Previous Thread
Next Thread
Print Thread
Blower motor gasket #2868015
01/02/21 11:10 AM
01/02/21 11:10 AM
Joined: Jan 2003
Posts: 6,363
Abilene, Texas
F
fastmark Offline OP
master
fastmark  Offline OP
master
F

Joined: Jan 2003
Posts: 6,363
Abilene, Texas
I’m working on a 69 b body with heater only. The seal/insulator gasket is pretty hard. Does anyone make one of those? I checked DMT and he does not have one. It’s the seal that goes between the blower and fan through the backing plate on the heater.

Last edited by fastmark; 01/02/21 11:11 AM.
Re: Blower motor gasket [Re: fastmark] #2868021
01/02/21 11:18 AM
01/02/21 11:18 AM
Joined: Aug 2009
Posts: 1,314
Ohio
J
jlatessa Online content
pro stock
jlatessa  Online Content
pro stock
J

Joined: Aug 2009
Posts: 1,314
Ohio
Detroit Muscle Technologies, you have to buy the rebuild kit, I think.

Joe

Last edited by jlatessa; 01/02/21 11:19 AM.
Re: Blower motor gasket [Re: fastmark] #2868024
01/02/21 11:21 AM
01/02/21 11:21 AM
Joined: Jan 2003
Posts: 4,109
MD
floyd Offline
master
floyd  Offline
master

Joined: Jan 2003
Posts: 4,109
MD
Check with Jim at DMT anyway. If he doesn’t have he he may make one for you using your original as a pattern. I think he’s always looking for new products to offer anyway.

Re: Blower motor gasket [Re: fastmark] #2868027
01/02/21 11:31 AM
01/02/21 11:31 AM
Joined: Jan 2003
Posts: 18,389
UPPER MICHIGAN, MARQUETTE COUN...
N
NITROUSN Offline
I Live Here
NITROUSN  Offline
I Live Here
N

Joined: Jan 2003
Posts: 18,389
UPPER MICHIGAN, MARQUETTE COUN...
Originally Posted by fastmark
I’m working on a 69 b body with heater only. The seal/insulator gasket is pretty hard. Does anyone make one of those? I checked DMT and he does not have one. It’s the seal that goes between the blower and fan through the backing plate on the heater.


I may have one. Post a picture.

Re: Blower motor gasket [Re: NITROUSN] #2868113
01/02/21 02:46 PM
01/02/21 02:46 PM
Joined: Jan 2003
Posts: 6,363
Abilene, Texas
F
fastmark Offline OP
master
fastmark  Offline OP
master
F

Joined: Jan 2003
Posts: 6,363
Abilene, Texas
Here you go.

1E61FF0D-DD71-4335-8EB5-0112CFF8CA9B.jpeg
Re: Blower motor gasket [Re: fastmark] #2868216
01/02/21 08:10 PM
01/02/21 08:10 PM
Joined: Jan 2003
Posts: 18,389
UPPER MICHIGAN, MARQUETTE COUN...
N
NITROUSN Offline
I Live Here
NITROUSN  Offline
I Live Here
N

Joined: Jan 2003
Posts: 18,389
UPPER MICHIGAN, MARQUETTE COUN...
So it is just a round foam gasket. I believe I have it. Just give me the OD and ID and I will measure mine.

Re: Blower motor gasket [Re: NITROUSN] #2868238
01/02/21 08:53 PM
01/02/21 08:53 PM
Joined: Jan 2003
Posts: 6,363
Abilene, Texas
F
fastmark Offline OP
master
fastmark  Offline OP
master
F

Joined: Jan 2003
Posts: 6,363
Abilene, Texas
It’s not a round foam gasket. It’s made of rubber and has a raised part around the studs of the motor that goes through that metal back support of the rear of the box. Those raised portions collapse to help insulate from the vibrations of the fan. It has a part number molded into it.

Re: Blower motor gasket [Re: fastmark] #2868286
01/02/21 10:29 PM
01/02/21 10:29 PM
Joined: Jan 2003
Posts: 18,389
UPPER MICHIGAN, MARQUETTE COUN...
N
NITROUSN Offline
I Live Here
NITROUSN  Offline
I Live Here
N

Joined: Jan 2003
Posts: 18,389
UPPER MICHIGAN, MARQUETTE COUN...
sorry that I do not have.

Re: Blower motor gasket [Re: NITROUSN] #2868435
01/03/21 12:28 PM
01/03/21 12:28 PM
Joined: Oct 2005
Posts: 8,828
Ontario, Canada
S
Stanton Offline
Don't question me!
Stanton  Offline
Don't question me!
S

Joined: Oct 2005
Posts: 8,828
Ontario, Canada
Quote
Detroit Muscle Technologies, you have to buy the rebuild kit, I think.


Not part of the kit nor is it available from them.







Powered by UBB.threads™ PHP Forum Software 7.7.1