Hello folks, been years since I’ve been on here. Some old timers may remember a write up I did on Dakota spindles to lower a d100.
I am in the process of this again but have a question for guys that stayed in the loop with this.
I remember hearing that Belltech changed the design of the 91-96 Dakota spindle and there was interference with the steering and brake rotor. I used the cheap chassis tech spindles 15 years ago with no problems. The Belltech spindles are actually cheaper than the Airbagit spindles. I’d rather go that route if possible. Anyone with recent firsthand experience with the Belltech spindles? Thank in advance!