Looking for a 4x4 crew cab 72-85 thank you

I'm lookin for a first gen 4x4 Durango with a 5.2 or 5.9 engine that is rust free and in good condition. Preferably, it would have spent most or all of its life in a state that doesn't treat the roads with salt in the winter. I may also consider a Dakota if I can't find a Durango. Please let me know what you have. Thanks!

Looking for engine harnesses for 1972, 1974, and 1975 dodge trucks (like D100) . Must be complete with no ends cut off… don’t care if a plastic connector is missing a tab or burnt etc.
thanks

looking for A/C bracketry for the aluminum style compressor (Sanden I think? NOT the York style) to fit a /6. Prefer ones for vehicle without smog pump mount provisions, but will take what I can get.
Adding "factory" A/C to 85 D150 w/a /6.
Also need the A/C dash control head, with the vacuum line harness included.
Also interested in louvered dash vents that go in the middle position and the far right side. (I have a "factory A/C" Dash already but missing the vents)

Im looking for 1992 - 1996 Dakota NOS parts. Not used or repops. Many looking for a grill, and headlight bezels in chrome. But if you have other stuff let me know.
Thank you, Bill

wgp 1977 x at yahoo . com

Looking for the cast iron portion of the front driveshaft u-joint assembly to fit a 78 Powerwagon, pm me here, thanks

Still looking for a stock 8 3/4 rear to fit a 74 half ton 2wd pick up…anything out there in the Texas, Oklahoma, Louisiana, Arkansas , New Mexico area? Pm me here, thanks

Searching for a Crewcab cab and doors or the whole body (long bed) 1972-1985



Parts below needed for 1987 W150 shortbed if that matters

Also searching for "fuel filler neck cup" that bolts to the filler neck and the bed
Dash bezel screws (6)
Map light and screws
Tan glove box door
Tailgate
Driver's door


More to come I'm sure

Looking for driver power-lock actuator motor to fit Dodge Ram 86-91. Last known part# 4467251

Please Email Me: crazydart400 AT yahoo Dot com , Located Albany NY

WTB AAR Fiberglass challenger R/T style hood for a 1992 dodge truck. Message me here if you have one you would like to sell. Thanks

Looking for the Lower steering column / Fuse box cover for my 1985 Ram.

Red in color and been told that 1981-1992 are the same but, I'm not sure on this.

PM me here on what you have. Found...Thanks
Thanks for ad and help....Bill

I am looking to buy a FACTORY short bed standard cab 72-78 Power Wagon 440/727 (will consider 2wd though). Must be in very good shape and mostly original. I don't want to have to do rust repair and I'm willing to wait to find one in very good original condition (and pay the price for that). I'll consider any color but much prefer the two tone greens, browns, orange/white, and not black or white.

I realize it's a tall order, but will wait and I won't low ball anyone since I'm looking for quality. I'm not in a hurry to find one.

Please PM me. I check often.

1972-1976 lower grille support -with turn signals :-)... Also nice pair of headlight doors (for same)...bbodybill@gmail.com THANKS
D100

Still looking for a stock tach for my 1972 W200. 1972-1974 will work. Thanks!

Local body shop who's doing some work for me has a 92 Dodge Diesel, 1-ton 2 WD, extra heavy duty. Severe duty?

They CANNOT find a front right wheel bearing for it. Advance, Azone, etc. can't find one. I sure they've tried Dodge as well.

Anyone know of or might have a source for it? Thanks ( I may score some points with them ( discount ) if you can help me )

PM me or magnumguy78@gmail.com

Hey there everyone! My name is Mac.
I joined Dodge Talk with the hopes of connecting with other Dodge enthusiasts so that I could gather information about my own vehicle, others projects and see about tracking down parts. I noticed that in the post topics categories, under 1st Gen, that it didn't state anything older than 1988. Therefore I'm making this post under this "Welcome" topic of discussion.
I own a 1972 Dodge D200 3/4 Ton Truck which which came with both the Camper 9000 towing package and the Adventurer SE trim level. The drivetrain is still all original, being a 360 2V motor connected to a 4 speed manual transmission backed to a Dana 60 rear with 4:56 gears. The truck runs well and is currently the basis for my daily driver, however I'm missing some things that I am using this platform to try and find.

The hardest part (which I still haven't come across) is the trim bezel for the clutch pedal. With the Adventurer SE trim package, chrome dress-up was included on the pedals, however every advertisement, listing ad, or stock image on google has always shown me an SE as an automatic. There is a saving grace to this... both the brake and clutch pedal are identical in size, meaning they came with the same size bezel. I just need to find one of the two as I just need the clutch pedal trim bezel. I'll insert a link to another post I had made on another forum "DodgeTalk" that includes images of the interior

[url=https://www.dodgetalk.com/threads/new-to-dodge-talk-hopefully-looking-for-parts-information.662029/][/url]


(Brake, Gas and even E-Brake pedal although not in the image do have their chrome bezel) My passion is all original vehicles as the raw, visceral driving experience is something which cannot be replicated by newer parts or pieces. I have been fortunate enough to find some essential pieces for the truck and try to continue to bring it right back to the day it was born. Here's the current day image of the interior from a different angle. Vehicle Car Motor vehicle Steering part Steering wheel
I have found and installed the original radio (not the same one the truck was born with though), Factory Air Conditioning Switches Housing, correct Mushroom shape shifter knob and even finding the cigarette lighter...if you can believe that! If you know of someone who has either the correct brake pad or clutch pad chrome bezel for a 1972 Dodge D-series truck and would be interested to sell, please reach out to me via this post in the discussion or my email
machal1717@gmail.com

looking for a few 11 inch rear backing plates. if you also have the e-brake levers and the strut that separates the shoes, that would be nice. pm me price and shipping to 62052. i think that 4 backing plates will fit in a usps large flat rate box. tia.

I am looking for a 1988-89 Dodge D150 318 non ac idler pulley bracket for my son.

Looking for the speedometr head for my 85 Ram and P/N on it is 4075324 but, I know other years will work.

The speedometer is the one with the trip meter and has the oil gauge so don't need the one with the oil llight.

If you have a complete set up I would consider it to if the price is wright.

Thanks Moparts for the ad....Bill