Just installed the MSD Cam syncronization in to my #1 spark plug and in to my Figital 7 7531 box.
Anyone use one of these and where did you start plotting in your MSD software on your laptop?

Sorry, I can't be of any help but why do you need this?

Is that box capable of Coil near Plug ignition?

I guess I would check with MSD support to see if they can help.

Thanks!

Because I want to pull timing out of certain hot cylinders for maximum ET & MPH.

Hopefully MSD Tech help me out tomorrow and I dont get rushed off the phone
I figured that this isn't a popular add on and I knew I wasn't going to get much of a response. This one is definitely past my pay grade.

Well, the 1st thing is to go to rockauto and order about 40 plugs because every time you takeaway timing from a cylinder it gets a new plug. Not knowing what type of fuel system you have, so i not sure how much individual cylinder adjustment you have.
It's a lot of fun to play with but it might have been worth .02-.03 at most.

Joe

Thanks for the update, let us know what you find out and how it works.

I learned in short order that I needed this, lifted the head 2x's in about 10, 8th mile passes. I trenched the head and the last time the block too, on my f2 w8 deal. Brett M tried to tell me before I started......

Same here. Brett warned me too.