Wanted to read about the Stage V heads. I know they have been discussed on here.

Search function does not like "Stage V" or "Stage 5".

Wanted to read about others problems/experiences/successes.

My brother, myself and friends of ours have used the big valve and Millennium heads in blown and N/A applications with zero issues. The Barton rockers are a good upgrade, as well.

They are quality castings and make decent power, considering the head is quite dated compared to many current brand x offerings.

Hello Jim,
I am considering getting the regular port heads. At the moment, my question is, Do they need external oil drainback lines ?

Or, does it depend on which block they would go on ? Do some blocks have drainback provisions and other blocks not ?

I am using the Stage V replacement heads . They do not require external oil drain-back lines. The block is a World aluminum .
I am also using the Stage V rockers and I am happy with them as well.

Mark

Thank you Allstate !

Stage V offers several different castings, race versus street, that will bolt onto a stock or after market block with no issues
Nice, good parts

Thanks Cab,

There's still no Search hits, even after this post !

The search functions on most boards leaves alot to be desired and doesn't work more than half the time.

You'll have a whole lot more reading material doing it this way:

Search #1

or this way

Search #2

Call me. I can answer any questions you have about those heads.
fastmanefi.com
Rich Nedbal