East Coast 1 wire p/n 2009 140. box marked 160 amp. NEW IN BOX

$200 SHIPPED LOWER 48 STATES

604 Predator
Indy maxx water block .250 raised cam
Predator CNC 460 heads
Indy offset dis
Firecore wires
Titanium vales
T&D rockers 1.8 ratio
Callies crank
GRP rods
Diamond pistons
Jesel belt drive
Missle dry sump oil pump
4 vane vacuum pump
Charlies oil pan
Bullet cam
Trend pushrods
Bam lifters
Indy tunnel ram
ATM 1425 carbs
Coated headers
Motor is fresh zero runs
Cam, Lifters, Pushrods, Rings, bearings, Valve Springs, Locks, valve job and rods are new the rest has 150 runs
Call for more info 35,000.00 Firm

937-538-8027
Scott

Electronic tach drive distributor aluminum housing, excellent shape. $200.

Posting for a friend..

Here is a couple of carbs that I want to sell The Edelblock is new in the box never been put on a car the Holley dominator was put on a ford but was too much carb so I traded one of my Holleys of it been in the box ever since I will take $350 for the Edelbrock I will take $600 for the Holley Dominator Checking the numbers because the numbers show 750cfm but may flow 1050 cfm by the numbers.

My email is the best way ( vernonjudy@yahoo.com  ) If you call my home phone number ( 706 675 3217  ) and if I don't answer they must leave a message  of what they want and a return phone number

Legit OEM 340 (and 360)A body motor mounts and brackets originally off my H code 340 demon. Solid biscuts included.These are not 318 mounts. Went to a hemi. $270 shipped postal money order. lower 48. Pm me here

Weldon A-600A Fuel Pump, Lighty used on fair weather street car. 300 + shipping, prefer Pay Pal for payment or local pick up for cash. Located in the Kansas City area. If add is up it is for sale.
Link to Weldon:
https://www.weldonracing.com/store/A600-A-p53630158

Have a new 850cfm Holley Ultra XP Carb. Part number 80804-1. Ran for about 1/2 hour and am changing directions. $900 obo. Buyer is responsible for shipping and any other fees associated with the sale. Moparpiff@gmail.com is where I can be reached or you can text at 309 781-3020.

Good used pair of front shocks. Competition engineering 3 way adjustment, came off of b- body. $80 shipped

Spal 16" Pusher fan
Part #
VA16-AP70/LL-86S
55$ + shipping, Pay Pal or cash for local pickup.
If add is up it is still for sale.

PowerBond Pro Race Damper PB1112SS - SFI Certified, neutral balance. Purchased for a project and never used, new in box. $220 SHIPPED to the lower 48.

Fresh from CP Carrillo. 6.00", uses .927 pins and 2.100 crank journal. These rods retail for a small fortune ($4000+) and 6-8 month wait. Perfect for short deck (9.0-9.2"). We decide to go titanium rods in the new W8 build. Asking $2500 shipped

Custom flat top Diamond pistons set of 8 for 13 degree W8 W9 heads 4.185 bore, set of 8 .927 H-13 DLC coated pins (cost $100 ea pin), .043,.043, 3mm ring grooves. Fresh skirt coating from Swain. Gas ported, hard anodized. Very little use (12 dyno pulls) before coating Asking $1000 shipped. Have fresh CP Carrillo 6.00" rods to match these pistons ($2500 set)

just rebuilt 650 double pumper
$100.00
pm,email garycastagna@gmail.com, call 401-787-1180