Nice shop Pat!

I like those lights. What are they?

Big Ass fan is a nice addition.

Jackshaft door operators as well!

What is the size? Ceiling looks to be 12-14'?

Exterior shot?

Keep us posted on your next project.

-larry

LED 4x2 panel lights, I’ll let you know how they work.
https://www.amazon.com/dp/B0849TG3B3/ref=tsm_1_tp_tc

The shop is 48’x32’ with 13’ ceiling just enough room for the tall two post lift.

Thank You!

Hey Keepat I really can't tell on your both your doors but the lower panels on the left door seem to be bent in the middle. I had the same thing and it's the door bending in the middle when it opens. It will end up tearing the panels open. I didn't have a clue since I use the same jackshaft openers you do. I didn't catch it until I unhooked it and operated it by hand.

The fix is to add struts to door. At less that $25 each I just added them to each panel.

Nice shop Pat!

Color me green with envy.

Pat, I use the Mitsubishi split units in my garage and great room. I spent a little extra and got the H2i hyper heat pump so it would work if weather got super cold. 100% @ 5 and 74% @ -13. Even so they work so much better above 32 and for air. My inside units are the fancy 9K and 18K that work off the 1 outside multi zone 24BTU unit. Is yours multi zone or do you have 2 outside units? Are you using it for heat and air or just air?

These are the units I have. https://skipthewarehouse.com/mitsubishi-mxz3c24nahz2u1-24000-btu-hyper-heat-heat-condenser Great looking garage. Mike

That new shop is awesome!

I use a lot of Sunpro lights, they are awesome. I’ve not used the flat panels yet. I just put up some of their other shop lights this past fall and already bought enough to do the other bay. They really look good.

The power tour with the bullitt duo is off the hook. Mega kudos on that.