1964 & 1965 426 HEMI Super Stock exhaust system, brand new reproduction, never been installed on a car $4500.00 (708) 288-2879

This a a set of pn TTI 400SR-218 Abody BB low deck headers and matching exhaust system that came off of a 74 Duster. The whole system has less that 500 street miles, the headers have normal scratching and small dents that occurred during normal installation and removal and the starter area has been wrapped with heat wrap, shipping would be difficult so pick up is preferred. The parts are located just outside of Fort Worth Tx. Price is 850for everything or 650 for the headers if you don’t want the exhaust system. I have a header box to ship the headers (shipping extra). Cash or US postal money order only. Pm me here or email alilblacktruck@ gmail.com

This an Edelbrock Victor 383 pn2886, it is unmodified, all bolt holes are in good shape, no known issues and I have an intake box to ship it in, price is 250 plus shipping, pm me here or email me at alilblacktruck@gmail.com, payment will be cash or US postal order, thanks

I’m selling this engine for an estate sale, some thing’s I know about it some things I don’t know. With that being said here’s what I know: 512 cubic inches, eagle crank and rods, diamond pistons, 530 block, Edelbrock Victor intake, PRW 1.6 aluminum roller rockers, ported stage VI heads, quick fuel 950 carb, msd billet distributor, milodon pan, Bullet hydraulic roller (291/302-612/612), arp main studs, rod bolts and head studs. This engine was professionally assembled and was only removed because the owner bought a 598 B1 engine. This engine has about 10 1/8 mile passes and less that 500 street miles and was running perfect when removed for the B1 engine. It was in a 3300lb 74 street legal Duster, it quickest pass was a 6.48@110 according to his wife (I’m still looking for his run book and other applicable paperwork), if interested please pm me here or email me at alilblacktruck@gmail.com with any questions and I’ll answer them to the best of my knowledge. The engine is located about 30 minutes west of Fort Worth Tx, price is 5000 cash carb to pan, thanks

NOS Old School Direct Connection RB to B distributor adapter $25

CSR water pump for small block Mopar. Has new motor $250. rich1981@optonline.net

1-pair mopar 426 hemi dual plug iron heads,2780559-m,these was rebuilt some time ago,doesnt look like they have bronze guides or been ported.looks to have new valves and triple valve springs.2500.00 obo.pm me here.PRICE REDUCED.2000.00

Set of 8 Oliver H beam rods dimensions are as follows: length 7.100, big end measures 2.325 without the cap torqued, little end .990, all of these measurements with my uncalibrated calipers so your results could possibly vary a few thousands. Three of the rods are marked with a black X from the machine shop and appear to have had a bearing spun in them, I don’t know if they can be repaired or not, price is 500 obo plus actual shipping, I have a rod box and will individually wrap the rods prior to shipping. These parts are part of an estate sale and this is all the info I could find out about them, thanks, pm me here or email me at alilblacktruck@gmail.com payment will be cash or US postal money order only, thanks again

This is a set of 8 Diamond pistons, 990 pins and spiro locks pn#52409, based on visual appearance the pistons appear to have very little use, once again, these are coming from an estate sale, I’m trying to describe things as best as I can, there are no rings with these pistons and they appear almost new. Price is 500 or best offer, I have a piston box to ship them (shipping extra) thanks, any questions just ask and I will try to answer. Pm me here or email alilblacktruck@ gmail.com payment will be cash or US postal money order, thanks again

BBM Hedman Upswept Headers - $500
Super Victor SBM Intake -$375
SBM Cam Shaft- $250

This is an 1150 gas Dominator built by IRD carburetors, I pulled the bowls off and checked everything for cleanliness, it’s clean and ready to use depending on your tuning requirements, the documentation for the carb is in the first pic, this is all I know about the carb, it had maybe 10 passes on it after it was bought and was replaced with a 1250 IRD carb, any questions just ask and I will answer to the best of my ability, this carb is part of an estate sale that I am in charge of, asking 750.00 and it comes with a 4150 to 4500 adapter if you want it, payment needs to be cash or postal money order only, thanks, pm me here or email me at alilblacktruck@gmail.com

New CSR water pump (8 bolt) w/ blue housing this was my new spare that was in my trailer and never used. The blue housing looks like it may have been used on a pump prior this is the way it came from CSR to me years ago as it has black staining on the side that mounts to your CSR 8 bolt brand specific housing (not seen when installed), perhaps CSR does this with a new motor for colored housings? The housing is not scratched and does include a new rubber o-ring gasket. Free USPS shipping and sells only to USA.

$165. Email 768q@comcast.net

I have a pair of Barry Grant 280 fuel pumps that will need seal kits installed, these kits are available on eBay, ect.
They will ship in a USPS priority mail box free and sell only to USA.

$165 for the pair, usps priority mail included. Email 768q@comcast.net