Aluminum Driveshaft? - Moparts Forums

Register Log In Moparts Forums Unlawfl's Race & Engine Tech Aluminum Driveshaft?

Print Thread

Page 2 of 2

1

2

Re: Aluminum Driveshaft? [Re: Hemi_Joel] #3062631 07/26/22 09:55 AM 07/26/22 09:55 AM
Joined: Oct 2004 Posts: 2,820 Connecticut FurryStump master
FurryStump master Joined: Oct 2004 Posts: 2,820 Connecticut	Over the winter I got an aluminum shaft from PST out of Fl. Took 5 days to get, I had to source a yoke sperately due to supply chain issues. If I got a Strange or Mark Williams yoke they could balance it without it. I went with Mark Williams. The shaft cost $700? 3.5 “ the yoke was not cheap. best of 11.39 at 117 mph 1.60 60’. 68 340 S Barracuda Fastback F.A.S.T [IMG]http://i67.tinypic.com/2mnnnnt.jpg[/IMG]

Re: Aluminum Driveshaft? [Re: FurryStump] #3062651 07/26/22 10:30 AM 07/26/22 10:30 AM
Joined: Nov 2009 Posts: 3,082 St. Paul , Mn. tubtar master
tubtar master Joined: Nov 2009 Posts: 3,082 St. Paul , Mn.	Originally Posted by FurryStump Over the winter I got an aluminum shaft from PST out of Fl. Took 5 days to get, I had to source a yoke sperately due to supply chain issues. If I got a Strange or Mark Williams yoke they could balance it without it. I went with Mark Williams. The shaft cost $700? 3.5 “ the yoke was not cheap. I had Strange make me a moly shaft..........I had to send them the Mark Williams slip yoke for the 904 so they could balance it.

Re: Aluminum Driveshaft? [Re: tubtar] #3062675 07/26/22 11:26 AM 07/26/22 11:26 AM
Joined: Dec 2004 Posts: 2,368 Wheatfield, NY Cuda340 top fuel
Cuda340 top fuel Joined: Dec 2004 Posts: 2,368 Wheatfield, NY	Stay away from Dynotech. The guy is a goof ball and doesn't answer the phone. I had an issue with them. I used this place quality shafts. https://www.actionmachineinc.com/

Re: Aluminum Driveshaft? [Re: Cuda340] #3063157 07/27/22 11:47 PM 07/27/22 11:47 PM
Joined: Jan 2003 Posts: 8,164 Plymouth, MI Blusmbl master
Blusmbl master Joined: Jan 2003 Posts: 8,164 Plymouth, MI	I've had Dynotech make 2 for me, one for my Charger and another last year for the Fury. Both were nice pieces. Have had other friends happy with the Driveshaft Shop and Mark Williams though. '18 Ford Raptor, random motorcycles, 1968 Plymouth Fury III - 11.37 @ 118

Re: Aluminum Driveshaft? [Re: Blusmbl] #3063188 07/28/22 04:56 AM 07/28/22 04:56 AM
Joined: Oct 2005 Posts: 1,646 Ringtown, Pa. Dartsport540 top fuel
Dartsport540 top fuel Joined: Oct 2005 Posts: 1,646 Ringtown, Pa.	Mark Williams, about 15 years ago, still in great shape... 548 cu. in., Bill Mitchell Aluminum Block, CRT 727 auto trans, Alston Chassis. 8.981et at 149.46 mph. 1.204et - 60 foot, So Far....

Re: Aluminum Driveshaft? [Re: Dartsport540] #3063194 07/28/22 07:20 AM 07/28/22 07:20 AM
Joined: Jan 2003 Posts: 11,711 Portage,michigan B B3422W5 I Live Here
B3422W5 I Live Here B Joined: Jan 2003 Posts: 11,711 Portage,michigan	269-345-7091 Martin spring and driveshaft here in Kalamazoo. They have done all of my stuff forever, and do all the stuff for local racers in this area. I have had them get stuff done in a single day before. And they high speed balance driveshafts when they make them. 69 Dart GTS A4 Silver All steel, flat factory hood, 3360race weight 418 BPE factory replacement headed stroker, 565 lift solid cam Best so far, 10.40 @127 1/4 1.41 best 60 foot 6.60 at 103.90 1/8

Re: Aluminum Driveshaft? [Re: JERICOGTX] #3063286 07/28/22 01:02 PM 07/28/22 01:02 PM
Joined: Jan 2019 Posts: 16 MI J Jeff440sc member
Jeff440sc member J Joined: Jan 2019 Posts: 16 MI	I had a dynotech aluminum drive shaft years ago and it started to develop a bulge near the front yoke after 20 or more runs so be careful if this shaft is for a drag car with slicks with some decent power. Moly is cheaper and stronger when used with a smaller diameter.

Page 2 of 2

1

2

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1