Previous Thread
Next Thread
Print Thread
Page 3 of 5 1 2 3 4 5
Holley 4779 750 Double Pumper - Used [Re: 727specialist] #3036566
04/24/22 12:21 PM
04/24/22 12:21 PM
Joined: Feb 2006
Posts: 743
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 743
CT

I have a lightly used Holley 750 with mechanical secondaries, manual choke and 4 corner idle adjustment. This carb was used for some dyno sessions. It is set up with 72 jets in the front & 78 in the rear. Power valve is 4.5 in the front and the rear metering block is plugged. One minor modification was the front throttle blades were drilled for idle air. They were removed, the holes welded shut and reinstalled.

Carb is in excellent shape with little use.

Price is $400 plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

Diamond Flat Top Forged Pistons 4.070 Bore for 4.0” Stroke - [Re: Rocket] #3036567
04/24/22 12:23 PM
04/24/22 12:23 PM
Joined: Feb 2006
Posts: 743
CT
R
Rocket Offline
super stock
Rocket  Offline
super stock
R

Joined: Feb 2006
Posts: 743
CT


For sale is a used set of 8 Diamond forged flat top pistons and pins for a 4.070 bore block and using a 4.000” stroke crankshaft. These pistons use a Chevy sized 0.927” wristpin. These were used in a street-strip engine for a few summers.

Bore (in.) 4.070 in.
Stroke 4.000 in.
Rod Length 6.125 in.
Piston Material Forged aluminum
Compression Height (in.) 1.457 in.
Piston Head Volume (cc) +5.60cc
Wrist Pin Style Floating
Pin Diameter (in.) 0.927 in.
Piston Ring Thickness 1/16 in. x 1/16 in. x 3/16 in.

Price is $400 plus shipping.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

P1060925.JPG (3551 downloads)
P1060926.JPG (3546 downloads)
P1060927.JPG (3546 downloads)
P1060928.JPG (3541 downloads)
Six Pack braided hose kit [Re: Rocket] #3036602
04/24/22 01:44 PM
04/24/22 01:44 PM
Joined: Dec 2004
Posts: 1,060
Ill
S
SMILINJOE Offline
super stock
SMILINJOE  Offline
super stock
S

Joined: Dec 2004
Posts: 1,060
Ill
New purchased from ProMax Carbs. Was $250
Goes from fuel pump to carbs includes pressure gauge and filter.
$195 shipped lower 48

image.jpg (3520 downloads)
Last edited by SMILINJOE; 04/24/22 01:46 PM.
Re: Diamond Flat Top Forged Pistons 4.070 Bore for 4.0” Stroke - [Re: Rocket] #3037482
04/27/22 01:40 AM
04/27/22 01:40 AM
Joined: Apr 2018
Posts: 140
San Diego
J
JP8 Offline
member
JP8  Offline
member
J

Joined: Apr 2018
Posts: 140
San Diego
For Sale. New in the box Scat 2-350-6125-2100A
https://www.summitracing.com/parts/sca-6612521a

$500
They retail for $695 so you're saving $200.

I bought these for a 3.79" crank build. Plans were to use a Molnar crankshaft. Molnar also has a 4.00" crank that these would work with.
These are NOT Chrysler spec rods. These are "Chevy" rods that are to be used with certain aftermarket Chrysler crankshafts ( https://www.molnartechnologies.com/domestic-crank-shafts/ )

They would also work for @Rocket 's pistons just above this post.

I will ship these for a flat rate of $25 to the lower 48. I will accept cash, check, money order, cashier's check, PayPal (Friends and Family), ...

This weekend (4/30 - 5/01) I can deliver anywhere near an interstate in SoCal, AZ, NM, West TX, or OK as I am driving from San Diego to OKC.


Instagram : @5_points_racing
Drag slick inner tube [Re: JP8] #3038017
04/28/22 05:50 PM
04/28/22 05:50 PM
Joined: Jan 2003
Posts: 17,907
So Near, Yet So Far
topside Offline
I Live Here
topside  Offline
I Live Here

Joined: Jan 2003
Posts: 17,907
So Near, Yet So Far
New in box Firestone D5025 inner tube. Valve stem TR218NRB (the large metal one).
Bought for my 13x31x15s as a spare.
Size also fits 10.5/28.5 through 30.5, 11.5/28.5 through 29.5W.
Half the cost new @ $40, add for shipping (I'll find cheapest way).

