Re: Exhaust for the 2nd gen Rams
[Re: racerx]
#3062281
07/25/22 04:40 AM
07/25/22 04:40 AM
|
Joined: Sep 2003
Posts: 6,845
Missouri
StrokerPost
master
|
master
Joined: Sep 2003
Posts: 6,845
Missouri
|
My 98 quad cab sport has muffler shop built, not a kit, cat back system using a Magnaflow dual outlet muffler with 2 1/4" aluminized pipes run out the back with stainless tips. Has a really mellow/low tone when cruising, best I've heard on a Dodge for my taste, with a louder tone when I stand on it, I love it!  Are the pipes manual bends? and if so, what did they hit you up for? (As I thought about going that route) The Flowmasters kit that I have on there now fits nicely. But like everything else the price has gone up a couple hundred dollars for the kit. And then on top of that I not a fan of the black tips I prefer the stainless. Thanks for the response:  I believe you are asking if it has mandrel bends, if so then no they are not, and as this is a stock 360 I was not concerned about that. I believe at the time I paid $250 for the whole works.
|
|
|
Re: Exhaust for the 2nd gen Rams
[Re: StrokerPost]
#3062302
07/25/22 07:22 AM
07/25/22 07:22 AM
|
Joined: Aug 2008
Posts: 3,996
Mo.
racerx
OP
master
|
OP
master
Joined: Aug 2008
Posts: 3,996
Mo.
|
My 98 quad cab sport has muffler shop built, not a kit, cat back system using a Magnaflow dual outlet muffler with 2 1/4" aluminized pipes run out the back with stainless tips. Has a really mellow/low tone when cruising, best I've heard on a Dodge for my taste, with a louder tone when I stand on it, I love it! Are the pipes manual bends? and if so, what did they hit you up for? (As I thought about going that route) The Flowmasters kit that I have on there now fits nicely. But like everything else the price has gone up a couple hundred dollars for the kit. And then on top of that I not a fan of the black tips I prefer the stainless. Thanks for the response: I believe you are asking if it has mandrel bends, if so then no they are not, and as this is a stock 360 I was not concerned about that. I believe at the time I paid $250 for the whole works. Thanks and you are correct meant to say mandrel bends.
|
|
|
|
|
Installed a Cat Back on a Reg cab , 8 ft bed , 4X4 , 1998 5.9 . Used a DynoMax System , must have been made out of some grade Stainless , was on the truck for 20 Years . NO problems , NO rust . 
Sold the Truck to a buddy , and System is STILL on it today . Can't vouch if they are built the same today . 
Ronnie