Hardened rocker shafts for BB - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Hardened rocker shafts for BB

Print Thread

Hardened rocker shafts for BB #3078951 09/20/22 07:16 AM 09/20/22 07:16 AM
Joined: Jan 2003 Posts: 6,388 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,388 Abilene, Texas	I need several sets of hardened rockers shafts for some customers. I will be using them on isky iron rockers so I would prefer them to have the grooves like TA rockers have. Anyone know of a supplier for those?

Re: Hardened rocker shafts for BB [Re: fastmark] #3078979 09/20/22 10:22 AM 09/20/22 10:22 AM
Joined: Jun 2019 Posts: 744 Almost Heaven B Bob Stinson super stock
Bob Stinson super stock B Joined: Jun 2019 Posts: 744 Almost Heaven	Hughes? https://www.hughesengines.com/Index...amp;search=rocker+shaft&partid=10393 69 road runner A12 ex-racer 71 Duster w/ a 400 Shiny paint causes stress.

Re: Hardened rocker shafts for BB [Re: fastmark] #3079086 09/20/22 04:54 PM 09/20/22 04:54 PM
Joined: Jan 2008 Posts: 1,211 Minn S SportF pro stock
SportF pro stock S Joined: Jan 2008 Posts: 1,211 Minn	Stanke Motorsports https://stankemotorsports.com/index.cfm He makes them in house, and supplies a lot of engine builders

Re: Hardened rocker shafts for BB [Re: SportF] #3079213 09/21/22 06:46 AM 09/21/22 06:46 AM
Joined: Jan 2003 Posts: 6,388 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,388 Abilene, Texas	Sounds like what I need guys thanks.

Re: Hardened rocker shafts for BB [Re: fastmark] #3079359 09/21/22 04:39 PM 09/21/22 04:39 PM
Joined: Nov 2003 Posts: 1,362 Out of the State of Confusion blue_stocker pro stock
blue_stocker pro stock Joined: Nov 2003 Posts: 1,362 Out of the State of Confusion	You might try Gary Patrick at RAS/RAU... http://www.rockerarms.com/ I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them. Thomas Jefferson Freedom must be repurchased by every new generation General Daniel Jones, WW2 Tuskegee Airmen

Re: Hardened rocker shafts for BB [Re: fastmark] #3079385 09/21/22 06:24 PM 09/21/22 06:24 PM
Joined: Oct 2007 Posts: 4,206 New York polyspheric master
polyspheric master Joined: Oct 2007 Posts: 4,206 New York	When you assemble the rockers on the engine, make sure none of the grooves locates between a rocker and a stand: oil pressure leak. Boffin Emeritus

Re: Hardened rocker shafts for BB [Re: blue_stocker] #3079493 09/22/22 05:18 AM 09/22/22 05:18 AM
Joined: Jan 2003 Posts: 6,388 Abilene, Texas F fastmark OP master
fastmark OP master F Joined: Jan 2003 Posts: 6,388 Abilene, Texas	Originally Posted by blue_stocker You might try Gary Patrick at RAS/RAU... http://www.rockerarms.com/ Just talked to them at length about rebuilding a set of Isky rockers. He has not made any in awhile from Mopars because he’s too busy and material is hard to find. He recommended Stanke.

Re: Hardened rocker shafts for BB [Re: fastmark] #3079627 09/22/22 01:11 PM 09/22/22 01:11 PM
Joined: Dec 2021 Posts: 1,117 Loudoun County, VA Brad_Haak super stock
Brad_Haak super stock Joined: Dec 2021 Posts: 1,117 Loudoun County, VA	Interesting, but not surprising considering the current state of things. FWIW, my RAS shafts are the nicest shafts I've had; I just keep giving them a touch-up polish and reusing 'em. The only other shafts that look as thick-walled to me are the Harland Sharp shafts. 2021 Challenger 6.4L Scat Pack 1320 100% stock: 1.680, 11.894 at 113.75 (DA 175 ft) weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft) 1973 Challenger 452 ci street/strip [2008] pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1