Previous Thread
Next Thread
Print Thread
1968 Coronet rocker moulding pics needed #322548
05/19/09 10:29 AM
05/19/09 10:29 AM
Joined: Dec 2004
Posts: 275
Ont Canada.
H
Hardcharger65 Offline OP
enthusiast
Hardcharger65  Offline OP
enthusiast
H

Joined: Dec 2004
Posts: 275
Ont Canada.
Can anyone post some pictures of 1968 Coronet rocker mouldings on here as i dont have any for referance and need to see what they look like ??, thanks Moparts for the free post.

Re: 1968 Coronet rocker moulding pics needed [Re: Hardcharger65] #322549
05/19/09 06:43 PM
05/19/09 06:43 PM
Joined: Aug 2004
Posts: 1,047
Arizona
6
68CoronetRT Offline
super stock
68CoronetRT  Offline
super stock
6

Joined: Aug 2004
Posts: 1,047
Arizona
Quote:

Can anyone post some pictures of 1968 Coronet rocker mouldings on here as i dont have any for referance and need to see what they look like ??, thanks Moparts for the free post.




There are two different sizes (widths) that were made and it depends upon the model you have. I also believe (could be wrong) that the thinner ones were fluted rather than smooth.
My 68 R/T takes the wider mouldings.



Here is a picture of the correct front clamp but nobody reproduces them and if you use the one they send in the kits you will have to re-drill the fender to get it to work.


Re: 1968 Coronet rocker moulding pics needed [Re: Hardcharger65] #322550
05/21/09 11:15 AM
05/21/09 11:15 AM
Joined: Nov 2008
Posts: 671
Wisconsin USA
B
Bill MeLater Offline
mopar
Bill MeLater  Offline
mopar
B

Joined: Nov 2008
Posts: 671
Wisconsin USA
'68 Coronet 440 had fluted ones, the drywall screws holding them on were an option selected by the previous owner...I sorta like it...

5243697-015s.jpg (175 downloads)






Powered by UBB.threads™ PHP Forum Software 7.7.1