Previous Thread
Next Thread
Print Thread
Page 3 of 4 1 2 3 4
Re: Pro-Werks Billet Fill Cap snd Weld-In Bung - Brand New [Re: 11secdart] #2801970
07/28/20 01:09 AM
07/28/20 01:09 AM
Joined: Dec 2003
Posts: 570
Boise Idaho
6
65coronet500 Offline
mopar
65coronet500  Offline
mopar
6

Joined: Dec 2003
Posts: 570
Boise Idaho
Indy Valley tray with removable plate to access lifters for a 383 / 400 b motor equipped with Indy heads , this valley tray is brand new and Has been powder coated Black Never installed
$ 135 or MAKE OFFER! plus the ride to you PM me here please

Last edited by 65coronet500; 07/30/20 12:10 PM.

All steel 3800 lbs with me in it 65 Coronet 451 CID Indy 440-1 heads by Dwayne Porter racing heads .
..... 10.31 @ 129.4 mph 1.40 60 ft ALL MOTOR!!!!
NEW Meziere electric water pump wp307B [Re: 65coronet500] #2801976
07/28/20 01:21 AM
07/28/20 01:21 AM
Joined: Dec 2003
Posts: 570
Boise Idaho
6
65coronet500 Offline
mopar
65coronet500  Offline
mopar
6

Joined: Dec 2003
Posts: 570
Boise Idaho
I have a brand new never ran but gaskets got glued to the pump then realized that the pump was a Reverse flow style
So wouldn’t work for my setup sooo my loss is your gain
All instructions hardware wire pigtail and it was $600 new
So how bout $450 or MAKE OFFER !plus shipping to you
Pm me here thanks Matt

Last edited by 65coronet500; 07/30/20 12:11 PM.

All steel 3800 lbs with me in it 65 Coronet 451 CID Indy 440-1 heads by Dwayne Porter racing heads .
..... 10.31 @ 129.4 mph 1.40 60 ft ALL MOTOR!!!!
Re: Holley 950 HP [Re: 65coronet500] #2802009
07/28/20 08:09 AM
07/28/20 08:09 AM
Joined: Dec 2007
Posts: 801
east coast
Otherlane Offline
super stock
Otherlane  Offline
super stock

Joined: Dec 2007
Posts: 801
east coast
This is a good used holley 950 that is still on the car. I'm waiting on my dominator to come in. $500 shipped obo

Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2802116
07/28/20 12:13 PM
07/28/20 12:13 PM
Joined: May 2016
Posts: 110
Mopar
Jason B Offline
member
Jason B  Offline
member

Joined: May 2016
Posts: 110
Mopar
6- GRP Aluminum Rods that are 6.125 with a .927 pin bore B/E standard 360 main .925 rods also have 7/16 ARP 2000 bolts.

7- Weisco Pistons 4.185 bore have been lateral gas ported and coated. Standard dome.

OBO- on the pistons and rods all the parts are still available will make good spares or get someone started who is on a budget.


I will also have available soon a Ritter Block 59* with two sets of lifters one being Jesel and the other Crower. Block has a 60mm roller cam tunnel. I have 3 cam cores that can be reground. Also with the package will be a MSD pro billet distributor. Block is freshly machined and ready to be assembled. Fresh hone and dowled thrust main cap to prevent any movement. Absolutley nothing wrong with this block we have fixed all of the issues that once were with the Ritter block we maintained 50-52lbs of oil pressure down track so nothing to worry about on the oiling. I am asking 5000.00 for everything you cant even get close to buying and machining all the parts for this so I feel like its a really good deal.

Our project has just grown to a point of officially jumping off the deep end and we have decided to swap over to a new Ritter 48* block. The 59* block will be available after I receive my new block and can pretty much copy what we have already done.

Thanks, Jason Buckner

Call or text with any questions 936-577-1648


1968 Cuda 440" Edelbrock Victor Head Small Block.
[img]https://board.moparts.org/ubbthreads/upload4/23859.png[/img]
Re: For Sale - Race Parts - 3rd Quarter [Re: Jason B] #2802165
07/28/20 03:04 PM
07/28/20 03:04 PM
Joined: Nov 2006
Posts: 1,910
IL
furious70 Offline
top fuel
furious70  Offline
top fuel

Joined: Nov 2006
Posts: 1,910
IL
MSD pro billet RB/440 Distributor 8546
Used, but not that many passes on it. New is $348, have this one for $200 plus shipping.

SOLD

20200720_125519.jpg (1448 downloads)
Last edited by furious70; 07/29/20 12:14 AM.

