Changing van rear - Moparts Forums

Register Log In Moparts Forums Sandy's Truck Shop Changing van rear

Print Thread

Changing van rear #3007910 01/22/22 04:09 PM 01/22/22 04:09 PM
Joined: Jan 2004 Posts: 8,233 fredericksburg,va C cudaman1969 OP master
cudaman1969 OP master C Joined: Jan 2004 Posts: 8,233 fredericksburg,va	I have an 01 350 van with floating axel Dana with a lot of miles. Also have a 92 350 van with the non floating 9-1/4 (both 8 lugs) with low miles. My question can I swap the 9-1/4 to my 01? Eyeballed and it looks the same as far as springs and such. Both are abs

Re: Changing van rear [Re: cudaman1969] #3008370 01/23/22 10:33 PM 01/23/22 10:33 PM
Joined: Jan 2003 Posts: 4,587 St. John's Newfoundland 440newport master
440newport master Joined: Jan 2003 Posts: 4,587 St. John's Newfoundland	If they're both van axles it should bolt in fine, but you'll probably need the 9 1/4 driveshaft too. Pretty sure yours will be too short.

Re: Changing van rear [Re: 440newport] #3008390 01/23/22 11:13 PM 01/23/22 11:13 PM
Joined: Jan 2004 Posts: 8,233 fredericksburg,va C cudaman1969 OP master
cudaman1969 OP master C Joined: Jan 2004 Posts: 8,233 fredericksburg,va	Different size u-joints too. But in the process of changing out gears one more time.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1