If I wanted to use a 3G in a '71 Duster..... - Moparts Forums

Register Log In Moparts Forums Gen III Hemi Tech If I wanted to use a 3G in a '71 Duster.....

Print Thread

If I wanted to use a 3G in a '71 Duster..... #2959254 08/30/21 10:50 PM 08/30/21 10:50 PM
Joined: Feb 2010 Posts: 18,493 Granite Bay CA Kern Dog OP Striving for excellence
Kern Dog OP Striving for excellence Joined: Feb 2010 Posts: 18,493 Granite Bay CA	.....And wanted to use a carburetor, what are the options for an intake manifold? How about ignition? I'm guessing that motor mounts and headers are commonly available, right? Not right away though. The car needs some work.....

Re: If I wanted to use a 3G in a '71 Duster..... [Re: Kern Dog] #2959290 08/31/21 04:59 AM 08/31/21 04:59 AM
Joined: Dec 2013 Posts: 403 Romulus, MI GTS340 mopar
GTS340 mopar Joined: Dec 2013 Posts: 403 Romulus, MI	Ignition options= MSD Hemi 6, FAST, and Mallory Firestorm if you can find one Intake manifold= OCP, Indy ModMan, Ritter Dragpak style, MP/Edelbrock dual quad, Holley Hi-ram, and the early MP single 4 or XV Motorsports if you can find one

Re: If I wanted to use a 3G in a '71 Duster..... [Re: GTS340] #2959735 08/31/21 10:32 PM 08/31/21 10:32 PM
Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY Dragula I Live Here
Dragula I Live Here Joined: May 2004 Posts: 12,383 Taxes & Virus's R-US, NY	Weber makes carbed intakes, and I forget who makes the distributor based front plates... '70 Cuda,...605 EFI Hemi Street Car (6.20 best pass, 1.33 60ft) https://www.youtube.com/watch?v=WYw6RA-k5Bk (6.25 at 108.75mph from inside car) https://www.youtube.com/watch?v=3zQEb9uxFng (6.25 at 108mph from outside car) https://www.youtube.com/watch?v=JCvfzsC4NgM (9.9) '66 Barracuda AWB Stretched nose Blown 440 Car in build stage '71 Duster Drag Car 400 Low Deck 512 best 6.002 at 115.44mph https://www.youtube.com/watch?v=Znuo3jMUXTk

Re: If I wanted to use a 3G in a '71 Duster..... [Re: Dragula] #2959753 09/01/21 12:01 AM 09/01/21 12:01 AM
Joined: Feb 2010 Posts: 18,493 Granite Bay CA Kern Dog OP Striving for excellence
Kern Dog OP Striving for excellence Joined: Feb 2010 Posts: 18,493 Granite Bay CA	Thanks! I'd need an intake that would clear a stock hood. I remember hearing about the MSD spark controller but didn't know if it was a hybrid distributor or some electronic setup.

Re: If I wanted to use a 3G in a '71 Duster..... [Re: Kern Dog] #2959789 09/01/21 07:07 AM 09/01/21 07:07 AM
Joined: Dec 2016 Posts: 1,111 Usa A A39Coronet super stock
A39Coronet super stock A Joined: Dec 2016 Posts: 1,111 Usa	I read nothing but bad things about that Indy Modman. Let me know if you're interested in the Edelbrock dual 4bbl setup, I have a brand new one in the box I'm not using. This one, along with the OCP unit is likely the only option for fitting under the hood. Last edited by A39Coronet; 09/03/21 07:35 AM. Follow my G3 Hemi Barracuda build on Youtube https://www.youtube.com/watch?v=XSDAWczXoZw&list=PLTus_wQu8POADHEeJNJp2nr4NMHEyB9EK 2015 Tri-State Stock Super Stock Champion 2017 Monster Mopar Pro Winner 2018 Monster Mopar No Box Winner

Re: If I wanted to use a 3G in a '71 Duster..... [Re: GTS340] #2959804 09/01/21 08:31 AM 09/01/21 08:31 AM
Joined: Jan 2012 Posts: 1,541 USA H hudsonhornet7x pro stock
hudsonhornet7x pro stock H Joined: Jan 2012 Posts: 1,541 USA	Originally Posted by GTS340 Ignition options= MSD Hemi 6, FAST, and Mallory Firestorm if you can find one Intake manifold= OCP, Indy ModMan, Ritter Dragpak style, MP/Edelbrock dual quad, Holley Hi-ram, and the early MP single 4 or XV Motorsports if you can find one Never heard of the Mallory Firestorm before. I can't find much info about it. Will it work with the newer 58 tooth reluctor wheel?

