|
|
2010 Drag Pak cold air
#3010453
01/30/22 04:17 AM
01/30/22 04:17 AM
|
Joined: Jan 2003
Posts: 3,943
Melbourne.....Oz-land
Moparmal
OP
master
|
OP
master
Joined: Jan 2003
Posts: 3,943
Melbourne.....Oz-land
|
Hi members
I need a pic of the UNDERSIDE of the hood, of the 2010 NA Drag Pak cold air system.
I have the pics of the cold air base plate (attached), but Iād like to see what it seals to.
67 RO23 clone with 6.1 SRT Hemi and dual quads. Soon to have Drag Pak induction and Throttle body.
|
|
|
Re: 2010 Drag Pak cold air
[Re: Moparmal]
#3010547
01/30/22 02:04 PM
01/30/22 02:04 PM
|
Joined: Dec 2021
Posts: 1,117
Loudoun County, VA
Brad_Haak
super stock
|
super stock
Joined: Dec 2021
Posts: 1,117
Loudoun County, VA
|
I looked everywhere for an under-scoop pic of a Drag Pak hood and couldn't find any. The only thing I can offer is it's got to be pretty much the same as how a '70 T/A hood was configured as shown in the image here: ![[Linked Image]](https://aarqualityfiberglass.com/web/wp-content/uploads/sites/3/2020/03/ChallTA7074U2.jpg)
2021 Challenger 6.4L Scat Pack 1320
100% stock: 1.680, 11.894 at 113.75 (DA 175 ft)
weight reduction, wheels, tires, Hellcat air box: 1.661, 11.686 at 115.97 (DA 710 ft)
1973 Challenger 452 ci street/strip [2008]
pump gas, DOT radials: 1.454, 10.523 at 126.44 (DA 514 ft)
|
|
|
Re: 2010 Drag Pak cold air
[Re: Brad_Haak]
#3011498
02/02/22 11:13 AM
02/02/22 11:13 AM
|
Joined: Dec 2013
Posts: 4,663
Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,663
Wichita
|
Zippy might know. He was involved back in the day but it might have been before that. Might message him.
'63 Dodge 330
11.19 @ 121 mph
Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs.
10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: 2010 Drag Pak cold air
[Re: 340Cuda]
#3012944
02/07/22 01:30 AM
02/07/22 01:30 AM
|
Joined: Jan 2003
Posts: 3,943
Melbourne.....Oz-land
Moparmal
OP
master
|
OP
master
Joined: Jan 2003
Posts: 3,943
Melbourne.....Oz-land
|
You might see if you can contact John Donato at Donato Engineering in Milford MI.
He used to work for Chrysler and can be a source for Drag Pack parts.
I don't have any further contact information, perhaps others do. Thank you!
67 RO23 clone with 6.1 SRT Hemi and dual quads. Soon to have Drag Pak induction and Throttle body.
|
|
|
|
|
|
|
