I have a set of 340 T/A heads with valves,springs,correct offset rockers,shafts and pushrods. Some rockers are stuck,sitting for 20+ years(inside) and pulled from the engine a few years ago.Good shape overall but shouild be considered as rebuilder cores.No porting done to the heads. I'll add pics soon. Edit: Most rockers spin freely on shafts,some have limited travel for some reason but are not galled on the shaft. Located in Pittsburgh,PA 15229 Asking $3500.00 for all PM here,E mail to RTSrunner-at-yahoo dot com,text to 412.4oo.o974; Thanks RT
Never run/mounted, almost new #P5007065, as pictured One port was deburred, port cleaned up, and valve job, reported to flow 350cfm Heads were pressure tested, tech states there is lot more left in the heads flow wise. $1600 pair, plus shipping, PM, delivery east of Mississippi possible for extra fee
I'm looking for a single Poly 318 valve cover to cut up for use as a tool to view oil transfer on a running engine. Condition doesn't need to be perfect.
Please PM me here if you have anything. I'm located in NW Oregon.
Selling some stuff, making space- NEW Melling M72 SBM oil pump-$40 360 balancer-$30 stock rockers-cleaned-$30 340 rods-12 total SOLD Files too big on rockers, can text or email pics, parts in Lancaster, Ca. I accept PayPal, contact me here by PM or email at johnnycuda@verizon.net
1970 'Cuda,Lime Light,499 Indy S/R's 10.70's @125,street driven ALOT! 1966 Barracuda 360,now a 5spd,Hemi Orange,Hot Rod Air, New daily driver-2003 Ram 2500 Cummins 5.9 '69 Valiant 2-dr, sleeper! New project---1938 Dodge truck, plan is a 360 with a A500, AC, Calvert rear susp., rack and pinion front with coils.
NOS Mopar Performance P5007140 Magnum R/T cylinder heads
Stock/Super Stock legal per sanctioning body rules (please check to verify) Brand new bare castings, sitting on the shelf 20 years Detail as shown in the video. Hens Teeth.
These were aftermarket general performance heads which underwent the process to be deemed Stock/Super Stock legal per sanctioning body roles (please verify), before being unceremoniously discontinued by the powers that be at Mopar Performance. They are not OEM parts and were never used in production.
Saved for 20 years to support a racer "sometime in the future". The future is now.
$1200 for the pair.
Local sale/Meetup within 50 miles of Metro Detroit/Oakland County greatly preferred.
I really do not want to ship these heavy iron heads but if you insist, I will ship at buyer's expense. Ground shipping quotes from the local Fed Ex terminal: To zip 94306: $403.90 for the pair To zip 53158: $217.26 for the pair Shipping quote based on 56.5LBs per cylinder head, packaged with foam padded (Edelbrock) packaging including insurance. Quotes for reference only: If you prefer your own shipping account or would like to use pirateship or similar, we can work something out.
Original packaging (basically useless for shipping: One Layer of cardboard) disintegrated during a move years ago, and was disposed of.
I no longer accept electronic payment
Please PM for more details and/or telephone number.
*not exclusive to this site: Posted other places
Thanks, Rich
Rich H.
Esse Quam Videri
Nos Sealed Power lifters
[Re: Hot 340]
#3274059 12/04/2412:41 PM12/04/2412:41 PM
Very old but NEW unused stock hydraulic lifters for small block. Part #HT2011. They even smell old. All have a very consistent crown of .003 checked in my tool fixture. I'm going a different direction. $110 shipped east coast. Postal money order only. PM me here.
Original 340 oil pan and windage tray. 2 main cap bolts for mounting tray included. Parts need cleaning. Came from a 1972 340 $100 rich1981@optonline.net SOLD
Came out of a 70 E body serial number 0B406310. Build date of 5-7-70. I have more pictures. $2650 and pickup in Middle Tennessee. Email moparmafia@yahoo.com or PM
