|
|
|
Re: TA Trans Kickdown Linkage
[Re: mccannix]
#2974687
10/15/21 03:31 PM
10/15/21 03:31 PM
|
Joined: Jan 2006
Posts: 2,368
White Plains, NY
VCODE
OP
top fuel
|
OP
top fuel
Joined: Jan 2006
Posts: 2,368
White Plains, NY
|
Bob....I may have one....give a couple days to check and I'll pm you back Terry, I do have the one that was on the TA I think it's a repro and is the same length as a NOS one Thanks Bob
Mom & Dad let me buy a brand new 70 Challenger R/T 440 Six-Pack Super Trac Pack when I was 17
(Robert what is a 440 Six-Pack)
|
|
|
Re: TA Trans Kickdown Linkage
[Re: steve70]
#2974688
10/15/21 03:56 PM
10/15/21 03:56 PM
|
Joined: Jan 2010
Posts: 1,442
NW Chicago suburban area
Mopar Mitch
pro stock
|
pro stock
Joined: Jan 2010
Posts: 1,442
NW Chicago suburban area
|
Year One price...$450+... astronomical! Correct shape... but it does give you the required brackets, etc.
Mopar Mitch
"Road racers and autocrossers go in deeper and come out harder!"... and rain never stops us from having fun with our cars... in fact, it makes us better drivers!
Check out MOPAR ACTION MAGAZINE, August 2006 issue for feature article and specs on my autocross T/A!
|
|
|
Re: TA Trans Kickdown Linkage
[Re: Mopar Mitch]
#2974950
10/16/21 12:16 PM
10/16/21 12:16 PM
|
Joined: Jan 2003
Posts: 28,596
Shopping @ HoBo Fright
340SIX
Doc Flappergas's Evil Twin
|
Doc Flappergas's Evil Twin
Joined: Jan 2003
Posts: 28,596
Shopping @ HoBo Fright
|
I guess only sold as a whole kit. I already have the manifold parts just needed the rod and attaching hardwear if not tge same as 4bbl hardware.
Last edited by 340SIX; 10/16/21 12:17 PM.
|
|
|
Re: TA Trans Kickdown Linkage
[Re: 340SIX]
#3001260
01/02/22 07:14 PM
01/02/22 07:14 PM
|
Joined: Jan 2003
Posts: 1,043
Slidell, La.
doctor_mopar
super stock
|
super stock
Joined: Jan 2003
Posts: 1,043
Slidell, La.
|
The stock six pack 340 linkage is for E body and will not fit A body . I used the bracket on the manifold made for a 440 six pack , and redrilled for smallblock six pack . I used a threaded coupling from the hardware store to extend the length of the rod coming up from the bell rank of the 4bbl linkage so it would reach , and then I believe I did a tweak on the length of the 4 bbl linkage to hook it up to the six pack carb . It is easy. If you have a question , let me know , and I can take photos on my car.
------------------------ It doesn't matter what you do.........As long as you look good doing it !
|
|
|
|
|
|
|
