Chrome Plater in MI or Ohio for 7 1/2 ft tubing - Moparts Forums

Register Log In Moparts Forums Stu Harmon General Forum Chrome Plater in MI or Ohio for 7 1/2 ft tubing

Print Thread

Chrome Plater in MI or Ohio for 7 1/2 ft tubing #3019441 02/27/22 03:26 PM 02/27/22 03:26 PM
Joined: Feb 2005 Posts: 957 MI, Lapeer M maximus OP super stock
maximus OP super stock M Joined: Feb 2005 Posts: 957 MI, Lapeer	Any chrome platers in Michigan or Ohio that can handle a 1 inch diameter by 7 ft 4 inch long steering rod for dragster. All places I called in Michigan cannot handle the length. I heard someone in Ohio can. Anyone know which company it may be. Thanks

Re: Chrome Plater in MI or Ohio for 7 1/2 ft tubing [Re: maximus] #3019446 02/27/22 04:05 PM 02/27/22 04:05 PM
Joined: Jan 2003 Posts: 30,994 Oregon A AndyF I Win
AndyF I Win A Joined: Jan 2003 Posts: 30,994 Oregon	Typically not a good idea to chrome plate steering or suspension parts unless they can be baked. Doubt you are going to find anyone who has that big of an oven. You might want to consider powder coating or painting.

Re: Chrome Plater in MI or Ohio for 7 1/2 ft tubing [Re: AndyF] #3019518 02/27/22 08:59 PM 02/27/22 08:59 PM
Joined: Jan 2003 Posts: 15,304 Omaha Ne T TJP I Live Here
TJP I Live Here T Joined: Jan 2003 Posts: 15,304 Omaha Ne	Originally Posted by AndyF Typically not a good idea to chrome plate steering or suspension parts unless they can be baked. Doubt you are going to find anyone who has that big of an oven. You might want to consider powder coating or painting. Great suggestion IMO. Depending on the usage IE actual comp or just show maybe an appropriately sized Aluminum or SS would be a substitute, There may be some aluminum based power coats that can be polished as well, might also check with the "spray on Chrome" suppliers and see if anybody is near you. www.tandmautomotive-omaha.com

Re: Chrome Plater in MI or Ohio for 7 1/2 ft tubing [Re: maximus] #3019525 02/27/22 09:27 PM 02/27/22 09:27 PM
Joined: Jan 2003 Posts: 21,498 N.E. OHIO, USA A12 Too Many Posts
A12 Too Many Posts Joined: Jan 2003 Posts: 21,498 N.E. OHIO, USA	Jon Wright's Custom Chrome Plating in Grafton, Ohio.............expensive but the best from what I've heard CCP’s tanks are large enough to plate bumpers, and we can accommodate some parts longer than 8 feet. We do not have a hoist line, so weight is restricted to what two workers are able to lift comfortably. https://www.customchromeplating.com/about-us https://www.customchromeplating.com/capabilities

Re: Chrome Plater in MI or Ohio for 7 1/2 ft tubing [Re: A12] #3019531 02/27/22 09:40 PM 02/27/22 09:40 PM
Joined: Apr 2012 Posts: 1,562 Macomb, MI V vinnyd76 pro stock
vinnyd76 pro stock V Joined: Apr 2012 Posts: 1,562 Macomb, MI	Micro Platers 38300 Van Born Rd, Wayne, MI 48184 (734) 722-0421 Ask for Walt

Re: Chrome Plater in MI or Ohio for 7 1/2 ft tubing [Re: maximus] #3019539 02/27/22 10:33 PM 02/27/22 10:33 PM
Joined: Jan 2003 Posts: 8,392 Highland, MI. Sunroofcuda master
Sunroofcuda master Joined: Jan 2003 Posts: 8,392 Highland, MI.	Originally Posted by maximus Any chrome platers in Michigan or Ohio that can handle a 1 inch diameter by 7 ft 4 inch long steering rod for dragster. All places I called in Michigan cannot handle the length. I heard someone in Ohio can. Anyone know which company it may be. Thanks Lebrandi's in PA. has tanks big enough, & they are very good. There are some LONG truck stacks - up to 120" that very few platers can handle. Also Linclon Plating in Lincoln, NEB. Also Advanced Custom Chrome in Erie, PA. (giving you a few trade secrets...) No Man With A Good Car Needs To Be Justified

Re: Chrome Plater in MI or Ohio for 7 1/2 ft tubing [Re: A12] #3020077 03/01/22 08:11 PM 03/01/22 08:11 PM
Joined: Mar 2012 Posts: 344 Ohio B billohio enthusiast
billohio enthusiast B Joined: Mar 2012 Posts: 344 Ohio	Jon Wright did all the chrome on my 300g convertible. Outstanding job. At they time they were booked out a ways.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1