Previous Thread
Next Thread
Print Thread
Page 5 of 5 1 2 3 4 5
Re: A Body - Parts For Sale - 2nd Quarter [Re: moparts] #3143337
05/09/23 08:57 AM
05/09/23 08:57 AM
Joined: May 2017
Posts: 85
Pa
H
Hemihead2 Offline
member
Hemihead2  Offline
member
H

Joined: May 2017
Posts: 85
Pa
1972-73 OEM 340 HP (and 74 360 HP) exhaust manifolds. Appear to be in great shape as per pics. Most likely a matched set referencing castings dates. Heat riser is intact and turns freely. No cracks or chips evident. $400 +shipping from Pa or possible delivery to Chrysler’s at Carlisle with prepayment. DM here with interest. Thank you

IMG_2938.jpeg (832 downloads)
IMG_2939.jpeg (832 downloads)
Last edited by Hemihead2; 05/09/23 09:02 AM.
Re: A Body - Parts For Sale - 2nd Quarter [Re: moparts] #3143428
05/09/23 04:02 PM
05/09/23 04:02 PM
Joined: Jan 2003
Posts: 1,784
Portsmouth, VA
D
DusterW2 Offline
top fuel
DusterW2  Offline
top fuel
D

Joined: Jan 2003
Posts: 1,784
Portsmouth, VA
1969-70 Dart GT quarter panel emblem, 2901895, broken between dart & GT but usable, good mounting studs. $35 + shipping 23703.

1973 Duster steering column for PS and auto on column with ignition key. Wiring harness VGC, $150 + shipping 23703



jduster340@verizon.net or PM DusterW2 Prefer US Postal Money Order

IMG_0072.JPG (805 downloads)
20160807_145502.jpg (806 downloads)
Re: A Body - Parts For Sale - 2nd Quarter [Re: moparts] #3143873
05/11/23 09:53 AM
05/11/23 09:53 AM
Joined: May 2017
Posts: 85
Pa
H
Hemihead2 Offline
member
Hemihead2  Offline
member
H

Joined: May 2017
Posts: 85
Pa
NOS 1966-72 front/ rear bumperette. Part number- 2533342. Mild shelf wear but overall very presentable. Please check your application as I have found some conflicting info. 125 shipped to CONUS.

IMG_2966.jpeg (729 downloads)
IMG_2967.jpeg (728 downloads)
IMG_2968.jpeg (728 downloads)
1967-68 Interior door vents [Re: moparts] #3144598
05/14/23 07:13 PM
05/14/23 07:13 PM
Joined: Sep 2003
Posts: 5,543
NH USA
L
littleredcoffin Offline
master
littleredcoffin  Offline
master
L

Joined: Sep 2003
Posts: 5,543
NH USA
These are in good shape and coloring is good.No broken studs and they have all the mountung nuts.$40pr.Calls only..^03 209 678.US Postal money order only

DSC08275.JPG (635 downloads)
67-up console floor hump section [Re: moparts] #3144601
05/14/23 07:16 PM
05/14/23 07:16 PM
Joined: Sep 2003
Posts: 5,543
NH USA
L
littleredcoffin Offline
master
littleredcoffin  Offline
master
L

Joined: Sep 2003
Posts: 5,543
NH USA
I cut it out complete with the bar hole $65.Calls only 603 209 1678.US Postal money order only

DSC08321.JPG (632 downloads)
1967 Barracuda gauge set [Re: moparts] #3144603
05/14/23 07:19 PM
05/14/23 07:19 PM
Joined: Sep 2003
Posts: 5,543
NH USA
L
littleredcoffin Offline
master
littleredcoffin  Offline
master
L

Joined: Sep 2003
Posts: 5,543
NH USA
1967 Barracuda gauge set.Coloring on the gauge faces is nice.Faces are not rusty.Pins on the circuit boards are all there.$85.Calls only.603 209 1678.US Postal money order only

DSC08314.JPG (633 downloads)
Dart Parts [Re: moparts] #3146745
05/25/23 08:43 AM
05/25/23 08:43 AM
Joined: Oct 2005
Posts: 90
Central Vermont
D
DUSTERB'D Offline
member
DUSTERB'D  Offline
member
D

Joined: Oct 2005
Posts: 90
Central Vermont
Mostly '68 and '69 parts, asking $750 for ALL or best offer 802-345-5529

37450.jpg (386 downloads)
37451.jpg (386 downloads)
37452.jpg (386 downloads)
37453.jpg (386 downloads)
Re: Dart Parts cont. [Re: DUSTERB'D] #3146746
05/25/23 08:45 AM
05/25/23 08:45 AM
Joined: Oct 2005
Posts: 90
Central Vermont
D
DUSTERB'D Offline
member
DUSTERB'D  Offline
member
D

