Installing roof rail weatherstrip in e-body - Moparts Forums

Register Log In Moparts Forums Moparts Restoration & A12 Forum Installing roof rail weatherstrip in e-body

Print Thread

Installing roof rail weatherstrip in e-body #2826021 09/28/20 01:02 PM 09/28/20 01:02 PM
Joined: Feb 2013 Posts: 141 Missouri R randavis OP member
randavis OP member R Joined: Feb 2013 Posts: 141 Missouri	I am looking for info to install the roof rail weatherstrip on my 74 Challenger. I have looked in the FSM, but it doesn't show the Challenger, but it does show other models. I have the seals from DMT. Also, how do you adjust the anti-blow off clips? 74 Challenger, bought it new. In 1978 I replaced the original 318 with a 446 and 727. Mild cam, Jardine headers, and Holley Sniper EFI. New engine! 511" RB, Edelbrock Performer RPM heads, Eagle rotating assy, Comp hyd roller cam, Doug's 2" headers.

Re: Installing roof rail weatherstrip in e-body [Re: randavis] #2826712 09/30/20 12:04 AM 09/30/20 12:04 AM
Joined: May 2006 Posts: 1,750 Phila P PhillyRag top fuel
PhillyRag top fuel P Joined: May 2006 Posts: 1,750 Phila	Start them off at the front lower edge where the screws are, then work backward. As you install, periodically roll up windows to ascertain a good fit with glass.\ Also helps to "fully" seat the gaskets. Don't use any type of adhesive. There should be holes already there for those retainers.

Re: Installing roof rail weatherstrip in e-body [Re: randavis] #2837345 10/25/20 05:41 PM 10/25/20 05:41 PM
S scotreilly Unregistered
scotreilly Unregistered S	Did it come with it? Kodi nox Last edited by scotreilly; 10/26/20 08:20 AM.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1