Will 315’s Fit ? - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Will 315’s Fit ?

Print Thread

Will 315’s Fit ? #2945232 07/20/21 03:27 PM 07/20/21 03:27 PM
Joined: Jun 2011 Posts: 234 London, England J JFChallenger440 OP enthusiast
JFChallenger440 OP enthusiast J Joined: Jun 2011 Posts: 234 London, England	Some wheels I have I might need to put on my 70 Charger temporarily(long story) Before digging them out and swapping them just wondering people’s opinions on if they would fit ok or will I run into rubbing problems, especially the rear, details are below , many thanks Rears 17 x 10.5 315/35/17 Backspace = 7.25” Offset + 25 Fronts 17 x 8 245/45/17 Backspace = 5” 12 (can’t quite see if it’s a + or - but will measure) Many thanks

Re: Will 315’s Fit ? [Re: JFChallenger440] #2945233 07/20/21 03:30 PM 07/20/21 03:30 PM
Joined: May 2005 Posts: 4,707 Florida BDW master
BDW master Joined: May 2005 Posts: 4,707 Florida	Unless you've moved the springs, no way 7" of backspace will fit.

Re: Will 315’s Fit ? [Re: BDW] #2945243 07/20/21 04:02 PM 07/20/21 04:02 PM
Joined: Oct 2005 Posts: 8,861 Ontario, Canada S Stanton Don't question me!
Stanton Don't question me! S Joined: Oct 2005 Posts: 8,861 Ontario, Canada	5.5" BS or the rears are about the limit with stock tubs.

Re: Will 315’s Fit ? [Re: Stanton] #2945244 07/20/21 04:06 PM 07/20/21 04:06 PM
Joined: Jun 2011 Posts: 234 London, England J JFChallenger440 OP enthusiast
JFChallenger440 OP enthusiast J Joined: Jun 2011 Posts: 234 London, England	Ok many thanks

Re: Will 315’s Fit ? [Re: JFChallenger440] #2949102 07/31/21 11:19 AM 07/31/21 11:19 AM
Joined: Jun 2011 Posts: 234 London, England J JFChallenger440 OP enthusiast
JFChallenger440 OP enthusiast J Joined: Jun 2011 Posts: 234 London, England	Sorry how about this, I also have for the rears a set of 18 x 9.5 with 255/45/18's and 7" backspace, would they work with a 1.25" spacer I have ? Thanks

Re: Will 315’s Fit ? [Re: JFChallenger440] #2949192 07/31/21 04:18 PM 07/31/21 04:18 PM
Joined: May 2005 Posts: 4,707 Florida BDW master
BDW master Joined: May 2005 Posts: 4,707 Florida	Maybe, will you have enough threads left to get a lugnut on with a 1.25" spacer?

Re: Will 315’s Fit ? [Re: BDW] #2949195 07/31/21 04:23 PM 07/31/21 04:23 PM
Joined: Jun 2011 Posts: 234 London, England J JFChallenger440 OP enthusiast
JFChallenger440 OP enthusiast J Joined: Jun 2011 Posts: 234 London, England	Thanks , the spacers are the type that bolt on to the current studs and then they have there own studs already on them that the wheels go on to , similar to this

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1