70 Sport Fury
68 Charger
69 Coronet
72 RR
Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2802287
07/28/20 08:12 PM
07/28/20 08:12 PM
Joined: Aug 2012
Posts: 298
Leesburg Ga
dagohman Offline
enthusiast
dagohman  Offline
enthusiast

Joined: Aug 2012
Posts: 298
Leesburg Ga
9.2 deck height, 340 mains, 4.04 bore 59 degree block, has standard camshaft size. Will easily clean up at current bore, some slight surface rust from sitting. The bad is a small notch in bottom of 1 cyl, where an outside main bolt came out. The engine had been together 9 yrs, idk how long the bolt had been bouncing around in there. Have correct Arrow timing cover and a M1 that goes with it. I wont separate. No shipping. Leesburg Ga $2800

IMG_4072.jpg (1530 downloads)
IMG_4087.jpg (1519 downloads)
IMG_4083.jpg (1519 downloads)
IMG_4089.jpg (1528 downloads)
Last edited by dagohman; 07/28/20 08:13 PM.
Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2802520
07/29/20 01:21 PM
07/29/20 01:21 PM
Joined: Jan 2017
Posts: 210
Nevada
M
merpar Offline
enthusiast
merpar  Offline
enthusiast
M

Joined: Jan 2017
Posts: 210
Nevada
For sale, new in box. Icon forged pistons for a stroker 400 block. IC825 +.030 Actual piston size is 4.367 with .990 pin. Comp. height is 1.480 . These pistons are for a 3.900 stroke with 6.535 rod length. With 75cc chamber heads gives 11.7 comp.
Also have a set of 4340 I beam rods from Speedmaster. New in box for 2.200 rod journal and .990 pin. I have checked these rods extensively and are sized perfectly. I bought these rods for a 383 stroker build but can't find pistons.
Will sell as a package deal for $500, OBO would be willing to sell each item for a reasonable price. Contact me at jersmerpar@gmail.com or call me at 1775-465-1335 I am in Nevada, outside of Carson City.

Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2803297
07/31/20 01:38 PM
07/31/20 01:38 PM
Joined: May 2016
Posts: 110
Mopar
Jason B Offline
member
Jason B  Offline
member

Joined: May 2016
Posts: 110
Mopar
I have a virtually new Moroso Vacuum pump we took off our small block it was slightly modified to fit within the area around our motor plate. Took it off due to changing up and going with a Daily external setup. I think they list around 800.00 New I’d sell it for 500 plus shipping if anyone is interested.

Thanks Jason Buckner

Call or text if your interested or want pictures 936-577-1648

Last edited by Jason B; 08/03/20 07:31 AM.

1968 Cuda 440" Edelbrock Victor Head Small Block.
[img]https://board.moparts.org/ubbthreads/upload4/23859.png[/img]
Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2803777
08/01/20 03:23 PM
08/01/20 03:23 PM
Joined: Aug 2003
Posts: 14,719
oak park, il.
D
dsd70bee Offline
I Live Here
dsd70bee  Offline
I Live Here
D

Joined: Aug 2003
Posts: 14,719
oak park, il.
1 Pr. of vintage Jere Stahl front runner tires, plenty of tread left $500.00 for the pair (708) 288-2879

parts 8-1-2020 013.JPG (1223 downloads)
parts 8-1-2020 016.JPG (1225 downloads)
parts 8-1-2020 019.JPG (1224 downloads)
parts 8-1-2020 022.JPG (1227 downloads)
Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2804187
08/02/20 01:38 PM
08/02/20 01:38 PM
Joined: Jun 2004
Posts: 1,910
G
gtxblu Offline
top fuel
gtxblu  Offline
top fuel
G

Joined: Jun 2004
Posts: 1,910
for sale a used but like new keith black big block oil pump. $125.00. 1-734-775-0738

P8011132.JPG (1350 downloads)
P8011133.JPG (1337 downloads)
P8011134.JPG (1341 downloads)
Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2804302
08/02/20 04:27 PM
08/02/20 04:27 PM
Joined: May 2016
Posts: 110
Mopar
Jason B Offline
member
Jason B  Offline
member

Joined: May 2016
Posts: 110
Mopar
15x4.5 Weld Aluma Stars tires in good used condition

15x15 Weld Aluma Stars with 6” backspace.