PM me here or email topside340@yahoo.com, especially May 5-14 when I'm out of town.

64 Dodge b body fiberglass [Re: topside] #3038808
05/01/22 04:04 PM
05/01/22 04:04 PM
Joined: Jul 2003
Posts: 660
New Jersey
D
Dartforforty Offline
mopar
Dartforforty  Offline
mopar
D

Joined: Jul 2003
Posts: 660
New Jersey
1964 Dodge b body fiberglass body parts. All parts are new. Only the fenders were mounted for fitment.
Front fenders $400.00 each
Front bumper $200.00
Deck lid $250.00
Doors $200.00 Each
Dash board $300.00
I do not know the manufacturer, no labels. Purchased with a project.
Fenders have some mounting holes drilled, everything else was never mounted to a car.
Some nicks and chips from handling and moving. Pick up only in Central New Jersey, I will not ship as it can and will get damaged by the shipper.
PM me through the board for more details
Ed

Last edited by Dartforforty; 05/14/22 04:51 AM.
Re: 64 Dodge b body fiberglass [Re: Dartforforty] #3039735
05/04/22 04:38 PM
05/04/22 04:38 PM
Joined: Jul 2012
Posts: 416
Washington
skrews Offline
mopar
skrews  Offline
mopar

Joined: Jul 2012
Posts: 416
Washington
SOLD

RCI Platinum 5 Point Harness Expired
All hardware included, very little use.
$30 shipped in lower 48
PayPal or USPS money order
PM me on the board

l1S4IcU.jpg (2569 downloads)
Last edited by skrews; 05/04/22 09:41 PM.
Muscle Motors oil pump cover. [Re: skrews] #3040081
05/05/22 08:22 PM
05/05/22 08:22 PM
Joined: Nov 2003
Posts: 1,701
NW Indiana
F
fbs63 Offline
top fuel
fbs63  Offline
top fuel
F

Joined: Nov 2003
Posts: 1,701
NW Indiana
Muscle Motors Oil Pump cover for external oil pickup.
New, never on an engine.
$150. PM me here.
SOLD !

20220505_120159_resized.jpg (2417 downloads)
20220505_120210_resized.jpg (2416 downloads)
Last edited by fbs63; 05/07/22 07:49 PM.
Milodon dual line swinging pickup. [Re: fbs63] #3040082
05/05/22 08:25 PM
05/05/22 08:25 PM
Joined: Nov 2003
Posts: 1,701
NW Indiana
F
fbs63 Offline
top fuel
fbs63  Offline
top fuel
F

Joined: Nov 2003
Posts: 1,701
NW Indiana
Milodon Dual Line swinging oil pickup.
New. $100 PM me here.

20220505_120229_resized.jpg (3130 downloads)
20220505_120238_resized.jpg (3126 downloads)
20220505_120246_resized.jpg (3124 downloads)
Re: For Sale - Race Parts - 2nd Quarter [Re: Hot 340] #3040613
05/07/22 05:09 PM
05/07/22 05:09 PM
Joined: Feb 2005
Posts: 19,071
PA.
pittsburghracer Online work
"Little"John
pittsburghracer  Online Work
"Little"John

Joined: Feb 2005
Posts: 19,071
PA.
Selling a brand new set of Molnar Chevy rods as I ended up going with a Mopar piston pin size. These would work great in and Chevy sized Mopar small block stroker engine and have been hard to get. Part number CH6125NLB8-A
600.00 plus shipping from 35 miles NE of Pittsburgh Pa

Also selling a very clean Holley Dominator carb. (Gas) List number 9377-2 (1150). I had two of these that have been sitting for years on my shelf. I sent one out last year to have it converted to alcohol. Probably could use new gaskets and go racing. My pictures end up sideways on this site so email me at jacadamore@gmail.com for pictures.
600.00 plus shipping from 16229 in Pa.




Sold. Sold. Sold. Sold. Sold. Sold

Last edited by pittsburghracer; 06/24/22 07:03 PM.