Re: If I wanted to use a 3G in a '71 Duster..... [Re: hudsonhornet7x] #2959812 09/01/21 09:06 AM 09/01/21 09:06 AM
Joined: Dec 2013 Posts: 403 Romulus, MI GTS340 mopar
GTS340 mopar Joined: Dec 2013 Posts: 403 Romulus, MI	Originally Posted by hudsonhornet7x Originally Posted by GTS340 Ignition options= MSD Hemi 6, FAST, and Mallory Firestorm if you can find one Intake manifold= OCP, Indy ModMan, Ritter Dragpak style, MP/Edelbrock dual quad, Holley Hi-ram, and the early MP single 4 or XV Motorsports if you can find one Never heard of the Mallory Firestorm before. I can't find much info about it. Will it work with the newer 58 tooth reluctor wheel? No, early wheel only

Re: If I wanted to use a 3G in a '71 Duster..... [Re: GTS340] #2959840 09/01/21 10:06 AM 09/01/21 10:06 AM
Joined: Jan 2012 Posts: 1,541 USA H hudsonhornet7x pro stock
hudsonhornet7x pro stock H Joined: Jan 2012 Posts: 1,541 USA	Thank you

Re: If I wanted to use a 3G in a '71 Duster..... [Re: Dragula] #2960102 09/01/21 08:33 PM 09/01/21 08:33 PM
Joined: Apr 2005 Posts: 229 Augusta, GA Lightning enthusiast
Lightning enthusiast Joined: Apr 2005 Posts: 229 Augusta, GA	Originally Posted by Dragula Weber makes carbed intakes, and I forget who makes the distributor based front plates... Prefix bought Arrow's stuff a couple years or so ago. https://store.prefix.com/products/arr-cas-1010-gen-3-hemi-non-efi-intake-manifold https://store.prefix.com/products/hemi-front-distributor-kit They make both that Nascar/Cascar intake and that front distributor. Wish they were cheaper though.

Re: If I wanted to use a 3G in a '71 Duster..... [Re: Lightning] #2960172 09/01/21 11:48 PM 09/01/21 11:48 PM
Joined: Feb 2010 Posts: 18,493 Granite Bay CA Kern Dog OP Striving for excellence
Kern Dog OP Striving for excellence Joined: Feb 2010 Posts: 18,493 Granite Bay CA	HEMI Gen3 Front Distributor Kit Regular price$1,670.00 This kit allows you to run your Gen3 5.7L / 6.1L HEMI without the need of expensive electronics. ************************************************************************************************************************************************************************* "Without the need of expensive electronics" ?? No, instead you have an expensive adapter to run a distributor!

Re: If I wanted to use a 3G in a '71 Duster..... [Re: Lightning] #2960206 09/02/21 06:14 AM 09/02/21 06:14 AM
Joined: Dec 2016 Posts: 1,111 Usa A A39Coronet super stock
A39Coronet super stock A Joined: Dec 2016 Posts: 1,111 Usa	Originally Posted by Lightning Originally Posted by Dragula Weber makes carbed intakes, and I forget who makes the distributor based front plates... Prefix bought Arrow's stuff a couple years or so ago. https://store.prefix.com/products/arr-cas-1010-gen-3-hemi-non-efi-intake-manifold https://store.prefix.com/products/hemi-front-distributor-kit They make both that Nascar/Cascar intake and that front distributor. Wish they were cheaper though. The distributor kit is pricy but $575 for the intake is not. Very much inline with a lot of quality LS options and for the longest time they were unavailable. Last edited by A39Coronet; 09/02/21 06:15 AM. Follow my G3 Hemi Barracuda build on Youtube https://www.youtube.com/watch?v=XSDAWczXoZw&list=PLTus_wQu8POADHEeJNJp2nr4NMHEyB9EK 2015 Tri-State Stock Super Stock Champion 2017 Monster Mopar Pro Winner 2018 Monster Mopar No Box Winner

