Previous Thread
Next Thread
Print Thread
80 RR F-Body oil pan question #2853439
11/30/20 03:23 PM
11/30/20 03:23 PM
Joined: Feb 2006
Posts: 1,053
Tennessee
7
727builder Offline OP
super stock
727builder  Offline OP
super stock
7

Joined: Feb 2006
Posts: 1,053
Tennessee
Building a friend a LA 360 for his 1980 road runner.
I have a #438 pan from a c-body, Will it work in his car and clear k-member and steering linkage?

If not? Anyone know what part number 360 oil pan will fit in it?

Thanks!

Re: 80 RR F-Body oil pan question [Re: 727builder] #2853461
11/30/20 04:18 PM
11/30/20 04:18 PM
Joined: May 2019
Posts: 2,036
nowhere
S
Sniper Offline
top fuel
Sniper  Offline
top fuel
S

Joined: May 2019
Posts: 2,036
nowhere
Put a 79 360 in my 87 M body, used whatever was stock for a 79 Cordoba (donor car) to do it.

Cleared just fine. No idea what the number was though.

Re: 80 RR F-Body oil pan question [Re: Sniper] #2853825
12/01/20 02:00 PM
12/01/20 02:00 PM
Joined: Jun 2005
Posts: 4,864
Western Md.
skicker Offline
Son of Doc Fiberglass
skicker  Offline
Son of Doc Fiberglass

Joined: Jun 2005
Posts: 4,864
Western Md.
You should be fine with the C Body pan...

I only know of 1 car and 1 truck pan for a 360... shruggy


...FAFO...
Re: 80 RR F-Body oil pan question [Re: 727builder] #2857897
12/09/20 10:45 PM
12/09/20 10:45 PM
Joined: Feb 2006
Posts: 1,053
Tennessee
7
727builder Offline OP
super stock
727builder  Offline OP
super stock
7

Joined: Feb 2006
Posts: 1,053
Tennessee
Thanks guys..
From what I've read they are 3 car 360 oil pans, 392 is suppose to be the correct for the F-body I'm working on. Their is also a 876 pan not sure what it fits. And this 438 pan from the 71-73 C-body. I went ahead and bolted to to a bare block and set it down in there to make sure it'll fits and clears everything before I bolt it up to the rebuilt 360. It fits fine! 👍👍







Powered by UBB.threads™ PHP Forum Software 7.7.1