1970 Duster
Edelbrock headed 408
6.143@110.85 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: For Sale - Race Parts - 2nd Quarter [Re: moparts] #3041954
05/13/22 09:40 AM
05/13/22 09:40 AM
Joined: Aug 2003
Posts: 15,337
oak park, il.
D
dsd70bee Offline
I Live Here
dsd70bee  Offline
I Live Here
D

Joined: Aug 2003
Posts: 15,337
oak park, il.
1968 426 HEMI Super Stock 727 torqueflite transmission for LO HEMI Darts & BO HEMI Barracudas $4500.00 (708) 288-2879

parts 12-19-2021 005.JPG (2713 downloads)
parts 12-19-2021 018.JPG (2711 downloads)
parts 12-19-2021 008.JPG (2714 downloads)
parts 12-19-2021 001.JPG (2715 downloads)
Big block Meziere water pump [Re: dsd70bee] #3042312
05/14/22 04:50 PM
05/14/22 04:50 PM
Joined: Dec 2003
Posts: 579
Boise Idaho
6
65coronet500 Offline
mopar
65coronet500  Offline
mopar
6

Joined: Dec 2003
Posts: 579
Boise Idaho
SOLD SOLD SOLD have a Meziere electric water pump for a big block Mopar
Ran briefly for 1 season works fine changed combo don’t need it anymore works good
$ 350 obo plus shipping USA only
Thanks Matt pm me here
I do take pay pal

Last edited by 65coronet500; 05/17/22 11:53 PM.

All steel 3800 lbs with me in it 65 Coronet 451 CID Indy 440-1 heads by Dwayne Porter racing heads .
..... 10.31 @ 129.4 mph 1.40 60 ft ALL MOTOR!!!!
adapter and spacer [Re: 65coronet500] #3042646
05/15/22 10:39 PM
05/15/22 10:39 PM
Joined: Jan 2021
Posts: 258
delhi,il
T
trw1982 Online content
enthusiast
trw1982  Online Content
enthusiast
T

Joined: Jan 2021
Posts: 258
delhi,il
2 inch 4 hole spacer-25.00 shipped tp lower 48. 4150 to 4500 adapter 75.00shipped to lower 48. pm me here.
SALE PENDING ON 2 INCH 4 HOLE SPACER.

20220515_133046.jpg (2418 downloads)
Last edited by trw1982; 05/16/22 07:42 AM.
Re: For Sale - Race Parts - 2nd Quarter [Re: dsd70bee] #3042884
05/16/22 06:48 PM
05/16/22 06:48 PM
Joined: Feb 2005
Posts: 19,071
PA.
pittsburghracer Online work
"Little"John
pittsburghracer  Online Work
"Little"John

Joined: Feb 2005
Posts: 19,071
PA.
Two bare powerglide case. One with
the bell cut off for Ultrabell use and
one modified (cut out) so a Mopar
starter would fit and then modified for
strength. 80.00 each and will not ship.
Keystone Raceway Park pickup
available.
Also selling a new set of .055 over 440
Mopar pistons for a stroker build using
a 4.250 crank. I ended up using .030
over pistons. These are from
440source and sell for 650.00. I'm
asking 525.00 plus shipping. Also have
rings available for above pistons that I
will include for 75.00 more (600.00
total plus shipping).

Pm or jacadamore@gmail.com.
For pictures.


1970 Duster
Edelbrock headed 408
6.143@110.85 mph
9.73@135.05 mph shifting at 6700 RPM
422 Indy headed small block
5.982@112.56 mph
9.42@138.27

Livin and lovin life one day at a time




Re: For Sale - Race Parts - 2nd Quarter [Re: pittsburghracer] #3043190
05/17/22 10:25 PM
05/17/22 10:25 PM
Joined: Feb 2003
Posts: 324
nj pine beach
D
dart9ss Offline
enthusiast
dart9ss  Offline
enthusiast
D

Joined: Feb 2003
Posts: 324
nj pine beach
foe sale Motive gear big pinion 4: 29 :1 ford 9 inch rear with bearing installed on pinion. like new maybe 40 passes, switched to 4:86 ratio , asking $265-00 plus shipping! Holley gen 3 number 80906 1150 carb like new switched to 1250 asking $750.00 or best offer. plus shipping! email dart10ss@aol.com or P M me.

