Weighs 16lbs, Bottom 11Lbs mag, Top Alum 5lbs, as pictured
In good condition
$600 OBO, plus shipping, PM

a pic of the bottom shown below. It looks like a valley tray (not included bolts to bottom of manifold.
It's not included because I don't have it, but looks simple to fabricate out of a single piece sheet metal and drilling eight 1/4" holes.}

Looking for an Indy Hemi tunnel ram, 16 bolt in good shape - either 4150 or 4500 tops are fine.

PM me with what you have.

Thanx Moparts and Happy New Year !

Set of 16 original 426 Hemi Rocker Arms and 4 Stands $750 rich1981@optonline.net

426 HEMI valve covers 66-69 style
NIB older reproduction
Raw steel, ready for prep then paint, power coat or chrome.
SOLD SOLD SOLD
Local pickup welcomed in detroit, MI
US Postal money order only.

NOS Chrysler Mopar Thermostat 195*, $20

Original 1970 Hemi idle solenoid bracket and 2 retaining nuts, excellent condition, $250

Email Kenei@comcast.net

426 HEMI valve covers 66-69 style
NIB older reproduction
Raw steel, ready for prep then paint, power coat or chrome.
$600 obo
SOLD SOLD SOLD. THANKS

A pair of original 426 Hemi heat tubes; one NOS the other used. Some minor pitting on the used tube as shown in the photos. Note that the used tube eventually is painted engine orange after installation, so you address the pitting at that point. Please look at the pics closely for condition; more pics available if needed.

$650/pair, plus shipping. I'm never offended by offers.

TWSchuler@aol.com

I have other six-pack, T/A, NOS and nice used Challenger parts for sale. Message me for a list if interested.

Looking for an Indy 4500 Vanke intake for a Hemi.....or even the smaller 4500 intake I might be interested in as well.

Dragula426@gmail.com

For sale Edelbrock rat roaster three intake manifold base. It’s in decent shape. The four barrel top plate is cracked and in need of welding. All of the cracks or VEED out and ready for welding. Someone also hogged out the four butterfly holes in the top. If you just want the base it’s $175 reduced price plus shipping. If you want the top also it’s $225 Reduced price plus shipping from 11772 thanks, Rick

For Hemis Only Stage V heads new never used, mocked up, or bolted on engine.
Intake ports are grooved for oring style gaskets

Located in Valparaiso Indiana
$8200

One Pr. 1966 to 1969 426 HEMI valve covers, original not reproduction, freshly restored, ready to bolt on $1250.00 for the pair (708) 288-2879

These Carbs came with the engine I had built, and they are basically brand new with only engine run in time. They come with Carb Kits from AED and Quick Fuel Adjustable Secondaries.

$1380 for the pair plus shipping. ***SOLD***

Thanks

Mopar 426 Hemi Crate Engine Intake and Holley Carburetor , Located in Camarillo , CA $1200.00 plus shipping , I can’t seem to load pics , I will send some on request

Many years back when I installed a Hemi crate in my 68 R/T, I devised a factory looking bracket and kit to allow use of the existing accel cable and Kickdown linkage.
I have 11 brackets and hardware for the kits. The kit will bolt right on to a single 4 or other intake and looks like the factory made it.
It can also be used with a manual trans or Automatic as the pivot point for KD linkage included but separate .
The threaded rod, couplings and locknuts are used to lengthen the Top and mid KD rods if needed. They are included

I've looked for a better pic of the kit installed but haven't found it yet

185.00 per kit with shipping and insurance to the lower 48.

I will consider selling All kits at a substantial discount.
PM me if interested

Complete set of 7/16x20 Head Studs, nuts and washers for 426, 472 ,528, These are brand new never used.
Kit consists of,
10 Long Studs,
16 Medium Studs,
8 Short Studs,
26 - 6 point nuts,
8 - 12 point nuts
And 34 washers. No chinesium as I’ve had them for over 20 years. I believe they were supplied to Mopar performance by ARP at the time.

1 pair of Mopar performance composite head gaskets part #P4529456 made in USA

3 ea. Valve cover gaskets. 2 Mopar performance, 1 felpro (a little thinner) Cork.
Note: appear fine but may have shrunk slightly as they are cork. Common issue fixed by hot water.

