Mopar 53032456AE Bell Crank, this is the part needed to convert manual gas pedal to drive by wire and maintain kick down functionality needed for the 904/727/518 transmissions behind a 3G Hemi.
Fully tested and functional, includes the wiring harness, $125 includes shipping to US
Also have just the sensors for $100, if you don't need the housing.
Genuine Mercedes / Mopar part only available on 2003-2004 5.7 Ram pickups

Here’s a link on how to set-up:

https://www.youtube.com/watch?v=5H6Jt6G5DcA&t=197s&ab_channel=DIYHEMI

These were sold through the Performance Division of Chrysler
(Performance Division part numbers start with a P)

P5248255 Lighter (both sides shown) 30.00 (have 13)
P5248253 Stopwatch (the battery is dead) 2 screws on back to open it 38.00 (have 14)
P5248262 Key Ring (White background/Indy 500 logo) 35.00 (have 4)
P5248260 Pinback or Lapel Pin /clear plastic over the picture) 15.00 (have 2)
P4791840 Gold Key Ring (rectangular) with Viper pictured 35.00 (have 2)
P4791834 Gold Key Ring with snakehead and the word Viper 35.00 (have 2)

www.arizonaparts.com

mkolner14@hotmail.com

480-966-6683

N.O.S.
Original factory REQ Radio for 2009-2010 Challenger
5064933AD
$240 plus shipping
PM for info

NOS Chrysler 300C Heritage front door mld
O.E. from 2006-2009
Mopar number 4806348AB
$120 plus ship
PM for info

N.O.S
68217334AB coolant lines aka heater hoses
fits 2017 and newer Chrysler Pacifica
$200 plus ship
PM for more info

N.O.S. instrument panel wire harness for 1988 Daytona-Laser G body cars with "electronic cluster"
MOPAR part # 4414433 which was replaced by 4443928
$200 plus shipping
PM for info

TTI Hemi Motor Mounts
I bought two sets for 5.7 swap into my E body 1970 cuda cars
a few years ago 2006 from TTi never did do the second car -

They did work well for me as a good fit using stock rubber motor mounts

$100 obo -

located N.E.of Detroit, Mi

Dodge Viper Original Factory Car cover. This cover has never been used, never removed from the packaging. It was ordered for my 2013 Viper GTS coupe. I'm sure it will fit many other model year Vipers, excluding the large Wing cars. It cost me over $500.00 plus shipping. My car has since been sold, so I have no use for it. I'll accept $350.00 for it. Thanks, Joe sixpakjoe@cox.net

Transmission

Fits 2000-2004 Chrysler 300M, LHS and Concorde with 3.5L V6.

46,000 miles on transmission, includes convertor.

$485. Shipping available for additional cost or local pick up.

This 180 MPH instrument cluster with an 8K tach is from a 2011 Dodge Challenger SRT8 and is in good shape. There are a couple of minor blemishes on the clear plastic lens cover but will buff out ...

$250.00 + Shipping

This leather-wrapped steering wheel is from a 2011 Dodge Challenger SRT8 and is in pretty good shape. A couple of the pushbuttons have some wear from use but the leather is in really nice condition. There are two very, very light impressions on the surface of the wheel from maybe where the driver leaned their hand on it while driving but they are so light ... you really have to look for them. Airbag not included ...

$150.00 + Shipping

PM Me If Interested ...

Thx For The Ad Space, Moparts ...