SHAKER BASE PLATE STUDS - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer SHAKER BASE PLATE STUDS

Print Thread

SHAKER BASE PLATE STUDS #3023993 03/14/22 03:50 PM 03/14/22 03:50 PM
Joined: May 2005 Posts: 446 california S sbcjd OP mopar
sbcjd OP mopar S Joined: May 2005 Posts: 446 california	Does anyone sell or reproduce the studs for shaker base plate? Thank you for any information.

Re: SHAKER BASE PLATE STUDS [Re: sbcjd] #3024014 03/14/22 05:44 PM 03/14/22 05:44 PM
Joined: Dec 2013 Posts: 4,669 Wichita G GY3 master
GY3 master G Joined: Dec 2013 Posts: 4,669 Wichita	Member Dayclona (Mike) posted this a few years back: "If you have access to McMaster Carr, meaning you need a business account to purchase,...McMaster has "weld studs", steel, PN# 93865A235 this should spec out for the Shaker application, the weld head is just under 5/8" in diameter, .083 thick, 1/4"-20 thread 1" long, pkg of 100, $14.58" Last edited by GY3; 03/14/22 05:50 PM. '63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.

Re: SHAKER BASE PLATE STUDS [Re: GY3] #3024019 03/14/22 06:03 PM 03/14/22 06:03 PM
Joined: Jan 2003 Posts: 4,783 Ontario, Canada mccannix master
mccannix master Joined: Jan 2003 Posts: 4,783 Ontario, Canada	I think he probably wants the early ones the factory used shown on the left with the 5 over S B markings.

Re: SHAKER BASE PLATE STUDS [Re: mccannix] #3024023 03/14/22 06:30 PM 03/14/22 06:30 PM
Joined: May 2005 Posts: 446 california S sbcjd OP mopar
sbcjd OP mopar S Joined: May 2005 Posts: 446 california	Well, I do not have a business account with McMaster so I cannot buy from them. It would be nice to find some originals as pictured from Terry but I have never seen those advertised for sale. You go to Ebay and it seems just about every bolt has been reproduced but no shaker studs. Is there some alternative stud that can be used? Thank you.

Re: SHAKER BASE PLATE STUDS [Re: sbcjd] #3024031 03/14/22 07:07 PM 03/14/22 07:07 PM
Joined: Jan 2003 Posts: 4,783 Ontario, Canada mccannix master
mccannix master Joined: Jan 2003 Posts: 4,783 Ontario, Canada	If you dont mind scrounging around, Chrysler used these on lots of other applications. 26 inch B and C-body radiator straps....bottom bracket on some window applications, and E-body window part. Many other applications as well where I have seen them, just have to remember where. Tough part is separating them from the metal

Re: SHAKER BASE PLATE STUDS [Re: sbcjd] #3024081 03/14/22 11:15 PM 03/14/22 11:15 PM
Joined: Dec 2007 Posts: 18,157 Mass DAYCLONA I Live Here
DAYCLONA I Live Here Joined: Dec 2007 Posts: 18,157 Mass	Originally Posted by sbcjd Well, I do not have a business account with McMaster so I cannot buy from them. It would be nice to find some originals as pictured from Terry but I have never seen those advertised for sale. You go to Ebay and it seems just about every bolt has been reproduced but no shaker studs. Is there some alternative stud that can be used? Thank you. Years back, you needed to have a business account in order to purchase thru McMaster Carr, not so anymore, you can open your own account or purchase/pay directly, no minimum purchase either, McMaster Carr has quite a large inventory, also offer assistance in finding items they don't offer, most items ship within 1-3 days unless noted on your order...Mike G Last edited by DAYCLONA; 03/14/22 11:18 PM.

Re: SHAKER BASE PLATE STUDS [Re: DAYCLONA] #3024170 03/15/22 11:30 AM 03/15/22 11:30 AM
Joined: Sep 2003 Posts: 19,355 north of coder moparx "Butt Crack Bob"
moparx "Butt Crack Bob" Joined: Sep 2003 Posts: 19,355 north of coder	what would one use to weld these studs similar to factory mounting ?

Re: SHAKER BASE PLATE STUDS [Re: moparx] #3024194 03/15/22 12:37 PM 03/15/22 12:37 PM
Joined: Dec 2007 Posts: 18,157 Mass DAYCLONA I Live Here
DAYCLONA I Live Here Joined: Dec 2007 Posts: 18,157 Mass	Originally Posted by moparx what would one use to weld these studs similar to factory mounting ? There in lies the problem for most restorers wanting factory spot welded studs, they don't have the 3 phase powered water cooled automotive resistance spot frame welder and assorted electrode adapter ends needed.....

Re: SHAKER BASE PLATE STUDS [Re: sbcjd] #3024218 03/15/22 01:49 PM 03/15/22 01:49 PM
Joined: Oct 2003 Posts: 1,175 Woodbridge T Tommy The Chryco super stock
Tommy The Chryco super stock T Joined: Oct 2003 Posts: 1,175 Woodbridge	I have some if you need them. Not with the numbers just what are on the repro parts. Fight the Good Fight- Elastomeric Bumpers and The Better "Shaker kits"

Re: SHAKER BASE PLATE STUDS [Re: Tommy The Chryco] #3024420 03/15/22 10:45 PM 03/15/22 10:45 PM
Joined: May 2006 Posts: 1,754 Phila P PhillyRag top fuel
PhillyRag top fuel P Joined: May 2006 Posts: 1,754 Phila	Without a special holding fixture, any attempt to spot weld them on would disrupt (i.e. mar) the critical surface markings. I'd imagine a fixture could be rigged up by a shop, but for only a few welds not worth it to them. Possibly braze them on. Then stamp on the markings

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1