15x7 front with 225/70/15
15x8 rear with 255 BFG’s but rubbed. Now have 235/75/15
Factory housing, spring location and tub.

One of the few i have had. I think I'm ready for a keeper this time. This car currently resides in Michigan now Jim races brackets and NMCA NSS some with it.

Here's a couple shots of mine for ya.... 205 70-15s up front and 325 50-15s out back. Springs moved in to frame rails. Stock wheel tubs.
I did "clearance" the inner wheel tub on the back with a little hammering.

Front: 225/70-15 on 7", now 235/60-15 for better fit.
Back: 275/60-15 on 8", stock spring location and tubs.

I ran 245/45-18 in front and 295/45-18 out back on Boyd Coddington Smoothie II wheels.
Factory spring location and stock wheel wells. I clearanced the outer wheel houses inside the quarters with a bit of percussive maintenance.

Buddies 64 Plymouth. I backhalfed it last winter. 14x32 slicks, w/ 14” rims.

what sizes is the back rim

[/url]

[/quote] what sizes is the back rim [/quote]

I'd like to know too....I'm thinking 12" with 6 or 7" backspace

I'm guessing 15 x 12. 29.5 x 10.5w tire and mini-tubs....AL?

it looks good

Sorry forgot to include that info but we have a winner Well kinda no W

I am thinking its time for another one for me. The next one is going to have to be extra nice

This was another one I have had over the years. This one goes WAY back but its a 275/60-15 drag radial

back space ?

back space ? [/quote]

Ya know I don't recall exactly. I wanna say they were 6" but don't quote me on that. Both those cars I had pictured were Dana cars the green one was a stock wheel tub car. Did it in a carport on a military base in 99-2000

My next one Id like to do a post car. As a keeper.

I had a 64 Savoy wagon as well at one point. But never got around to doing much with it. But the new owner killed it with a modern EFI Hemi and OD. Car looks great now Randy did a fantastic job with it.

Thanks. I'm starting to think about selling it. I've had it 40 years but it might be time to downsize a bit. I'd keep it if my kids were interested but they aren't.

whats the hood measurements for the hole in need to cut a hole in mine to

I run a 15x12 wheel with 7"bs on the back of my 65. Ladders bars, no tubs, fits a 29.5x10.5W.

Casey FJ

Do you have a recent pic?

Here’s mine, weird angle with the camera makes grill look funny.

First one in 76