Previous Thread
Next Thread
Print Thread
Page 2 of 2 1 2
Re: New Small block [Re: fbs63] #3002696
01/06/22 07:35 PM
01/06/22 07:35 PM
Joined: Jan 2003
Posts: 6,130
Melbourne , Australia
LA360 Offline
master
LA360  Offline
master

Joined: Jan 2003
Posts: 6,130
Melbourne , Australia
Originally Posted by fbs63
Being developed by M&M Competition Engines. They also make cast tunnel ram style intakes that fit various platforms. 1spec is the foundry that casts the parts. They are also casting a Gen III Hemi head for MMX. I figured guys would be interested since R blocks are scarce. I almost walked right by at PRI till I noticed the Gen III head. Started looking at the stuff and noticed the block. Would be an interesting combo with a 9.800 deck, stroke and P7 heads. I'm sure they can make a cast manifold.

HardcoreB
I'm to invested in a Gen III Hemi to start over. Everything for my 63 is fabbed for that so no changing direction now. Does peak my interest though. Be a GREAT motor for NA 10.5!


It's cool to see new stuff come out, however the Ritter XR2 is available in 9.6" and 9.2" deck heights and I think I've seen about 2 or 3 builds with one.


Alan Jones
Re: New Small block [Re: LA360] #3002757
01/06/22 11:00 PM
01/06/22 11:00 PM
Joined: Dec 2005
Posts: 11,408
Fulton County, PA
C
CMcAllister Offline
Mr. Helpful
CMcAllister  Offline
Mr. Helpful
C

Joined: Dec 2005
Posts: 11,408
Fulton County, PA
Ritters can be built for P7 heads. I believe the guys local to me have that one figured out.


If the results don't match the theory, change the theory.
Re: New Small block [Re: LA360] #3002811
01/07/22 09:27 AM
01/07/22 09:27 AM
Joined: May 2019
Posts: 161
W. Pa
U
usp4u Offline
member
usp4u  Offline
member
U

Joined: May 2019
Posts: 161
W. Pa
Originally Posted by LA360
Originally Posted by fbs63
Being developed by M&M Competition Engines. They also make cast tunnel ram style intakes that fit various platforms. 1spec is the foundry that casts the parts. They are also casting a Gen III Hemi head for MMX. I figured guys would be interested since R blocks are scarce. I almost walked right by at PRI till I noticed the Gen III head. Started looking at the stuff and noticed the block. Would be an interesting combo with a 9.800 deck, stroke and P7 heads. I'm sure they can make a cast manifold.

HardcoreB
I'm to invested in a Gen III Hemi to start over. Everything for my 63 is fabbed for that so no changing direction now. Does peak my interest though. Be a GREAT motor for NA 10.5!


It's cool to see new stuff come out, however the Ritter XR2 is available in 9.6" and 9.2" deck heights and I think I've seen about 2 or 3 builds with one.


There has been a dozen or more Ritter builds with the v2.0 block and they are figured out pretty well. Back in May I was at Harshman's shop and there were about 5-6 sitting there awaiting machining.


Last edited by usp4u; 01/07/22 09:27 AM.
Re: New Small block [Re: fbs63] #3002820
01/07/22 10:58 AM
01/07/22 10:58 AM
Joined: Jan 2003
Posts: 4,003
Shelby Twp. Mi
HardcoreB Offline
master
HardcoreB  Offline
master

Joined: Jan 2003
Posts: 4,003
Shelby Twp. Mi
Originally Posted by fbs63
Being developed by M&M Competition Engines. ... Does peak my interest though. Be a GREAT motor for NA 10.5!

Yes definitely has some potential! From what i see, based on the parity of rules structuring, the B1 BBM would be an equal player. Both wind up about the same weight. For 2022, I'm staying in my wheelhouse and just using what i have. Unlikely I'll do any NMCA. But the chatter is local tracks are adopting NMCA rules so, that's the direction I'm headed. pun intended

Re: New Small block [Re: usp4u] #3003669
01/09/22 11:32 PM
01/09/22 11:32 PM
Joined: Jan 2003
Posts: 6,130
Melbourne , Australia
LA360 Offline
master
LA360  Offline
master

Joined: Jan 2003
Posts: 6,130
Melbourne , Australia
Originally Posted by usp4u
Originally Posted by LA360
Originally Posted by fbs63
Being developed by M&M Competition Engines. They also make cast tunnel ram style intakes that fit various platforms. 1spec is the foundry that casts the parts. They are also casting a Gen III Hemi head for MMX. I figured guys would be interested since R blocks are scarce. I almost walked right by at PRI till I noticed the Gen III head. Started looking at the stuff and noticed the block. Would be an interesting combo with a 9.800 deck, stroke and P7 heads. I'm sure they can make a cast manifold.

HardcoreB
I'm to invested in a Gen III Hemi to start over. Everything for my 63 is fabbed for that so no changing direction now. Does peak my interest though. Be a GREAT motor for NA 10.5!


It's cool to see new stuff come out, however the Ritter XR2 is available in 9.6" and 9.2" deck heights and I think I've seen about 2 or 3 builds with one.


There has been a dozen or more Ritter builds with the v2.0 block and they are figured out pretty well. Back in May I was at Harshman's shop and there were about 5-6 sitting there awaiting machining.



Are you talking about the XR1 block for wedge heads? Or the XR2 for P7 heads?


Alan Jones
Page 2 of 2 1 2






Powered by UBB.threads™ PHP Forum Software 7.7.1