Joined: Oct 2005
Posts: 90
Central Vermont
4 pics per ad limit

Last edited by tboomer; 05/25/23 09:03 AM. Reason: 4 pics per ad
Heater box Resistor [Re: DUSTERB'D] #3146799
05/25/23 01:29 PM
05/25/23 01:29 PM
Joined: Oct 2013
Posts: 152
North Carolina USA
S
smuggler Offline
member
smuggler  Offline
member
S

Joined: Oct 2013
Posts: 152
North Carolina USA
#2837805 A/C Heater Box Resistor--Correct for 68-71/73-76 A body, 70-74 E and B body. Good shape and hard to find. $130. If interested, contact 68hemi426@gmail.com. thanks

IMG_2674(1).jpg (361 downloads)
IMG_2675.jpg (361 downloads)
IMG_2676.jpg (361 downloads)
Re: A Body - Parts For Sale - 2nd Quarter [Re: moparts] #3146846
05/25/23 08:59 PM
05/25/23 08:59 PM
Joined: Jan 2003
Posts: 1,784
Portsmouth, VA
D
DusterW2 Offline
top fuel
DusterW2  Offline
top fuel
D

Joined: Jan 2003
Posts: 1,784
Portsmouth, VA
NOS 1972 Plymouth Duster tail light lenses, passenger & driver, P/N 3587376 & P/N 3587377, new in boxes, $500 + shipping 23703

jduster340@verizon.net or PM DusterW2 Prefer US Postal Money Order

IMG_5158A.jpg (396 downloads)
Re: A Body - Parts For Sale - 2nd Quarter [Re: DusterW2] #3146916
05/26/23 12:53 PM
05/26/23 12:53 PM
Joined: Mar 2003
Posts: 1,426
N.W. INDIANA
moparjohn Offline
pro stock
moparjohn  Offline
pro stock

Joined: Mar 2003
Posts: 1,426
N.W. INDIANA
NOS Outer door handles part numbers 3548036 and 3548037.
My research shows these fit 1971 1972 1973 1974 A Body Mopars.
This is a matched pair with the mounting studs and flange nuts included.
These have been stored indoors and do not have the original boxes.
The price is $199.99 for the pair plus shipping.
If you are interested contact me at: jnborzych@gamil.com with your zip.
Thanks!

IMG_0990.JPG (449 downloads)
IMG_0991.JPG (448 downloads)
IMG_0992.JPG (450 downloads)
Re: A Body - Parts For Sale - 2nd Quarter [Re: moparjohn] #3147366
05/29/23 09:00 AM
05/29/23 09:00 AM
Joined: Jan 2003
Posts: 11,798
APACHE JUNCTION AZ
J
Joesixpack Offline
I Live Here
Joesixpack  Offline
I Live Here
J

Joined: Jan 2003
Posts: 11,798
APACHE JUNCTION AZ
NOS#3671076 PCV VALVE, WITH A PENTASTAR, FITS 1972-1973-1974-1975 A-BODY 225-318-340-360$20 EACH
cowgerwilliam035@gmail.com

3671076 004.JPG (352 downloads)
**REBUILT** Kelsey Hayes Disc Brakes 65-72 A Body [Re: moparts] #3148323
06/02/23 09:57 PM
06/02/23 09:57 PM
Joined: Jan 2003
Posts: 5,328
Rancho Cordova, California (Sa...
hemi71x Offline
master
hemi71x  Offline
master

Joined: Jan 2003
Posts: 5,328
Rancho Cordova, California (Sa...

What i have here is a complete, rebuilt Kelsey Hayes 4 piston, disc brake set up that is used on the 1965-72 A body Mopar cars, such as Duster, Dart, Demon, Valiant, and the 65-69 1st and 2nd generation early Barracuda's. It is my understanding that these Kelsey Hayes disc brakes were a dealer installed option starting on the 1965 Barracuda Formula S cars, then became a assembly line option sometime in 1965, and used in 66, 67, 68, 69, 70, 71, 72.

I recently purchased this used brake system as rebuildable cores, from a member on another forum, for me to rebuild, and then put up for sale, to be put back into use, all over again.
It's been very hard to find parts like this anymore, in this day and age.

These are the 4 inch, small bolt pattern brakes, so you don't have to ask me that question.
That's what all the early A body cars were, disc, or drum, brakes.

This brake set up officially started it's life on a 1971 or 1972 car, as all the lug nut studs are for right hand threads.

