is great. $150

Shipping at actual cost.

PayPal friends and family, personal check or local pickup OK

Thank you,

Bill

Mopar 1969 & 1970 B-body 4-speed console top plate, nice condition for a used 55 year old part, as you can see in the pictures the black area will need to be repainted, also there are no broken studs on the backside $550.00- (708) 288-2879