604 Predator
Indy maxx water block .250 raised cam
Predator CNC 460 heads
Indy offset dis
Firecore wires
Titanium vales
T&D rockers 1.8 ratio
Callies crank
GRP rods
Diamond pistons
Jesel belt drive
Missle dry sump oil pump
4 vane vacuum pump
Charlies oil pan
Bullet cam
Trend pushrods
Bam lifters
Indy tunnel ram
ATM 1425 carbs
Coated headers
Motor is fresh zero runs
Cam, Lifters, Pushrods, Rings, bearings, Valve Springs, Locks, valve job and rods are new the rest has 150 runs
Call for more info
$35'000.00 Firm

937-538-8027
Scott

Low deck (best I can tell) Holley street dominator intake with all badging and part numbers removed. Bought this way years ago and don't need it. It is an inch narrower at the intake flanges than a 440 intake.
$200 shipped East of the Mississippi and $225 west of. Postal money order or personal check. Ship when clear.
Shipped from NC 27526.pm with a phone or email for pics apparently.

I have a new full set of 16 Mopar Performance solid flat tappet lifters. New old stock.
The lifters are coated from Mopar with a protective coating to prevent rust. I sprayed some oil on them and wiped them off. Some of the coating is still on there as you can see in the pictures. Most of the lifters are coated on the bottom side with a black coating. A few do not have the black coating.

Price is $195 shipped in the lower 48 states. I ship sell internationally for the additional shipping cost.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

$15 each, Have a bunch
Mopar Big Block 383, 400, 426, 440 Distributor Bracket.
Stock , Shipping 48 states Free,
PayPal , Venmo or Cash app

Tom tommoparts@gmail.com

New in the box, Sealed Power 2355 Six Pack style pistons for a .030 440 engine. I bought these for my GTX but found the engine needed to go .060 These are from a 6-7 years ago, if that matters. $375 plus shipping.

fas141@comcast.net

****SOLD SOLD ************ 68-69 black wrinkle air cleaner and stud only used #50 miles, excellent condition, 125.00 + shipping PM here

PowerBond Pro Race Damper PB1112SS - SFI Certified, neutral balance. Purchased for a project and never used, new in box. $220 SHIPPED to the lower 48.

1968-69 valve covers for a plymouth roadrunner with a new heater bracket, , nice condition, for a southern car no dent's went to MP valve cover $175 PM here

Milodon "road race" oil pan and 3/8" pick up. Was mounted on an engine for one purpose, then engine was sold for use in a pickup truck, so oil pan was changed. $500 bucks for all of it, plus actual shipping. I can meet in the Chicagoland area if you like. S/F....Ken M

Saginaw power steering pump and cooler off a 1970 GTX. Correct for B/E-Body with 383/440/440-6 w/performance axle package. Nice unrestored original core with Nov 1969 date codes (cooler date 17 Nov; pump reservoir date 29 Nov). $425 plus shipping from MD.

PM or email: musclesigns AT Comcast DOT net

Thanks for the ad!