8 ea. Spark plug tubes for use with stock height covers. Installed one time.
1 pr. Of polishing tools for the inside and outside the spark plug tube.“seating” area. N/C Included with tubes.

6.5 Cans of Street hemi orange engine paint part #P 4349216AB. Cans were purchased in a lot of 12.
They were shipped in two bags. 6 cans each in one box. One can cut loose in shipment ☹. They have been kept in climate-controlled storage and have all been tested.
Getting hard to find OEM Mopar engine paint.

Would prefer to sell all as a lot at 450.00 + shipping
Will ship with pre payment

Wanted: I need a 2 groove hemi alternator pulley. Thanks and let me know what you have. Text me at (605) 390-1950

1 Pr. 426 HEMI wide pad rocker assemblies, nice used condition $2000.00 (708) 288-2879

Looking for hemi aluminum cylinder head casting 112-M2. If you got one for sale and please pm me!

1 Pr. original 426 HEMI cylinder heads, one is dated 12-67, one is date 1-68, nice used condition, basically bare with a brand new set of Ferrea valves and locks $4500.00 for the pair (708) 288-2879

1 1968 426 HEMI Holley Super Stock crossram carb list #4236, excellent used condition $900.00 (708) 288-2879

Kellogg crank, standard/standard, polished by legendary Henry Velasco, super rare! $2500. Located in Palmdale, CA.
Email: ebodycab@msn.com or phone 818-426-8685

Mopar Performance 426 Hemi crossram intake manifold, P4532267, $1500. Located in Palmdale, CA. Pictures available upon request. Email: ebodycab@msn.com or phone: 818-426-8685

Factory original black wrinkle 1970-71 426 Hemi valve covers, in good original condition, $2500. Located in Palmdale, CA. Pictures available upon request. Email: ebodycab@msn.com or phone: 818-426-8685

New parts
Carb linkage fits 426 Hemi carbs 75.00
Reproduction oil dipstick assembly with bracket 75.00
Extra thick Damper washer specific to 426 Hemi 25.00
Special short alternator adjusting bracket 25.00
Nice used Mopar 426 Hemi crossram intake manifold, available with stock lid top plates for 1200.00
or with FHO top plates for 1500.00
Restored crossram carbs 4235 & 4236 2200.00 set
Used crossram carbs 4235 & 4236 1800.00 set

Dave's Hot Rod Garage Inc
Howell, Mi 48855
Text or calls Dave Rudziensky
734-231-070 five

Thank you for the ad.

Hemi Valve Covers Chrome pre rocker arm clearance by someone else by a high lift cam as you can see in the picture. Sticker will come off with some elbow grease will ship but buyer pays actual shipping cost. Price reflects condition $70 fiat dollars With breather shown in picture 120.00. PM me if interested. Located near Daytona Florida local pickup fine. Listing items on eBay under same name willing to work with Moparts members and cancel auction if we can agree on price. Lots of other items just getting around to listing everything is going to take a while. Tennis shoe not included.

SOLD SOLD SOLD SOLD SOLD

Hemi Dart Distributor 1968. Rare cast iron body, all ID tags present, tach drive, great working condition no shaft play. $500 fiat dollars will ship for actual shipping cost. PM me if interested. Also gave auctions on eBay willing to consider offers from Moparts members. Local pickup in Daytona Florida area. Lots of other parts just need to get them listed.

1Pr. Keith Black 426 HEMI Magnesium valve covers, nice used condition, not modified or damaged $1800.00 for the pair (708) 288-2879

Edelbrock #75245 2x4 Gen 2 HEMI Efi intake manifold
Never been installed or bolted down at all
Had it sitting on my project engine then decided to go with a tunnel ram
$ 740 from summit
I will take $550 plus actual shipping
Thanks and Pm me here

1 Pr. 1966 to 1969 426 HEMI valve covers, used original, not reproduction $850.00 for the pair (708) 288-2879

THESE ARE NEW, NEVER USED.

One piston used for mock up.

Race Tec Hemi Pistons 426 + .030 over, 375 stroke. See spec sheet photo

$700

Newrog1@aol.com
SE PA

One set of vintage Accel spark plug wires for 426 HEMI, nice used condition $250.00 for the set (708) 288-2979