Hi all: Looking for nice original seatbelts with the white labels still present. Part numbers I need are 2999585, 2999631, 2999 587 and 2999 588. Need in black, blue and green. PM me if you have anything.
Thanks for the ad. Moparts!

I'm looking for 1 or 2 overhead consoles that are in rough shape, but complete. I need pieces for them to put my 2 back together before installing. Let me know what you have. text pics to me at 92 zero, 21 zero, 6 nine 4 six

wanted ac condensor for a 71 e body...part number 3441065...nice used or nos...was also used on 71 Bbody...24 1/4 in. ...thx keith 318-393-1502

Hello,

If you have any damaged/junk 1972 - 1974 ‘Cuda grilles, I’d like to purchase a small section where the hood release is located (see picture). I’m not interested in an entire grille at this time. Just a “chunk” of this size or larger, unbroken.

Wanted:

Pair of the retaining screws for the forward most attachment clips on the 70-71 Challenger SE door top stainless mouldings.

Thanks Moparts for the ad!

TWSchuler@aol.com

Looking for inner roof structure over both doors.

This is for my 1970 barracuda, too tedious to keep fabricating little sections. Haven't removed full roof skin, may need inner structure around front windshield.

I am looking for an NOS driverside rear side marker light bezel, cast number 3403643 for a 1970-71 Cuda, and possibly 2 NOS small red lenses for the lights for the rear side markers.

Please send me a picture and price of what you have.

I have an NOS right rear side marker bezel I could trade if that helps.

Thank you!
Jim

looking for an AAR cuda hood closer to cincinnati the better oem or repop..bolt on only
mcat4321@yahoo.com or PM me here

Looking for a metering rod for a 1971 340 thermoquad carburetor... I will take 2 if you have a pair... Probably the same from a 72 or 73 340 carb... I tried one from a 440 and 400 carb but they were different lengths and steps in the rods...

PM me here or Email tensec318@comcast.net

I am needing a pair of original 1971 Challenger R/T side scoops. Please let me know if anyone can help out.
Thanks, Stevet

Looking for a original set of red lines for a 70 Cuda grille let me know if you have a set or if you have the small one.

looking for a dust shield for a non fresh air baseplate. thanks

Looking for a challenger convertible top frame for my car as most of the convertible top stuff is missing. Also looking for interior a pillar trim and the trim that goes between the sun visors and rear view mirror. Let me know what convertible specific challenger parts you have! Mine is a 70

i need for a E-body bench seat,
the drivers side inner hinge cover.
its shorter then the outside hinge cover,
it faces the folddown armrest

attached are photos of the right side,
i need the opposite

please call 302-398-0821 or
email tonymopar@aol.com

thanks for your help

Looking for front #3461514 or the pair. NOS or good original. Call 301-602 2465

Looking for manual brake master cylinder firewall reinforcement plate
Think I found one thanks

Looking for Challenger clean used interior door panels.. Must not be chauky, no cuts or scratches. Will dye ,so color is not an issue. Call 603 209 1678 thanks

Looking for 2 rear side marker bezels.. The chrome must be pit free. Chrome must be in excellent condition.. I am using new lenses. Also looking for 71 outer passengers side mirror, chrome or painted, does not matter, must not have a lot of pitting, prefer it with a gasket. Looking for A/C controller chrome buttons, just need the bush buttons.. They need to have all their chrome platting and not be peeling, New after market or perfect used ,with like new coloring electric washer bottle, 1 set of New window felts, inner and outer.. Pictures and prices if possible Call 603 209 1678 if you have these, thanks

looking for a set of turn park signal lenses for a 70 cuda grille i have the housings just need the plastic lenses.pm or e-mail tb3cuda@charter.net

I have an OEM set