Engine Bay Splash Shields - Moparts Forums

Register Log In Moparts Forums Moparts Question and Answer Engine Bay Splash Shields

Print Thread

Engine Bay Splash Shields #2790442 06/28/20 07:09 PM 06/28/20 07:09 PM
Joined: Feb 2015 Posts: 265 Philadelphia, PA GTXKARL OP enthusiast
GTXKARL OP enthusiast Joined: Feb 2015 Posts: 265 Philadelphia, PA	Hello. How hard is it to replace the two engine bay splash shields in a 1970 Plymouth GTX with the engine still in? Thank you. “Working on cars teaches you patience... and every curse word imaginable.” 1970 Plymouth GTX -- A true gentleman's coupe, but a serious muscle machine.

Re: Engine Bay Splash Shields [Re: GTXKARL] #2790448 06/28/20 07:20 PM 06/28/20 07:20 PM
Joined: Jun 2003 Posts: 21,400 It's a dry heat gtx6970 Too Many Posts
gtx6970 Too Many Posts Joined: Jun 2003 Posts: 21,400 It's a dry heat	Actually, there are 4 total. 2 metal ones towards the front , these 2 have screws holding them. piece of cake to change. then there are 2 rubber flap types towards the rear. drive side is under and behind the left front tire pass side goes in from engine side ,,,and IMO is the hardest one to change, and even its not that hard

Re: Engine Bay Splash Shields [Re: gtx6970] #2790763 06/29/20 07:46 PM 06/29/20 07:46 PM
Joined: Feb 2015 Posts: 265 Philadelphia, PA GTXKARL OP enthusiast
GTXKARL OP enthusiast Joined: Feb 2015 Posts: 265 Philadelphia, PA	Thank you “Working on cars teaches you patience... and every curse word imaginable.” 1970 Plymouth GTX -- A true gentleman's coupe, but a serious muscle machine.

Moderated by Al_Alguire, Hotwheelsjr, moparts, not_a_charger, RangerDan440, tboomer

Hop To

Powered by UBB.threads™ PHP Forum Software 7.7.1