Previous Thread
Next Thread
Print Thread
Page 10 of 10 1 2 8 9 10
Re: test pic 68 turbo dart project [Re: FastmOp] #2792617
07/04/20 12:48 PM
07/04/20 12:48 PM
Joined: Dec 2004
Posts: 743
davenport iowa
P
paul69cuda Offline OP
super stock
paul69cuda  Offline OP
super stock
P

Joined: Dec 2004
Posts: 743
davenport iowa
so its been so long since i have worked with Alumi parts i stripped my drain plug on the trans pan after 3 times of changing the Hyd 303 fluid to flush out the trans system. and let me tell u the dip stick tube that the fluid goe's in is about the size of a pencil so it takes 3 hours to get 4 quarts in.

Re: test pic 68 turbo dart project [Re: paul69cuda] #2792759
07/04/20 08:22 PM
07/04/20 08:22 PM
Joined: Jan 2004
Posts: 624
IL
D
Dart451 Offline
mopar
Dart451  Offline
mopar
D

Joined: Jan 2004
Posts: 624
IL
Nice shakedown runs!

Re: test pic 68 turbo dart project [Re: paul69cuda] #2792839
07/05/20 06:18 AM
07/05/20 06:18 AM
Joined: Aug 2008
Posts: 3,317
Mo.
racerx Offline
master
racerx  Offline
master

Joined: Aug 2008
Posts: 3,317
Mo.
Originally Posted by paul69cuda
so its been so long since i have worked with Alumi parts i stripped my drain plug on the trans pan after 3 times of changing the Hyd 303 fluid to flush out the trans system. and let me tell u the dip stick tube that the fluid goe's in is about the size of a pencil so it takes 3 hours to get 4 quarts in.


funny you say this I just stripped out the drain plug on my oil pan,i'll be watching this for the fix sawzall weld

Re: test pic 68 turbo dart project [Re: racerx] #2792927
07/05/20 11:34 AM
07/05/20 11:34 AM
Joined: Sep 2003
Posts: 13,240
north of coder
moparx Offline
"Butt Crack Bob"
moparx  Offline
"Butt Crack Bob"

Joined: Sep 2003
Posts: 13,240
north of coder
how thick is the pan casting ?
does it have a dedicated thick bung for the plug ?
is there enough material to tap to the next oversize thread ?
beer

Re: test pic 68 turbo dart project [Re: moparx] #2793405
07/06/20 01:11 PM
07/06/20 01:11 PM
Joined: Dec 2004
Posts: 743
davenport iowa
P
paul69cuda Offline OP
super stock
paul69cuda  Offline OP
super stock
P

Joined: Dec 2004
Posts: 743
davenport iowa
just dropped pan off at tinworks and he is going to drill and tap it with a new plug. the trans is a Proformance 2 sp T400 with a Reid Case and Bell Housing it is a very nice piece and thick and it is SFI everything so no shield required wich is nice.

Re: test pic 68 turbo dart project [Re: paul69cuda] #2818011
09/06/20 10:36 PM
09/06/20 10:36 PM
Joined: Dec 2004
Posts: 743
davenport iowa
P
paul69cuda Offline OP
super stock
paul69cuda  Offline OP
super stock
P

Joined: Dec 2004
Posts: 743
davenport iowa
Had a good weekend at cordova dragway met some cool guys from moparts and got 4 passes in first pass was a clean pass. left on transbrake 4lbs of boost and went to 8lbs 1.52 60ft - 6.434 at the 1/8th at 109.9. next pass was i was going to 12lbs but driver error on my part bigtime then the night was over so i decided to go back sat for another try. so i got their sat made a clean pass but i did not stage proper so i did not get a time slip. so now i had to wait 2 hours last pass T/B leave 4lbs go to 12 lbs boost 1.52 60 foot - 6.21 1/8 mile at 115.74. the funny thing is i want to read the data but i have no idea how to get to it RACE PAC or my FAST E.F.I system BUHAHAHAHAHAHAHAHA. If anyone who was there has any photo's please post i would love to see them.

Page 10 of 10 1 2 8 9 10






Powered by UBB.threads™ PHP Forum Software 7.7.1