|
Re: 2014 ram 2500 to 1500 front end swap???
[Re: HotRodDave]
#2812383
08/23/20 09:08 PM
08/23/20 09:08 PM
|
Joined: Jan 2003
Posts: 43,517 Round Lake Beach, Illinoisy
Rhinodart
Rhinotruck
|
Rhinotruck
Joined: Jan 2003
Posts: 43,517
Round Lake Beach, Illinoisy
|
Hood, grille, bumper, headight filler pieces, and possibly headlights it looks like. What about the tow hooks? Different frame size so not sure what else would change, what about cooling issues, maybe core support changes? Seems like way too many changed to be made to me...
Last edited by Rhinodart; 08/23/20 09:09 PM.
The funny thing about science is that if you change one miniscule parameter you change the entire outcome to the way you want it.
JB Rhinehart, Realist
A-Body's RULE!
|
|
|
Re: 2014 ram 2500 to 1500 front end swap???
[Re: Rhinodart]
#2812570
08/24/20 01:00 PM
08/24/20 01:00 PM
|
Joined: Jan 2003
Posts: 8,021 Tulsa OK
Bad340fish
master
|
master
Joined: Jan 2003
Posts: 8,021
Tulsa OK
|
If they could make them the same I am sure they would due to cost. I think the taller front end is needed for larger radiators, coolers, the tall diesel etc.
68 Barracuda Formula S 340
|
|
|
Re: 2014 ram 2500 to 1500 front end swap???
[Re: HotRodDave]
#2812837
08/24/20 09:53 PM
08/24/20 09:53 PM
|
Joined: Aug 2005
Posts: 5,999 Salem
Grizzly
Moparts Proctologist
|
Moparts Proctologist
Joined: Aug 2005
Posts: 5,999
Salem
|
I was more disgusted with the looks of the HD's and the "grain truck" hood, ugly bumper and hideous filled gap at the headlight. I asked a dealer once to open the hoods of a 1500 and 2500 parked beside it to see if all that ugly schitt could be ditched and put a 1500 front-end on: the rad support where the hood latches looked identical on both trucks so I think it is do-able. As for the springs, you can always cut the coils a bit to drop the front and inch or two. They certainly out-did themselves at the Ugly Tree for the 5th Gen HD's: one showed up at work this winter and it's a tough call on who makes the ugliest 2500 these days. Was good for a laugh at the expense of the contractors who drove them compared to our 1500's.
Mo' Farts
Moderated by "tbagger".
|
|
|
Re: 2014 ram 2500 to 1500 front end swap???
[Re: Grizzly]
#2813073
08/25/20 01:28 PM
08/25/20 01:28 PM
|
Joined: Jan 2005
Posts: 12,419 Kalispell Mt.
HotRodDave
OP
I Live Here
|
OP
I Live Here
Joined: Jan 2005
Posts: 12,419
Kalispell Mt.
|
I was more disgusted with the looks of the HD's and the "grain truck" hood, ugly bumper and hideous filled gap at the headlight. I asked a dealer once to open the hoods of a 1500 and 2500 parked beside it to see if all that ugly schitt could be ditched and put a 1500 front-end on: the rad support where the hood latches looked identical on both trucks so I think it is do-able. As for the springs, you can always cut the coils a bit to drop the front and inch or two. They certainly out-did themselves at the Ugly Tree for the 5th Gen HD's: one showed up at work this winter and it's a tough call on who makes the ugliest 2500 these days. Was good for a laugh at the expense of the contractors who drove them compared to our 1500's. Glad I finally found someone to agree with me on this. I am gonna start looking for someone with a white 1/2 ton that needs to make his truck look like it has a giant schnoz.
I am not causing global warming, I am just trying to hold off a impending Ice Age!
|
|
|
|
|
|