I have spent a lot of time finding this equipment, or taking the time to bust this stuff off a car out in the field, if anything can be found, cleaning everything up, rebuilding the calipers, and finding and buying all the rebuilding parts.

This is what i do as a retired professional auto mechanic, on my own time, to keep me busy, and have something to do, during the day. I rebuild disc brake components, upper, and lower control arms for these old Mopar cars. Shop labor rates where I'm at are $150.00 + dollars an hour. If i charged you one half that rate it still would be low. I don't work for free, or go to the grocery store, or gas station, or pay my rent, without working to pay the bills. If you factor in what it took me to firstly buy these parts, cleaning them up, doing all the rebuilding, buying the new parts. You try it and see what rotors, brake pads and hoses, rebuild kits, pistons in the calipers, caliper hard lines, bearings, races, seals, and everything else, will cost you. I have already done all the hard, dirty work for you. I can guarantee you, if you purchased someone's parts for $400.00 or more you will be into them for lots of money that i have just described.

OK, Here's what you are getting with this set up. This set up required lots of parts for me to bring everything back to life.
New Rotors.
Caliper Rebuilding Kits
5 New Caliper Pistons. The others are in excellent shape, and did not require replacing.
1 hard line on a caliper required replacement.
1 Bearing & Race.
Both Brake Flex line Hoses from the calipers to the body of the car.
Raybestos D-11 brake pads from the good old days, 1975, when parts were of good quality.
4 new lug studs on one of the rotors.

All but one of the bolts are 100% all original with the proper machining style to them.
Gravel shields, Spindles, with all the necessary mounting bolts are all there.
What you will need to purchase at your local parts store is your own DISC Brake master cylinder for this set up, whether you buy a new one, or rebuilt one, is up to you. It will depend on if you plan on using these parts for power disc brakes, or just manual brake.
And a disc brake proportioning valve.
A good used one can be found, and or repop ones are available from some aftermarket vendors.
Or, adjustable aftermarket ones are another option.
Also you need to purchase new DISC brake lower ball joints if your car needs them as disc brake ball joints attach to the spindles using 9/16 inch bolts where drum brake car ball joints used 1/2 inch diameter mounting bolts. Or have a machine shop drill your existing Drum brake ball joints, out to 9/16, if they already are in good shape.

>>>>> Now please read this about all the fine print about these parts.<<<<<<

I expect that you know how to work on brake systems on your car if you purchase all these parts from me. You need to know how to install brakes, bleed brakes, maybe bend and flare a brake line or two, and know what the heck you are doing on a changeover such as this. You must have a working mechanical knowledge, knowing what your doing.These parts are being sold as is, even though they are rebuilt components. After all, these things are 50 + year old parts.

Once they leave here they are your's. No returns. I haven't had any complaints from my internet clients,that i sold rebuilt upper, and lower control arms, and various other style calipers for the old Mopars, and all the other brake set up's that i have sold to my customers. Everyone has been a happy camper.

>>>>>Now please read this about shipping and my handling charges.<<<<<

Since all these parts are very heavy, this is what i will do on packaging everything up, and sending them out to the buyer.
The cheapest, and probably the best way for me to do this, is thru the USPS in their large priority flat rate mail boxes, using four of them.
I will do this for $125.00 anywhere in the continental USA.
That will include insurance on each of the packages, and signature delivery when your mailman, knocks on your door.
I want to send to residences where somebody will be home when your mailman drops by, on his or her delivery route.
No, porch pirates, or thieves, on your street following the mailman's truck around.

Selling everything at $900.00 plus the shipping to your zip code.
That's my price, no "offers" "trades for other parts" or services.
Send me an e mail pm message thru this forum, for any other information, questions.

Payment will be the good old fashioned way, by postal money orders, or a cashiers check from your bank, or i guess i could accept Pay Pal payment, friends or family.
Your choice, whatever you want to do. I will leave that up to you.

You have questions, need to talk, do it with me in a private message on this forum, and i can give you my e mail address, phone number, for personal conversation.

Thank's a lot.
Jim V.
hemi71x

Last edited by hemi71x; 06/02/23 10:08 PM.

RF-4C Phantom 69-370 Zweibrucken, Germany

Side mirror [Re: moparts] #3149193
06/06/23 07:09 PM
06/06/23 07:09 PM
Joined: Aug 2014
Posts: 590
Wisconsin
71duster414 Offline
mopar
71duster414  Offline
mopar

Joined: Aug 2014
Posts: 590
Wisconsin
NOS passenger side mirror with mounting hardware and instructions.

$300 plus Shipping


hoffmanhhr@gmail.com
Page 5 of 5 1 2 3 4 5






Powered by UBB.threads™ PHP Forum Software 7.7.1