67-76 A Body Black Front Kicker Panels #1-2663129, #1-2663128, Used, Both Panels $60 + Shipping, Payment via US Postal Money Order Only! Shipping: US Address Only!
Call Steve 810-629-1097

I have photos of all parts, text 717-four80-3874 or PM me.
67-69 trunk lid stripped and in primer, good condition, no trim holes - $200
69 Dart Owners Manual packet with clear sleeve, includes AC insert card, tire size card, and warranty booklet, VIN of car it came from is written on the cover - $25
A body rear defroster blower motor assembly, unknown if it works, surface rust all over, but all there - $50
8 Dodge Division 14" full hubcaps, could make a decent set out of all 4, $50 for all, will not splitup

BRAND NEW Carter AVS solenoid bracket - retails for $70 - sell for $50.00

USED - 23" hood pin cable set: pins, 23" lanyards and new screws (no gaskets) - ****SOLD****

BRAND NEW - large MC cover - cad plated in color - ****SOLD****


Prices don't include the ride - located in NW Indiana

PM here

*** SOLD *** NOS 1972 Plymouth Duster tail light lenses, passenger & driver, P/N 3587376 & P/N 3587377, new in boxes, $500 + shipping 23703

1969-70 Dart GT quarter panel emblem, 2901895, broken between dart & GT but usable, good mounting studs. $35 + shipping 23703

1973 Duster steering column for PS and auto on column with ignition key. Wiring harness VGC, $150 + shipping 23703

jduster340@verizon.net or PM DusterW2 Prefer US postal money order

Gary Donovan Oakdale CT 06370

1975 Dodge Grill with some bezels $75
\
1975 Dodge Dart from clip a/c car, very nice $250 cut from dash/a pillars so includes cowl.

CARBURETOR Carter AVS 4639, 1969 340 automatic,$625.00 Plus postage. Contact DAN at724 858 6662 or PM

used,homemade 1967-1972 340 a-body drivers side motor mount bracket, made from a 318 ds mount, with a homemade solid motor mount, adjust it to fit. may have to drill thru 1 hole,i never used this$25
cowgerwilliam035@gmail.com

1968 A body 83/4 rear ,all wheel studs good,.. has never been apart, or welded on, I don't know if it is a sure-grip or not , tag says 3.23 gears, no sure-tag. 741 case from a Virginia car not all pitted, give MOPARTS people a chance to buy it or trade before i restore it,......... $500 firm zip 26264 ********TRADE FOR A RUNNING 440 SHORT BLOCK ********** thanks moparts !!

Rear Bumper for 1966 Dart

Nice condition Good Core for rechrome

$150.00 FREE Delivery to Mopar Nats in Columbus

One NOS 75-6 VALIANT, MINT CONDITION, $25, 2 70-74 used VALIANT, $25PR., 2 68-9 VALIANT 100, $25PR. , One used V-8, Like new condition, $25. No Paypal. U.S. money order only. shipping extra.
VEIGHTPETE@GMAIL.COM

These are a pair of Rebuilt 65-72 Kelsey Hayes disc brake calipers that are used on the A body cars, during those years, as optional equipment.

This is the last pair of calipers that i have left for sale.
Good rebuildable cores are just to hard to come by anymore, for me to find and then rebuild.

I just completed the rebuilding of them, and now i am putting them up for sale.
These officially started life as 70 calipers, and you are getting them with all the hard lines on the calipers, and naturally with new rebuilding seal kits, that were required in rebuilding them, and new pistons that were necessary for replacement, and all four of the pad hold down clips.
Also with both hard lines on the calipers, that you don't get if you bought rebuilt calipers that come out of China.
These calipers are pretty much out of stock, at the parts store level, these days, in this modern day and age.

You purchase your own brake pads, of the manufacture of your choosing, as some folks are pretty anal in what brand, pad composition that they like to use, so i left that decision up to you.

Replacement parts costs have gotten very expensive since the last pair of these KH calipers that i rebuilt, last year, for resale purposes.
The hard brake lines are now costing sixty dollars from the selling company, and the kits, pistons, pad clips, have also substantially gone up in price.
These calipers are quite expensive to rebuild, in this modern day and age, sad to say.

I have done all the hard dirty work for you in rebuilding them.
I am now a retired, former full time, auto mechanic, that has all the professional, proper tools, in getting the old, stuck, pistons out of their bores.
Shop labor rates are $150.00 + dollars an hour where I'm at, and if i charged one half that, it would be a low labor rate.

They have been hand scrubbed clean in the solvent tank, then soaked out in a pail of Evaporust, to bring them back to bare metal condition, then painted up cast iron grey, with a spray can of VHT high heat paint.
And a can of VHT paint is now costing 13 bucks, at the parts stores, in my area.
I need to see $380.00 for these calipers with all the parts that go into them during the rebuild, my labor time in doing them, and the price that i had to pay for them in the beginning, and the kits, pistons, hard lines, paint.

Payment will be by Pay Pal, family or friends, or a good old fashioned USPS money order. And the delivery to you will be by the USPS, with insurance on the package.
I figure i will securely package them up in a USPS large flat rate box, to survive the journey from point A to point B, within the USPS system.

If your a serious buyer, and not a shopper, or tire kicker, send me a message thru this forum and i will give you my e mail address, and or telephone number, if you need to talk with me, with the time that you can contact me.

Jim V.
hemi71x

68 Dart GTS trunk finish panel, very straight with minor, VERY FIXABLE imperfections. The paint needs to be stripped and repainted. I have pics both sides that I can text you as I am having trouble uploading them on here. Sorry, I do not have hardware $425.00 can deliver to Holley MoParty if deposit is prepaid. Thanks for the ad Moparts Tim 317-717-8979

1968 Dart GT trunk finish panel. This is the ARGENT finish with black outlined. Very straight with 2 small imperfections that can be fixed very easily. Paint needs to be stripped and repainted. Has been in attic storage for10 plus years. Sorry I have no hardware. Have pics on phone I can send as I am having trouble uploading them on here. $425.00 can deliver to Holley MoParty if prepaid deposit. Thanks for the ad Moparts Tim 317-717-8979

Trunklid for 1964-66 Barracuda

The lip is good. Dent on edge. Some surface rust on underside panel.
"PLYMOUTH" letters Included

$80.00 - local pick-up

FREE Delivery to the Mopar Nats in Columbus

Sold!!!

Steel frame. Black in color. Bought to dye blue but ended up just buying one that's done cuz dying these is a pain! Excellent condition. Can't deliver to the Mopar Nationals. $350.

1967 barracuda header panel and grills for a driver or nicer , NO head light buckets, good for a #56 year old part, $450 sold as is, obo PM here Thanks moparts !

1967-73 a body 150 speed-o not faded clear, great color, but the trip does not work, the speed-o has been tested and works great, i think it is from a 70-71 340 duster i had #40 years ago, been in dry storage the hole time, i have had alot of parts but only one of these $350 obo PM here Thanks moparts !

Complete set of A-body Seats for 2-door

Front split benchseat w/ center armrest and headrests. Backseat bottom and top cushions.

The seats are from a 1971 Duster and still have the original style model year seatcovers. Even though there are differences from year to year the seat will fit ALL 1968 -76 A-body models.
Local Pick-up or FREE Delivery to the Mopar Nats

$350.00 for the Complete set-up FREE Delivery to the Mopar Nats

These came off a 1965 Valiant.They have been glassbed,tested and they work and painted..Ready to go.$40pr.US Postal money order only.No paypal.Call 603 209 1678

Solid and straight...$20.Keene NH.Call 603 209 1678.