IMG_0384 (1).jpg (2138 downloads)
IMG_0385 (1).jpg (2139 downloads)
IMG_0380.jpg (2141 downloads)
IMG_0382.jpg (2138 downloads)
Last edited by dart9ss; 05/30/22 09:51 PM.
Re: For Sale - Race Parts - 2nd Quarter [Re: dart9ss] #3043396
05/18/22 07:54 PM
05/18/22 07:54 PM
Joined: Feb 2003
Posts: 324
nj pine beach
D
dart9ss Offline
enthusiast
dart9ss  Offline
enthusiast
D

Joined: Feb 2003
Posts: 324
nj pine beach
cleaning out selling my older 8896 holly 1050 Dominator this carb was worked by Dwayne and later Dons carbs. works great , ran 9.00s with 529 cu in air fuel was always good ! asking $525 or B.O P M or email dart10ss@aol.com
Thanks for add moparts!

IMG_0844.jpg (1996 downloads)
IMG_0843.jpg (1996 downloads)
IMG_0842.jpg (1301 downloads)
Last edited by dart9ss; 05/26/22 07:32 PM.
Re: For Sale - Race Parts - 2nd Quarter [Re: Chief] #3044403
05/22/22 07:17 PM
05/22/22 07:17 PM
Joined: Jan 2003
Posts: 439
Seaside,Ca.
T
TC67CUDA Offline
mopar
TC67CUDA  Offline
mopar
T

Joined: Jan 2003
Posts: 439
Seaside,Ca.
Posting for a friend
Big Block Mopar B-1 CFE Engineering Sheetmetal Dual Dominator Tunnel Ram Manifold for Low Deck Block
$2400.00 obo
Call Bob 831-239-3566

IMG_2875a.JPG (1696 downloads)
IMG_2878a.JPG (1698 downloads)
Re: For Sale - Race Parts - 2nd Quarter [Re: moparts] #3044499
05/23/22 06:29 AM
05/23/22 06:29 AM
Joined: Jan 2003
Posts: 3,840
Smyrna, South Carolina
STEFF Offline
master
STEFF  Offline
master

Joined: Jan 2003
Posts: 3,840
Smyrna, South Carolina
Pro Glass 1/8" Formed Lexan Door Windows and Innovative Racecraft Window Frames for Plymouth Duster, Dodge Demon, All BRAND NEW!! $600 plus the ride

PM or Email me: srrimay@gmail.com

Last edited by STEFF; 05/23/22 06:29 AM.
Re: For Sale - Race Parts - 2nd Quarter [Re: moparts] #3045212
05/25/22 07:51 PM
05/25/22 07:51 PM
Joined: Nov 2003
Posts: 351
Fairfield, CA
B
B1mopar Offline
enthusiast
B1mopar  Offline
enthusiast
B

Joined: Nov 2003
Posts: 351
Fairfield, CA
Posting for a good friend of mine Brand New NRC predator heads fits hemi block heads,rockers,valve cover,header flanges and intake $6.500 obo call Ed at 510-928-3242 for more info


MOPAR OR NO CAR!
TRICK FLOW 240 HEADS & INTAKE [Re: B1mopar] #3045608
05/27/22 11:59 AM
05/27/22 11:59 AM
Joined: Jun 2006
Posts: 5,084
CT
GTX MATT Offline
master
GTX MATT  Offline
master

Joined: Jun 2006
Posts: 5,084
CT
Selling a brand new set of TFS TFS-61617802-C00 heads - these are the Power Port 240s with the 1.55 springs and standard retainers (138 lb on the seat, 420 lb/in spring rate). I bought these for a project that changed directions. Still in TFS boxes and bags, were opened for inspection but never bolted on. $2500 OBO for the pair plus shipping. SALE PENDING ON THE HEADS

Also selling a new in box Track Heat Intake, same deal opened for inspection but never bolted on. $450 OBO plus shipping.




Last edited by GTX MATT; 06/01/22 10:11 AM.

Now I need to pin those needles, got to feel that heat
Hear my motor screamin while I'm tearin up the street
Page 3 of 5 1 2 3 4 5






Powered by UBB.threads™ PHP Forum Software 7.7.1