Re: If I wanted to use a 3G in a '71 Duster..... [Re: Kern Dog] #2960222 09/02/21 08:26 AM 09/02/21 08:26 AM
Joined: Jan 2003 Posts: 2,041 MD RTSE4ME top fuel
RTSE4ME top fuel Joined: Jan 2003 Posts: 2,041 MD	I think your best choice would be the OCP ($679)intake with the MSD Hemi 6( $870 w/harness). The OCP is 4.9" tall so it should fit under stock hood. The owner is very helpful also. Remember the Hemi6 only works 32 tooth tone ring so if your engine is 09+ you need to swap out tone rings. Forget about the Prefix front distributor it was made to run CASCAR. Depending what you have it might be a wash to go the FI route vs carb,

Re: If I wanted to use a 3G in a '71 Duster..... [Re: RTSE4ME] #2960505 09/03/21 01:17 AM 09/03/21 01:17 AM
Joined: Feb 2010 Posts: 18,493 Granite Bay CA Kern Dog OP Striving for excellence
Kern Dog OP Striving for excellence Joined: Feb 2010 Posts: 18,493 Granite Bay CA	I was thinking that....A stand alone harness to run the EFI and spark may be another route.

Re: If I wanted to use a 3G in a '71 Duster..... [Re: A39Coronet] #2960965 09/04/21 01:18 PM 09/04/21 01:18 PM
Joined: Jan 2005 Posts: 12,415 Kalispell Mt. H HotRodDave I Live Here
HotRodDave I Live Here H Joined: Jan 2005 Posts: 12,415 Kalispell Mt.	Originally Posted by A39Coronet Originally Posted by Lightning Originally Posted by Dragula Weber makes carbed intakes, and I forget who makes the distributor based front plates... Prefix bought Arrow's stuff a couple years or so ago. https://store.prefix.com/products/arr-cas-1010-gen-3-hemi-non-efi-intake-manifold https://store.prefix.com/products/hemi-front-distributor-kit They make both that Nascar/Cascar intake and that front distributor. Wish they were cheaper though. The distributor kit is pricy but $575 for the intake is not. Very much inline with a lot of quality LS options and for the longest time they were unavailable. Got to buy an adapter to put oil in it though I am not causing global warming, I am just trying to hold off a impending Ice Age!

Re: If I wanted to use a 3G in a '71 Duster..... [Re: Kern Dog] #2960979 09/04/21 02:47 PM 09/04/21 02:47 PM
Joined: Feb 2008 Posts: 452 Monrovia, So-Cal, USA racerhog mopar
racerhog mopar Joined: Feb 2008 Posts: 452 Monrovia, So-Cal, USA	I pretty sure you have to go EFI to get it under the hood..... If you haven't already... Check out the Crop Duster build.. >>>>> https://www.motortrend.com/features/gen-iii-hemi-swapped-1970-plymouth-duster/ Bob(Cowboy)Hogan Monrovia So-Cal

Re: If I wanted to use a 3G in a '71 Duster..... [Re: racerhog] #2961129 09/05/21 03:24 AM 09/05/21 03:24 AM
Joined: Feb 2010 Posts: 18,493 Granite Bay CA Kern Dog OP Striving for excellence
Kern Dog OP Striving for excellence Joined: Feb 2010 Posts: 18,493 Granite Bay CA	Thanks. That isn't the "Crop Duster" though.

Re: If I wanted to use a 3G in a '71 Duster..... [Re: HotRodDave] #2961155 09/05/21 08:14 AM 09/05/21 08:14 AM
Joined: Dec 2016 Posts: 1,111 Usa A A39Coronet super stock
A39Coronet super stock A Joined: Dec 2016 Posts: 1,111 Usa	Originally Posted by HotRodDave Originally Posted by A39Coronet Originally Posted by Lightning Originally Posted by Dragula Weber makes carbed intakes, and I forget who makes the distributor based front plates... Prefix bought Arrow's stuff a couple years or so ago. https://store.prefix.com/products/arr-cas-1010-gen-3-hemi-non-efi-intake-manifold https://store.prefix.com/products/hemi-front-distributor-kit They make both that Nascar/Cascar intake and that front distributor. Wish they were cheaper though. The distributor kit is pricy but $575 for the intake is not. Very much inline with a lot of quality LS options and for the longest time they were unavailable. Got to buy an adapter to put oil in it though Negative...pop the plate off and use a funnel... adapter is nice but not required. Follow my G3 Hemi Barracuda build on Youtube https://www.youtube.com/watch?v=XSDAWczXoZw&list=PLTus_wQu8POADHEeJNJp2nr4NMHEyB9EK 2015 Tri-State Stock Super Stock Champion 2017 Monster Mopar Pro Winner 2018 Monster Mopar No Box Winner

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1