I’ll sell the slicks with them if someone is interested 1600.00 obo

Thanks, Jason call or text with any questions

936-577-1648


1968 Cuda 440" Edelbrock Victor Head Small Block.
[img]https://board.moparts.org/ubbthreads/upload4/23859.png[/img]
Re: For Sale - Race Parts - 3rd Quarter [Re: Jason B] #2804410
08/02/20 05:57 PM
08/02/20 05:57 PM
Joined: Aug 2003
Posts: 14,719
oak park, il.
D
dsd70bee Offline
I Live Here
dsd70bee  Offline
I Live Here
D

Joined: Aug 2003
Posts: 14,719
oak park, il.
1 Pr. of vintage Firestone Drag 500 Drag slicks $500.00 for the pair (708) 288-2879

parts 8-1-2020 027.JPG (1285 downloads)
parts 8-1-2020 029.JPG (1288 downloads)
parts 8-1-2020 031.JPG (1288 downloads)
parts 8-1-2020 036.JPG (1289 downloads)
Set of Weld Pro Drag Alumastar 2.0 s and M/T drag tires [Re: dsd70bee] #2804440
08/02/20 06:50 PM
08/02/20 06:50 PM
Joined: Feb 2005
Posts: 2,658
owt west
Thread Ender1 Offline
master
Thread Ender1  Offline
master

Joined: Feb 2005
Posts: 2,658
owt west
Set of Weld Pro Drag Alumastar 2.0 s and M/T drag tires

New Never used installed on car !!!
Rims were almost 2 months to ship, made to order
Set of 15 x 3 1/2" with 1 1/4 " backspacing
front Weld Racing part # 88-504200 Weld Pro Drag Alumastar 2.0
Set of 15 x 9" with 5 " backspacing
rear Weld Racing part # 88-509210 Weld Pro Drag Alumastar 2.0
front part # 30091 -27.5/4.0-15 ET FRONT
rear part # 3754X -P275/60R15 ET STREET RADIAL
Located Southern California

Rather sell local unless buyer can make pick up arrangements.

$2300 obo
Serious only please, please message

IMG_7635.JPG (1270 downloads)
IMG_7636.JPG (1268 downloads)
IMG_7637.JPG (1279 downloads)
Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2804448
08/02/20 07:06 PM
08/02/20 07:06 PM
Joined: May 2016
Posts: 110
Mopar
Jason B Offline
member
Jason B  Offline
member

Joined: May 2016
Posts: 110
Mopar
Power Glide for sale fresh rebuilt ready to go. Reid case 1.80 low gear straight cut gears roller everything trick of the week rated at 1300 HP. Transmission has a pro brake and is really fast works great!!! Spec’s in the picture. I’ll sell the transmission and shifter together we are going to upgrade to accommodate the extra HP we started making. I also have 3 convertors that can be bought I have 2-8” ATI’s and 1- A1 custom 7”

The transmission and shifter I’ll let go for 4500.00

Convertors are 850.00 for the ATI’s and 1000 for the 7” A1 it’s super trick and 1500 new.

Text or call Jason Buckner 936-577-1648


Last edited by Jason B; 08/02/20 08:23 PM.

1968 Cuda 440" Edelbrock Victor Head Small Block.
[img]https://board.moparts.org/ubbthreads/upload4/23859.png[/img]
Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2804473
08/02/20 08:30 PM
08/02/20 08:30 PM
Joined: May 2016
Posts: 110
Mopar
Jason B Offline
member
Jason B  Offline
member

Joined: May 2016
Posts: 110
Mopar
Up for sale is our 59* Ritter block with a 4.197 bore and standard 360 mains. Standard deck 9.56 and .903 lifter bores and 60mm roller cam tunnel . The block is fresh honed, thrust main has been dowled for stability. Included in this price is 2 sets of lifters the first set we used were Crowers that were clearanced to fit the block and oil properly the second and what was currently used are Jesel tie bar no expense was spared on this build many probably saw pictures through out our build this engine made power to 9k guys and on our dyno made 920 we have several time slips in the 8.50s at 2800lbs. I will also add to this package 3- 60mm cam cores 2 need to be reground one is good ready to go the specs and pictures will be below. I also have a oil pan and pump I’ll throw in. I also have a brand new set of main bearing also included.I am sure I am forgetting something. All of this will be available in a few weeks as I am waiting on my new Ritter block we have just decided to swap to a 48* setup because our combo has just gotten too crazy and well to be honest we’ve probably lost our mind lol...

Please call or text with any questions and more pictures I can only post 4. Let’s make a package deal I have several things posted.

