Hi all, where can one find the large dust shield for a dana 60 pinion yoke....... this is the large metal washer that slips over the pinion yoke to keep dirt from getting to the pinion seal. I've done the research , the (small) type of shield is available just about everywhere but can't seem to find the oem large shield. If anyone knows where I might locate one please let me know where. btw, this is for a NEW one not used

Later, BUZZ

Find a Dana/Spicer dealer in your area. They might be able to help.

Just google DANA 60 REAR PINION YOKE DUST SHIELD they are all over the place.

Thanks for the reply and yes, I agree they ARE all over the place.... but as I mentioned these are the small dust shields looks alot like a steel 'O' - ring . Look at any vendors web site that sells diff. yokes and every picture regardless of yoke size be it, 7260 , 7290 , 1310 , 1330 or 1350 they all show the large flange dust shield. I know some will say just use yours and I would love to but that poor yoke has been through hell and back....... all bent, pitted & rusted.

Later, BUZZ

Why not drive the old one off and reuse it?