440. Does anyone have the PS belt running from the pump to the crank only? If so, what is the belt size?

That's how mine is routed, but I don't know the size off hand. I generally use a short piece of rope to get the length before going to the parts store.

I use a dayco topcog 15440 15/32 X 44" on my hemi but it should be the same, I tied several length belts and this keep it from rubbing on fan pulley like 99% of mopars.

Here's a picture of witness marks from old power steering belt on the fan pulley like I've seen on almost every big block Mopar I've every seen. Lol

Mike

Dayco 15435

thanks , I installed a Borgensen Power steering system on my 71 440 Superbee and I have those rub marks exactly like that. Was wondering if I had to change water pump pulleys or something. Still don't like any rubbing but feel a bit better about it now

I just did the same project on my 71 roadruuner with a 440, I'm using a Gates 7425 which is 42.5" . I don't see any evidence of any rubbing.