Jason Buckner 936-577-1648 or
Ray Buckner 936-662-5454

I know it seems like I asking a lot of money but those of you who know what it really costs then you understand. Just the Jesel lifters in this deal are about 2k so add in the cost of a new block and machine work and let’s not forget all the headaches fighting the oiling issues that are already done we maintained 58-62 lbs down track all the work is done guys this block is ready to go.

Price is 6500.00 OBO

Thanks, Jason

Last edited by Jason B; 08/02/20 08:35 PM.

1968 Cuda 440" Edelbrock Victor Head Small Block.
[img]https://board.moparts.org/ubbthreads/upload4/23859.png[/img]
Re: For Sale - Race Parts - 3rd Quarter [Re: Jason B] #2805258
08/04/20 11:27 PM
08/04/20 11:27 PM
Joined: Jul 2012
Posts: 401
Washington
skrews Offline
mopar
skrews  Offline
mopar

Joined: Jul 2012
Posts: 401
Washington
Holley 650 Double Pumper 4777-1
Got in trade deal and don't need. Popped it apart, looks good to go.
$250 obo plus shipping
located 99323
PayPal plus fee, or USPS money order

Re: For Sale - Race Parts - 3rd Quarter [Re: skrews] #2805345
08/05/20 10:43 AM
08/05/20 10:43 AM
Joined: Aug 2003
Posts: 4,345
new jersey usa
1
11secdart Offline
master
11secdart  Offline
master
1

Joined: Aug 2003
Posts: 4,345
new jersey usa
For Sale Pair of Phoenix 7.75-15 tires in good shape $50 /. Fiberglass front bumper for 67-69 Dart $50 sorry no shipping lbvracing@aol.com or pm

IMG_2734.JPG (908 downloads)

08 1500 Quad Cab Hemi 4x4
92 D150 5.2 (318) 2WD,shortbed,original owner, 10 time Trophy Class Winner @ Mopar Meets
68 Dart 408 ci, R3, Indy Heads, pump gas, 904, 3,150 lbs, footbrake, mid 11's on purpose
2013 Island Dragway Street Eliminator Points Champion
2014 Raceway Park ( R.I.P. 2018 ) 11.50 Index Points Champion
Hurst B//E body shifter [Re: 65coronet500] #2806196
08/07/20 03:29 PM
08/07/20 03:29 PM
Joined: Apr 2007
Posts: 1,266
CA.
RAY1969CARS Offline
pro stock
RAY1969CARS  Offline
pro stock

Joined: Apr 2007
Posts: 1,266
CA.
Used but nice hurst 4 speed Shifter with reverse lockout all rods and mount
new rods are 200 mount 200 from hurst. Super shifters are 350 and Lock out lever is an extra 100

350 plus Actual shipping
Pictures of shifter on trans are not my og picture

Re: For Sale - Race Parts - 3rd Quarter [Re: moparts] #2806507
08/08/20 10:58 AM
08/08/20 10:58 AM
Joined: Aug 2003
Posts: 1,243
Way out in the sticks of Weste...
D
DusterDog Offline
pro stock
DusterDog  Offline
pro stock
D

Joined: Aug 2003
Posts: 1,243
Way out in the sticks of Weste...
New M/T # 3055 slicks (10.5/28 X15) mounted on wheels, rolled around the garage a few times, then taken off the wheels..

$375.00 for the pair, $425.00 with inner tubes.

PM me here (1st preference) or, e-mail me at duster doug at Comcast dot net..

Thanks for the ad Moparts!!


"I've upped my horsepower, so...... UP YOURS!!!"
Meziere Electric Water Pump for Small Block [Re: Rocket] #2806880
08/09/20 02:21 PM
08/09/20 02:21 PM
Joined: Feb 2006
Posts: 640
CT
R
Rocket Offline
mopar
Rocket  Offline
mopar
R

Joined: Feb 2006
Posts: 640
CT
I have a newly rebuilt Meziere 35 Gallon Per Hour electric water pump for small blocks part # WP114U. Included are the pump, water pump block off plate and two sets of new gaskets. The pump had not been run since being inspected and rebuilt by Meziere.

Price is $360 shipped in the lower 48 states.

Email me at procketrichard@hotmail.com with any questions or for more pictures.

Meziere WP Pic 1.jpg (534 downloads)
Meziere WP Pic 2.jpg (534 downloads)
Meziere WP Pic 3.jpg (535 downloads)
Meziere WP Pic 4.jpg (537 downloads)
Last edited by Rocket; 08/10/20 06:38 PM. Reason: updated description
Page 3 of 4 1 2 3 4




Powered by UBB.threads™ PHP Forum Software 7.7.1