|
Re: Hughes Engines Tech Center: Aluminum Rockers Kick Stockers
[Re: Rustymuscle]
#2918485
05/04/21 03:20 PM
05/04/21 03:20 PM
|
Joined: Jul 2003
Posts: 3,267 Connecticut
1972CudaV21
master
|
master
Joined: Jul 2003
Posts: 3,267
Connecticut
|
Most folks don’t want to spend the coin. But, if you want quality...👍
China is the enemy.
|
|
|
Re: Hughes Engines Tech Center: Aluminum Rockers Kick Stockers
[Re: 1972CudaV21]
#2918770
05/05/21 09:30 AM
05/05/21 09:30 AM
|
Joined: Dec 2013
Posts: 4,651 Wichita
GY3
master
|
master
Joined: Dec 2013
Posts: 4,651
Wichita
|
"While most will put the stamped steel stockers to shame"
Some performance comparison numbers between stock and aftermarket rockers would be nice.
'63 Dodge 330 11.19 @ 121 mph Pump gas, n/a, through the mufflers on street tires with 3.54's. 3,600 lbs. 10.01 @ 133mph with a 250 shot of nitrous an a splash of race gas. 1.36 60 ft. 3,700 lbs.
|
|
|
Re: Hughes Engines Tech Center: Aluminum Rockers Kick Stockers
[Re: GY3]
#2918793
05/05/21 10:25 AM
05/05/21 10:25 AM
|
Joined: Mar 2006
Posts: 2,726 Nashville, TN
Rustymuscle
OP
Mopar Connection Magazine
|
OP
Mopar Connection Magazine
Joined: Mar 2006
Posts: 2,726
Nashville, TN
|
|
|
|
|
|
|